JournalTOCs

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Subjects -> ELECTRONICS (Total: 207 journals)

The end of the list has been reached or no journals were found for your choice.

Most Followed Journals

Top Publishers

Top Subjects

Similar Journals

International Journal of Microwave and Wireless Technologies
Journal Prestige (SJR): 0.184

Citation Impact (citeScore): 1
Number of Followers: 11

Hybrid journal (It can contain Open Access articles)
ISSN (Print) 1759-0787 - ISSN (Online) 1759-0795
Published by Cambridge University Press

[352 journals]

EuCAP 2021 special issue
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Quevedo-Teruel; Oscar, Castañer, Manuel Sierra, Monni, Stefania
  Pages: 1 - 2
  PubDate: 2023-03-01
  DOI: 10.1017/S1759078723000107
MRF volume 15 issue 1 Cover and Front matter
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Pages: 1 - 2
  PubDate: 2023-03-01
  DOI: 10.1017/S1759078723000181
MRF volume 15 issue 1 Cover and Back matter
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Pages: 1 - 1
  PubDate: 2023-03-01
  DOI: 10.1017/S1759078723000193
Passive intelligent reflecting surfaces based on reflectarray panels to
enhance 5G millimeter-wave coverage
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Martinez-de-Rioja; Eduardo, Vaquero, Álvaro F., Arrebola, Manuel, Carrasco, Eduardo, Encinar, Jose A., Achour, Maha
  Pages: 3 - 14
  Abstract: This paper presents the design of two passive shaped-beam reflectarrays acting as passive intelligent reflecting surfaces (IRSs) to enhance 5G millimeter-wave coverage in the 27.2–28.2 GHz band. The reflectarray panels have been designed to generate a broadened and deflected beam in dual-linear polarization (horizontal and vertical). The reflectarray cell provides a robust performance under incidence angles of up to 50°, with more than 360° of phase variation range. Phase-only synthesis based on the generalized intersection approach has been applied to obtain the phase distribution on each reflectarray panel, so that their radiation patterns comply with the beamwidth and pointing requirements of the scenario under study. The two reflectarrays show a stable performance in the 27.2–28.2 GHz band in terms of gain, side-lobe level, and cross-polarization. The results confirm the potential of this technology to implement passive low-cost IRSs that will contribute to improve millimeter-wave coverage in 5G wireless networks.
  PubDate: 2022-06-29
  DOI: 10.1017/S1759078722000721
Parabolic reflectarray antenna to generate multiple beams for
geostationary high throughput satellites in Ka-band
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Martinez-de-Rioja; Daniel, Martinez-de-Rioja, Eduardo, Rodriguez-Vaqueiro, Yolanda, Encinar, Jose A., Pino, Antonio, Arias, Marcos, Arrebola, Manuel, Toso, Giovanni
  Pages: 15 - 24
  Abstract: This contribution describes the design and simulations of a multibeam 1.8 m parabolic reflectarray antenna for geostationary high throughput satellites (HTS) in Ka-band. The parabolic reflectarray generates two orthogonal circularly polarized beams per feed simultaneously at 19.7 and 29.5 GHz, by the variable rotation technique. The antenna is made of 62 654 reflectarray cells, which include two types of printed elements independently rotated and adjusted. The elements have been optimized one by one to ensure the required phase-shift at each frequency. A novel design approach has made it possible to promptly obtain an initial layout of every element with a very low computational cost. The simulated radiation patterns show that the parabolic reflectarray, illuminated by 27 dual-circularly polarized feeds, can generate 54 spot-beams in two orthogonal polarizations, with a beam spacing of 0.56° between adjacent beams. The design and simulation tools have been validated by a parabolic reflectarray scaled in a factor of 0.5, which has been manufactured and tested. The proposed reflectarray would allow to generate a complete multi-spot coverage from a geostationary HTS with only two parabolic reflectarrays, instead of four reflector antennas, also reducing the number of feeds by half, since every feed generates two beams.
  PubDate: 2022-03-31
  DOI: 10.1017/S1759078722000411
Active 5G radio resource management measurements using a multiple CATR
reflector system
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rowell; Corbett, Cardalda Garcia, Adrian, Derat, Benoit
  Pages: 25 - 31
  Abstract: This paper presents results for active and passive measurements using a novel method based on multiple compact antenna test range (CATR) reflectors to perform simultaneous multiple angle measurements in order to characterize the beam-forming characteristics in a real environment of the 5G devices operating in the millimeter wave frequency band: 24–44 GHz. The over-the-air (OTA) system generates four planar wavefronts with different incidence angles, realizing up to five pairs of angular spreads or four switched/simultaneous angles of arrival. The initial target application is radio resource management (RRM) testing, where the execution of mobility procedures and radio link monitoring of a 5G millimeter wave device are evaluated. The applicability of the multi-reflector approach to RRM testing is measured with commercial 5G handsets, through three test scenarios. The paper demonstrates that baseband (non OTA) testing is not sufficient for RRM FR2, as the results are influenced by the direction of arrival of the signal. It is further shown that OTA testing in a multi-reflector CATR system and a careful selection of a representative set of test directions is critical for full characterization of the performance of a wireless device operating in the millimeter wave bands.
  PubDate: 2022-11-08
  DOI: 10.1017/S1759078722001167
A novel approach to non-invasive blood glucose sensing based on a
single-slot defected ground structure
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mansour; Esraa, Allam, Ahmed, Abdel-Rahman, Adel B.
  Pages: 32 - 40
  Abstract: In this study, we explore a novel approach to measure blood glucose concentration in a non-invasive way using a compact defected ground structure (DGS) filter. The proposed sensor is promising because it is cost-effective, compact, non-ionizing in nature, and convenient for diabetics. Therefore, a portable microwave biosensor can be utilized using these features. In this study, we present a single DGS sensor which is designed on a Rogers RO4003C substrate and fed by a 50 Ω microstrip line, and operating in the industrial, scientific, and medical radio bands (2.4–2.5 GHz). The changes in dielectric properties in blood are mainly relying on glucose concentrations. The main concept of using a sensor is by placing a finger on the sensing area (the slot). The filter is demonstrated by simulations using CST Microwave Studio. Additionally, the blood layer with different glucose concentrations from 250 to 16 000 mg/dl is presented by the Cole–Cole model. The sensor can achieve a relatively good sensitivity of 7.8285 kHz/mg/dl. The size of the fabricated sensor is 40 × 40 × 0.883 mm3, which is suitable for hand-held use.
  PubDate: 2022-02-22
  DOI: 10.1017/S1759078722000174
Leveraging frequency agility of an MIMO antenna cluster with a transmitter
IC
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Saleem; Ali Raza, Luomaniemi, Rasmus, Lehtovuori, Anu, Stadius, Kari, Kosunen, Marko, Viikari, Ville, Ryynänen, Jussi
  Pages: 41 - 50
  Abstract: This paper presents the prototype demonstration where an integrated transmitter circuit drives a mobile handset terminal antenna in order to provide frequency tunability and multiple input multiple output (MIMO) operation across the 0.5–4.5 GHz frequency range. The transmitter implementation incorporates on-chip weighted signal generation, i.e. amplitude and phase scaling to provide sufficient MIMO performance in the low band (700–960 MHz) and in the high band (1.5–4.5 GHz). In the transmitter, two antenna elements are used for MIMO operation in the low band and another two in the high band. The transmitter integrated circuit (IC) is fabricated in a 28 nm bulk CMOS technology with an active on-chip area of 0.2 mm. A custom antenna measurement procedure is proposed here in order to support and verify active antenna measurements with transmitter IC. A measurement procedure for the transmitter system comprising the transmitter IC and four antenna clusters is developed and discussed in comparison with traditional passive antenna measurements. The measurement results demonstrate that the transmitter IC driving the antenna clusters provides total antenna efficiency of dB to dB, and envelope correlation coefficient below 0.4 across the designated frequency bands. The results indicate that the implemented transmitter IC successfully tunes frequency response of the antenna clusters, and enhances the MIMO operation of such mobile antennas.
  PubDate: 2022-03-23
  DOI: 10.1017/S1759078722000344
Sub-terahertz propagation characteristics up to 150 GHz for 6G mobile
communication systems
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Inomata; Minoru, Yamada, Wataru, Kuno, Nobuaki, Sasaki, Motoharu, Kitao, Koshiro, Nakamura, Mitsuki, Tomie, Takahiro, Oda, Yasuhiro
  Pages: 51 - 58
  Abstract: Extreme-high-speed communication exceeding 100 Gbps is one requirement for 6G. To satisfy extreme-high-speed-communication, one solution is to utilize terahertz bands above 100 GHz. To determine the new radio-interface technologies and service frequency bands for 6G, terahertz propagation characteristics above 100 GHz need to be understood. In this paper, we introduce our new radio-network topology for 6G and then show the frequency dependency of key propagation phenomena such as the characteristics of path loss in an urban environment, human blockage, and scattering from a rough building surface up to 150 GHz. Human blockage loss increases and the scattering is more diffused as the frequency increases. In the path-loss characteristics, it was found that path-loss frequency dependency is stronger than that given by conventional path-loss model because of scattering effects from a rough building surface.
  PubDate: 2022-04-12
  DOI: 10.1017/S1759078722000459
Sub-THz Luneburg lens enabled wide-angle frequency-coded identification
tag for passive indoor self-localization
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kadera; Petr, Sánchez-Pastor, Jesús, Schmitt, Lisa, Schüßler, Martin, Jakoby, Rolf, Hoffmann, Martin, Jiménez-Sáez, Alejandro, Lacik, Jaroslav
  Pages: 59 - 73
  Abstract: An earlier version of this paper was presented at the 2021 15th European Conference on Antennas and Propagation (EuCAP) and was published in its Proceedings. This paper describes a design, fabrication, and characterization of a planar frequency-coded retroreflector for indoor localization. The retroreflector is fabricated in high-resistive silicon and consists of a Luneburg lens antenna and a photonic crystal high-Q resonator reflective layer, providing ranging and identification within the same tag and bandwidth. The Luneburg lens antenna presents a measured gain of 21.63 dBi at a design frequency of 240 GHz. The frequency-coded retroreflector allows for ranging in a continuous 130 degree angular range in azimuthal plane, with a discrete but repeatable two-resonance identification over multiples of 15 degree. Its maximum measured radar cross-section is −23.48 dBsqm at a frequency of 240 GHz. The retroreflective tag set in ideal line-of-sight situation is compared to a non-line-of-sight arrangement showing the influence of a metallic rod as an obstacle on the overall tag detection parameters. Finally, the successful read-out of the retroreflective tag is discussed in unknown environments, where no a-priori information is available.
  PubDate: 2022-05-13
  DOI: 10.1017/S175907872200054X
Fill level measurements using an M-sequence UWB radar
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wegner; Tim Erich, Gebhardt, Stefan, Del Galdo, Giovanni
  Pages: 74 - 81
  Abstract: Due to increasingly complex and automated manufacturing processes, the demands on the control parameters of these processes are also increasing. In many applications, such a parameter is the fill quantity, whose precise determination is of ever growing importance. This paper shows with which accuracy and precision an M-sequence ultra-wideband radar can determine levels in small metallic and non-metallic containers with contact-based and contactless measurements. First, the principle of level measurement using guided wave radar is explained and the measurement setup is described. Afterward, the measurement results are shown and discussed. The measurements show that the level can be measured with an accuracy of better than 0.5 mm. In addition, level fluctuations can be detected with a precision of 3 m. Based on the results of the guided wave radar, the possibilities of volumetric contactless measurement using an electrically small patch antenna are discussed. A particular challenge in contactless level measurement is the high number of multipath components, which strongly influence the accuracy. In addition, there are near-field effects when measuring close to the antenna. Exploiting these near-field effects, an additional method to accurately determine the full state of the container is investigated.
  PubDate: 2022-05-10
  DOI: 10.1017/S1759078722000502
Physical model-driven deep networks for through-the-wall radar imaging
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wang; Yuhao, Zhang, Yue, Xiao, Mingcheng, Zhou, Huilin, Liu, Qiegen, Gao, Jianfei
  Pages: 82 - 89
  Abstract: In order to merge the advantages of the traditional compressed sensing (CS) methodology and the data-driven deep network scheme, this paper proposes a physical model-driven deep network, termed CS-Net, for solving target image reconstruction problems in through-the-wall radar imaging. The proposed method consists of two consequent steps. First, a learned convolutional neural network prior is introduced to replace the regularization term in the traditional iterative CS-based method to capture the redundancy of the radar echo signal. Moreover, the physical model of the radar signal is used in the data consistency layer to encourage consistency with the measurements. Second, the iterative CS optimization is unrolled to yield a deep learning network, where the weight, regularization parameter, and the other parameters are learnable. A quantity of training data enables the network to extract high-dimensional characteristics of the radar echo signal to reconstruct the spatial target image. Simulation results demonstrated that the proposed method can achieve accurate target image reconstruction and was superior to the traditional CS method, in terms of mean squared error and the target texture details.
  PubDate: 2022-02-03
  DOI: 10.1017/S1759078722000071
Broadband high gain cavity resonator antenna using planar electromagnetic
bandgap (EBG) superstrate
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Dey; Soumik, Dey, Sukomal
  Pages: 90 - 101
  Abstract: This paper presents a broadband miniaturized Fabry–Perot cavity resonator antenna (CRA) made of novel electromagnetic bandgap (EBG) superstrate as partially reflecting surface (PRS) and reactive impedance surface (RIS) backed rectangular patch antenna. To the best of the authors' knowledge, the proposed EBG exhibits the highest stopband bandwidth (BW) with a bandgap existing between 7.37 and 12.4 GHz (50.9%). Frequency-selective property of the EBG is utilized under plane wave incidence to demonstrate it as PRS superstrate in CRA antenna. The cavity is excited with a rectangular microstrip antenna which is made of two dielectric substrates with an additional RIS layer sandwiched between them. The RIS provides wideband impedance matching of the primary feed antenna. A 7 × 7 array of the EBG superstrate is loaded over the patch antenna having an overall lateral dimension of only 45 × 45 mm2 or 1.62 λ0 × 1.62 λ0 where λ0 is the free space wavelength at the center frequency of 10.8 GHz. The proposed Fabry–Perot CRA (FP-CRA) achieves gain enhancement of 6.59 dB as compared with the reference antenna and has a 10 dB return loss BW of 23.79% from 10.07 to 12.79 GHz. A prototype of the FP-CRA is fabricated and experimentally tested with single and dual layers of EBG superstrate. Measured results show BWs of 21.5 and 24.8% for the two cases with peak realized gain of 12.05 and 14.3 dBi, respectively. Later a four-element antenna array with corporate feeding is designed as the primary feed of the CRA. The simulation result shows a flat gain of>13 dBi with gain variation
  PubDate: 2022-01-11
  DOI: 10.1017/S1759078721001768
CPW-fed printed tapered slot antenna loaded by a wideband stacked
artificial magnetic conductor with a progressed performance
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Malekpoor; Hossein, Hamidkhani, Mehdi
  Pages: 102 - 111
  Abstract: A low profile printed slot antenna (PSA) backed by broadband stacked artificial magnetic conductor (AMC) is introduced in this study. First, a suggested PSA with the radiating tapered slots excited by coplanar-waveguide (CPW) is used to expand the bandwidth in the measured range of 9.05–10.95 GHz (S11 ≤ −10 dB). Then, the suggested stacked AMC surface as the ground plane of the antenna is inserted into the PSA to gain improved radiation efficiency. The realized result from the PSA with the 11 × 17 stacked AMC array exhibits −10 dB measured impedance bandwidth from 6.97 to 13.34 GHz (62.73%). The suggested PSA with AMC compared to the PSA without AMC exhibits a size reduction of 52%, enhanced bandwidth of almost 44%, and excellent impedance matching with uni-directional radiation patterns. The novel AMC unit cell is realized based on the recognized method of stacked elements. The stacked AMC design operates at 10.63 GHz with an AMC bandwidth of 8–12.84 GHz (45.8%) for X-band operation. Besides, by introducing a specific method based on the reflection results of the equivalent waveguide feed, the number of AMC unit cells is investigated to obtain an optimal AMC array. In this approach, an equivalent waveguide feed corresponding to the center operating frequency is considered to choose the number of AMC array reflector.
  PubDate: 2022-02-02
  DOI: 10.1017/S1759078722000046
A miniaturized design of Vicsek snowflake-box fractal microstrip patch
antenna using defective ground structure for wireless applications
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kattimani; Bharamappa, Patil, Rajendra R
  Pages: 112 - 119
  Abstract: In this paper, miniaturization of fractal geometry with defected ground structure (DGC) concept has been experimentally verified at S-band (2–4) GHz. The design starts with a self-symmetry structure using conventional Vicsek snowflake-box fractal antenna. The same has been used in third iteration to achieve miniaturization. This proposed microstrip patch antenna (MPA) is resonating at 2.12 GHz with acceptable gain and broadside radiation. The miniaturization of about 87.26% when compared to conventional fractal MPA is achieved. The fractal unit cell is optimized for miniaturization and bandwidth by carrying out parametric study and applying the DGS shapes like rectangular and U-shaped slot etched in the ground plane of Vicsek snowflake-box fractal microstrip antenna. A fractal microstrip antenna is designed for wireless applications at 3.95 GHz. The fractal microstrip antenna is simulated using HFSS-V15 simulator. It is observed that the maximum size reduction of 87.26% is achieved in the third iteration of the Vicsek snowflake-box fractal radiating patch. The proposed fractal patch antenna is designed and fabricated using epoxy substrate of FR-4 with dielectric constant of 4.4 and thickness of 1.6 mm. The simulated results are compared with the measured results.
  PubDate: 2022-02-03
  DOI: 10.1017/S1759078722000083
Design and analysis of circular microstrip patch probe array for precise
specific absorption rate measurement at quad-band
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Naik; Bhukya Venkanna
  Pages: 120 - 128
  Abstract: This paper distinguishes the design and analysis of 3 × 2 circular microstrip patch probe array for specific absorption rate (SAR) measurement at quad-band. This novel approach consists of FR4 substrate radial dimension of 88 mm and it has six circular array elements with a radius of 17 mm; out of these six elements, three array elements are having rectangular slots with dimensions of 1.8 × 1.5 × 1.5 mm3. The array elements are coupled with six probes which have a dimension of 100 mm with a 2.5 mm tip radius; these six probes are embedded into a tissue-equivalent liquid-filled human head mannequin. In this mannequin, instantaneous SAR at any six positions has been investigated. The proposed design resonates at 1.8, 2.1, 2.4, and 2.5 GHz with a return loss of −11.53, −15.90, −15.73, and −25.49 dB. The circular microstrip probe array is fed by a 50 Ohm coaxial feed. In addition, the 3D human head model analysis is also presented. The precisely estimated SAR values are 0.135, 0.108, 0.167, and 0.244 W/kg at 1 g of tissue. For the traceable measurements, each source of uncertainty budget has been estimated.
  PubDate: 2022-02-07
  DOI: 10.1017/S1759078722000101
Performance analysis of double-face logarithmic spiral metamaterial
superstrate for full enhancement of circularly polarized 5G spiral patch
antenna investigated using characteristic mode analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Abdelaziz; Ahmed, Mohamed, Hesham A., Hamad, Ehab K. I.
  Pages: 129 - 142
  Abstract: In this article, a novel double-face logarithmic spiral metamaterial (LSMTM) superstrate-inspired multiple-input multiple-output (MIMO) for fully enhanced circularly polarized (CP) antenna system is examined for 5G wireless communications. This novel double-face LSMTM superstrate acts as a planar concave-concave lens. Initially, the antenna is designed with a circular spiral patch to generate CP radiation in the frequency band of interest. Then, at a height of 6.5 mm (0.606 λo) above the MIMO antenna, which has a 0.8 mm (0.075 λo) edge-to-edge separation, the LSMTM superstrate is employed for isolation, gain, and bandwidth improvement. The proposed superstrate enhances the isolation, gain, and bandwidth of the antenna by about 32 dB, 3.47 dB, and 900 MHz, respectively. In contrast to the conventional technique of verifying operation with a simulated surface current distribution, characteristic mode analysis (CMA) is used to provide a better explanation of the proposed antenna's different modes and the creation of circular polarization. Additionally, the CMA supports the development of an effective technique that can predict whether or not the isolation can be further improved. The simulated results align with the measured results and are well adapted for 5G wireless communication devices.
  PubDate: 2022-02-07
  DOI: 10.1017/S1759078722000113
Light controlled frequency reconfigurable antenna for wireless
applications
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Reji; V., Manimegalai, C. T.
  Pages: 143 - 149
  Abstract: In this paper, a light-controlled frequency reconfigurable antenna is presented for 5 G, WLAN, and radio altimeter applications. The given (44 × 28) mm2 antenna consists of a radiating V-shaped structure and three stub arrangements. The main λ/2 length stub is used to feed the antenna and the two λ/4, λ/8 length open-circuited stubs are located perpendicular to the main feeding stub for tuning the frequency of the antenna. The length of the stubs can be adjusted by placing (4 × 1.2) mm photodiode switches on the perpendicular stubs. Four experiments are carried out to analyze the performance of the antenna. When light and DC bias voltage is not applied (Experiment-1) to the photodiodes the proposed antenna radiates from 4.1 to 4.63 GHz with 12% bandwidth. When light is applied to the photodiode without DC bias voltage and DC bias voltage is applied without light (Experiment-2,3) the antenna reconfigures its frequency band from 3.43 to 3.6GHz and 4.8 to 5.4 GHz with 4.85% and 12% bandwidth respectively. The antenna shifts the radiation from 4.8 to 5.5 GHz with 14% bandwidth when the light and DC bias voltage is applied to the antenna(Experiment-4). The measured gain of the proposed antenna is greater than 3.8dBi in all the experiments.
  PubDate: 2022-02-16
  DOI: 10.1017/S1759078722000137
SIW cavity-backed dual inverted L slot antenna array for Ku band
applications
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kumar; Abhay, Srivastava, Shweta
  Pages: 150 - 155
  Abstract: A novel concept of SIW cavity-backed dual inverted edge curved L slots antenna array with the defective ground plane is proposed in this paper. A linearly placed six-element inverted dual L slots array antenna is designed separated by a distance of 0.55λg to achieve high gain. Each pair of slots is separated by a column of the vias to form sub-cavities and those are fed individually. Defective ground structure (DGS) is introduced at the ground plane to manage the propagation of wave to the last slots in the array. The slots are enclosed by a SIW cavity of height 0.24λg in a single substrate. A measured peak gain of 8 dBi is achieved at 14.29 GHz. The antenna shows a front-to-back ratio of 24.9 dB. The design is also compared with various aspects to show the advantages of each element introduced in the design. The validity of the design is proved by the good agreement between the simulated and measured results. This novel design can be used to achieve the performance requirement of a satellite antenna working in Ku band.
  PubDate: 2022-02-07
  DOI: 10.1017/S1759078722000149
Design, developments, and applications of 5G antennas: a review
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pant; Mohit, Malviya, Leeladhar
  Pages: 156 - 182
  Abstract: As the demand for high data rates is increasing day by day, fifth-generation (5G) becomes the leading-edge technology in wireless communications. The main objectives of the 5G communication system are to enhance the data rates (up to 20 Gbps) and capacity, ultra-low latency (1 ms), high reliability, great flexibility, and enhance device to device communication. The mentioned objectives lead to the hunting of the millimeter-wave frequency range which lies from 30 to 300 GHz for 5G wireless communications. To design such high capacity, low latency, and flexible systems, antenna design is one of the crucial parts. In this paper, a survey is presented on various antenna designs with their fabrication on different types of substrates such as Rogers RT/duroid 5880, Rogers RO4003C, Taconic TLY-5, etc., at different 5G frequency bands. The different configurations of antennas that covered antenna arrays, multiple-input multiple-output (MIMO) antennas, phased antennas, and beamforming antennas are discussed in detail with their applications. The design of MIMO antennas in the 5G frequency band occupied less space so mutual coupling reduction techniques are required for maintaining the required gain, efficiency, and isolation. This paper is also focused on the mutual coupling reduction techniques and diversity in MIMO antennas.
  PubDate: 2022-02-09
  DOI: 10.1017/S1759078722000095