 Subjects -> METALLURGY (Total: 58 journals)
|
|
|
- Assessment of material property variations with resonant ultrasound
spectroscopy (RUS) when using Additive Manufacturing to print over
existing parts
Abstract: Publication date: Available online 17 May 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Hossein Taheri, Fadwa Dababneh, Greg Weaver, Bryan Butsch
- Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): Robert Kupfer, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz, Jan Kalich, Deborah Weiß, Behdad Sadeghian, Matthias Busch, Jan Krüger, Moritz Neuser, Olexandr Grydin, Max Böhnke, Christian-Roman Bielak, Juliane Troschitz
- Effect of tool transverse speed and pin offset on the properties of
friction stir welding Al6061-St52 dissimilar joint
Abstract: Publication date: Available online 10 May 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Mehrshad Alimadadi, Mahdi Mahmoudiniya, Masoud Goodarzi, S.M.A. Boutorabi
- Ultra-rapid and low-temperature soldering of hypereutectic Al-Si alloys by
ultrasonic-assisted soldering with In interlayer in air for electronic
application
Abstract: Publication date: Available online 27 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Yong Nie, Lin Zhu, Qiang Lang, Qian Wang, Peng Yu, Xiaoqiang Hu
- Optimization of Aluminum-to-Steel Friction Stir Lap Welding for the
Fabrication of High-Integrity Structural Components
Abstract: Publication date: Available online 19 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Xiangbin Wang, Diana A. Lados
- Review on mechanical joining by plastic deformation
Abstract: Publication date: Available online 17 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): G. Meschut, M. Merklein, A. Brosius, D. Drummer, L. Fratini, U. Füssel, M. Gude, W. Homberg, P.A.F. Martins, M. Bobbert, M. Lechner, R. Kupfer, B. Gröger, D. Han, J. Kalich, F. Kappe, T. Kleffel, D. Köhler, C.-M. Kuball, J. Popp
- Analysis of Mechanical Properties of Dissimilar Material Joint Using
Scrubbing Refill Friction Stir Spot Welding
Abstract: Publication date: Available online 14 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Naoki Takeoka, Taisuke Tsuchida, Tomoki Matsuda, Tomo Ogura, Ryoji Ohashi, Akio Hirose
- Investigation of the mechanical properties and corrosion behaviour of
hybrid L 80 Type 1 and duplex steel joints produced by magnetically
impelled arc butt welding
Abstract: Publication date: Available online 14 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Thomas Hassel, Hans Jürgen Maier, Alexey Alkhimenko, Artem Davydov, Nikita Shaposhnikov, Gleb Turichin, Olga Klimova
- Selected Properties of RAMOR 500 Steel Welded Joints by Hybrid PTA-MAG
Abstract: Publication date: Available online 7 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Beata Skowrońska, Jacek Szulc, Mariusz Bober, Michał Baranowski, Tomasz Chmielewski
- A review of LTT welding alloys for structural steels: design, application
and results
Abstract: Publication date: Available online 6 April 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Victor Igwemezie, Shamir Muhammad, Ali Mehmanparast, Ganguly Supriyo
- Strength and Failure of Self-Piercing Riveted Aluminum and Steel Sheet
Joints: Multi-axial Experiments and Modeling
Abstract: Publication date: Available online 24 March 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Nikolaos Karathanasopoulos, Dirk Mohr
- Three-dimensional finite element modelling for additive manufacturing of
Ti-6Al-4V components: effect of scanning strategies on temperature history
and residual stress
Abstract: Publication date: Available online 14 March 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Jinbiao Zhou, Richard A. Barrett, Sean B. Leen
- The joint strength of hybrid composite joints reinforced with different
laminates materials
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): F. Ramezani, P.D.P. Nunes, R.J.C. Carbas, E.A.S. Marques, L.F.M. da Silva
- Special Issue: 2nd International Conference on Advanced Joining Processes
2021 (AJP 2021)
Abstract: Publication date: Available online 2 February 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Prof Lucas F. M. da Silva, Prof Paulo Martins, Prof Uwe Reisgen
- EMI shielding leadless package solution for automotive
Abstract: Publication date: Available online 1 February 2022Source: Journal of Advanced Joining ProcessesAuthor(s): ByongJin Kim, HyeongIl Jeon, DaeYoung Park, GiJeong Kim, Nam-Hee Cho, JinYoung Khim
- Systematic adjustment of the joining time in pulsed laser beam welding of
aluminum-copper joints by means of a closed-loop control
Abstract: Publication date: Available online 29 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): M. Seibold, K. Schricker, J.P. Bergmann
- Investigation of the friction weldability of an AlSi10MnMg-alloy
reinforced with 30 Vol.-% silicon carbide particles with the adequate
monolithic material
Abstract: Publication date: Available online 29 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): M. Winkler, C. Gawert, R. Bähr, S. Jüttner, F. Trommer
- Forming process induced material structure of fibre-reinforced
thermoplastics - Experimental and numerical investigation of a
bladder-assisted moulding process
Abstract: Publication date: Available online 19 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Benjamin Gröger, Veit Würfel, Andreas Hornig, Maik Gude
- High-Speed Imaging of Vapor Plume in the treatment of Dissimilar
Aluminum/Titanium Interface with Yb:YAG Laser Pulse
Abstract: Publication date: Available online 14 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Manoj Raja-Kumar, Iryna Tomashchuk, Jean-Marie Jouvard, Mélanie Duband
- Transmission Properties of AuNi Coated Polymer Ball Joint and Sn58Bi
Solder Joint for Flex-on-Board Interconnection
Abstract: Publication date: Available online 14 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Shuye Zhang, Junyong Park, Gapyeol Park, Huijin Song, Joungho Kim, Kyung-Wook Paik, Peng He
- Investigation of the mechanical performance of hybrid bolted-bonded joints
subjected to different ageing conditions: Effect of geometrical parameters
and bolt size
Abstract: Publication date: Available online 14 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): F. Delzendehrooy, A. Akhavan-Safar, A.Q. Barbosa, R.J.C. Carbas, E.A.S. Marques, L.F.M. da Silva
- On weldability of aerospace grade Al-Cu-Li alloy AA2065 by wire-feed Laser
Metal Deposition
Abstract: Publication date: Available online 7 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Siri Marthe Arbo, Stanka Tomovic-Petrovic, Jo Aunemo, Nora Dahle, Ola Jensrud
- Improvement of the resistance spot welding of Al-Mg-Si alloys by using
cladding technology: An optical and mechanical characterization study
Abstract: Publication date: Available online 5 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): P. Bamberg, R. Seewald, A. Schiebahn, U. Reisgen, N. Precoma, M. Epperlein
- Ultrasonic brazing of Zr-based bulk metallic glass and 1060 Al alloy using
Zn-3Al filler metal
Abstract: Publication date: Available online 2 January 2022Source: Journal of Advanced Joining ProcessesAuthor(s): Xingyi Zhang, Dan Li, Ling Wang, Chao Wan, Lizhi Song, Kuijing Song, Yong Xiao
- Influence of classified pore contents on the quasi-static and cyclic
strength properties of the welded joint in gas-shielded metal arc welding
of galvanized, high-strength steels
Abstract: Publication date: Available online 31 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): M. Sarpe, K. Treutler, V. Wesling, P. Dewald, H.C. Schmale
- Microstructure, shear properties and corrosion resistance of Cu/Cu-In/Cu
solder joints
Abstract: Publication date: Available online 31 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): Li Liu, Bo Zhao, Bang Jiang, Zhiwen Chen, Wei Huang, Zhou Luo, Song Du, Chunhua Zhang
- Ultrasonic-assisted soldering of Mg alloy joints using Cu-foam/Sn
composite solder foils
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): Shiqin Li, Yinggan Zhang, Huijun Cao, Xuzhang Zheng, Shuye Zhang, Zhihao Zhang
- Effect of the tool geometry on microstructure and geometrical features of
clinched aluminum
Abstract: Publication date: Available online 25 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): Lars Ewenz, Martin Kuczyk, Martina Zimmermann
- Characterisation of Lateral Offsets in Clinch Points with Computed
Tomography and Transient Dynamic Analysis
Abstract: Publication date: Available online 24 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): D. Köhler, B. Sadeghian, J. Troschitz, R. Kupfer, M. Gude, A. Brosius
- Joining of Continuous Fiber Reinforced Thermoplastic/Steel hybrid parts
via undercutting pin structures and infrared heating
Abstract: Publication date: Available online 23 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): Julian Popp, Dietmar Drummer
- Effect of Thermally Expandable Particle Additives on the Mechanical and
Reversibility Performance of Adhesive Joints
Abstract: Publication date: Available online 22 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): Giulio Piazza, Matthew Burczyk, Marco Gerini-Romagnoli, Giovanni Belingardi, Sayed A. Nassar
- Deep Learning approaches for force feedback based void defect detection in
Friction Stir welding
Abstract: Publication date: Available online 18 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): P. Rabe, A. Schiebahn, U. Reisgen
- Quality prediction of disturbed ultrasonic metal welds
Abstract: Publication date: Available online 11 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): F.W. Müller, A. Schiebahn, U. Reisgen
- Introducing a 3D-SiO2-fiber interlayer for brazing SiC with TC4
by AgCuTi
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): Q. Ma, J. Pu, S.G. Li, Y.W. Chen, P. He
- Shear performance and accelerated reliability of solder interconnects for
fan-out wafer-level package
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): Shuye Zhang, Ran Duan, Sunwu Xu, Panfei Xue, Chengqian Wang, Jieshi Chen, Kyung-Wook Paik, Peng He
- Methods for improving joint strength of friction stud welded AA5083 alloy
joints
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): M. Kimura, Y. Sano, M. Kusaka, K. Kaizu
- Simulation of transient heat transfer and phase transformation in laser
beam welding for low alloy steel and studying its influences on the
welding residual stresses
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): K.R. Krishna Murthy, F. Akyel, U. Reisgen, S. Olschok
- Effect of temperature and loading rate on the mode I fracture energy of
structural acrylic adhesives
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): Asuka Hayashi, Yu Sekiguchi, Chiaki Sato
- Laser-induction welding of nodular grey cast iron using oscillating beam
guidance-microstructural and mechanical characterization
Abstract: Publication date: June 2022Source: Journal of Advanced Joining Processes, Volume 5Author(s): N. Sommer, S. Böhm
- Laser micro welding with fiber lasers for battery and fuel cell based
electromobility
Abstract: Publication date: Available online 9 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): E Haddad, W.S. Chung, O. Katz, J. Helm, A. Olowinsky, A. Gillner
- Fiber response to pin penetration in dry woven fabric using numerical
analysis
Abstract: Publication date: Available online 4 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): M. Droß, P. Heyser, G. Meschut, A. Hürkamp, K. Dröder
- Adjustment of chemical composition with dissimilar filler wire in 1.4301
austenitic stainless steel to influence residual stress in laser beam
welds
Abstract: Publication date: Available online 3 December 2021Source: Journal of Advanced Joining ProcessesAuthor(s): F. Akyel, M. Gamerdinger, S. Olschok, U. Reisgen, A. Schwedt, J. Mayer
- Effect of Cu content on properties of Cu/Zn+15%SAC0307+xCu/Al joint by
ultrasonic excitation at low temperature
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Qianzhu Xu, Guisheng Gan, Zhaoqi Jiang, Shiqi Chen, Tian Huang, Cong Liu, Peng Ma, Dayong Cheng, Yiping Wu
- Investigation of deposition strategy on wire and arc additive
manufacturing of aluminium components
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Matthieu Rauch, Uzoma Vincent Nwankpa, Jean-Yves Hascoet
- Part I.: Friction stir welding of equiatomic nickel titanium shape memory
alloy – microstructure, mechanical and corrosion behavior
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Parker West, Vasanth C. Shunmugasamy, Chaudhry A. Usman, Ibrahim Karaman, Bilal Mansoor
- Part II.: Dissimilar friction stir welding of nickel titanium shape memory
alloy to stainless steel – microstructure, mechanical and corrosion
behavior
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Parker West, Vasanth C. Shunmugasamy, Chaudhry A. Usman, Ibrahim Karaman, Bilal Mansoor
- Development of a novel electroless deposited nickel braze for
micro-tubular solid oxide fuel cell current collector contacting
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): O. Hodjati-Pugh, A. Dhir, R. Steinberger-Wilckens
- Suppression of liquation cracking susceptibility via pre-weld heat
treatment for manufacturing of CM247LC superalloy turbine blade welds
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Eun-Joon Chun, Ye-Seon Jeong, Kyeong-Min Kim, Hyungsoo Lee, Seong-Moon Seo
- Control of surface micro−structure for Al alloy/polymer joining
fabricated by laser process using Al−Ti−C powders: Effect of powder
composition.
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Seung−Gwang Kim, Asuka Suzuki, Naoki Takata, Makoto Kobashi
- Prediction of reversible α/γ phase transformation in multi-pass weld of
Fe-Cr-Ni ternary alloy by phase-field method
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Dong–Cho Kim, Tomo Ogura, Ryosuke Hamada, Shotaro Yamashita, Kazuyoshi Saida
- Modelling of the temperature distribution of spot-weldable composite/metal
joints
Abstract: Publication date: November 2021Source: Journal of Advanced Joining Processes, Volume 4Author(s): Sven Roth, Jonas Nieschlag, Malte Mehner, Sven Coutandin, Jürgen Fleischer
|
Open Access journal
