 Subjects -> AERONAUTICS AND SPACE FLIGHT (Total: 124 journals)
| A B C D E F G H I J K L M N O P Q R S T U V W X Y Z | | The end of the list has been reached or no journals were found for your choice. |
|
|
- Guest editor biography
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Pages: 209 - 209
Abstract: International Journal of Aeroacoustics, Volume 22, Issue 3-4, Page 209-209, June 2023.
Citation: International Journal of Aeroacoustics
PubDate: 2023-07-10T04:02:24Z
DOI: 10.1177/1475472X231183612
Issue No: Vol. 22, No. 3-4 (2023)
- Trailing edge serrations for noise control in axial-flow automotive
cooling fans-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Kwang Ho Hur, Basharat Ali Haider, Chang Hyun Sohn
Abstract: International Journal of Aeroacoustics, Ahead of Print.
This study investigated the use of trailing edge serrations to reduce the noise generated by axial-flow automotive cooling fans. Three different serration profiles (sinusoidal, rectangular, and triangular) were examined, with the profiles being extended radially along the entire blade length and truncated at half the blade length while keeping the dimensionless wave number k∗ and wave amplitude 2h∗ constant. The simulations employed a hybrid URANS-LES solver for the flow field and Ffowcs Williams-Hawkings analogy for the sound field, corresponding to the maximum volumetric flow rate and fan rotational speed. Acoustic pressure measurements were taken at multiple receivers upstream and downstream of the fan, and the overall sound pressure level was computed based on the results. Furthermore, the study also compared the aerodynamic performance of all serration types with the baseline fan, revealing that the baseline fan was relatively more efficient than their serrated counterparts. Despite the reduced efficiency, the trailing edge serrations offered significant noise reduction benefits of up to 10 dB, making them a promising solution for improving acoustic comfort in automotive cooling systems.
Citation: International Journal of Aeroacoustics
PubDate: 2023-10-14T01:33:23Z
DOI: 10.1177/1475472X231206498
- Acoustic characteristics of jets impinging on permeable plates
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Abhijit Dhamanekar, K Srinivasan
Abstract: International Journal of Aeroacoustics, Ahead of Print.
This article explores the acoustic characteristics and the relevant flow features of jets impinging on permeable plates. Noise generated due to the interaction of the jet with permeable plates is compared with jets impinging on an impermeable plate and the corresponding free jet. This study systematically measures various parameters, including pore size, porosity, and pressure drop, to precisely quantify the permeability of the plates using the Forchheimer equation. The focus is on investigating the impact of permeability on noise reduction. An acoustic study is performed by carrying out blow-up and blow-down tests to find the effect of permeability at different nozzle pressure ratios and different nozzle-plate spacings. An extensive directivity study is conducted to find the directionality of acoustic emissions and calculate acoustic power. It is found that the overall sound pressure level is lower for the jets impinging on the permeable plates compared to the impermeable plates in subsonic cases. It is also observed that the insertion of the permeable plates in supersonic jets generates less noise compared to the corresponding free jet. It is found that most of the tones are absent in the case of permeable plates for supersonic jets, whereas the tones are present with lesser amplitude compared to jets impinging on impermeable plates for subsonic and transonic jets. Finally, flow measurement and flow visualization studies are carried out to understand the flow physics responsible for the noise variance. This study illuminates that the passage of flow through the porous plate results in the reduction of wall-jet velocities, thereby suppressing the turbulent mixing noise. The absence of shock oscillations in front of the permeable plate is identified as the cause of the mitigation of impinging tones.
Citation: International Journal of Aeroacoustics
PubDate: 2023-10-11T03:39:01Z
DOI: 10.1177/1475472X231206496
- Influence of nozzle external geometry on the emission of screech tones
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: David Morata, Dimitri Papamoschou
Abstract: International Journal of Aeroacoustics, Ahead of Print.
The effect of external nozzle geometry on the emission of screech tones was studied experimentally. Four conical reflector surfaces, with half-angles ranging from 60° to 90°, were installed around the exit of a round convergent nozzle. The investigation focused on two closely spaced fully-expanded Mach numbers, Mj = 1.32 and 1.34. The acoustic far-field was surveyed by a microphone phased array that included a continuously-scanning microphone, the latter enabling high spatial resolution. The isolated jets contained well-known screech mode B and its harmonics. Addition of the reflectors caused significant changes in the modal emission pattern, with tones traditionally linked to mode C occurring at Mj = 1.34 but not at Mj = 1.32. Tonal components associated with new modes E and F emerge at both Mach numbers when the cone half-angle is 60° or 70°. The noise source distribution generally elongates with decreasing cone angle. Some modes show clear scattering from the reflectors, while others do not. The study underscores the complexity that initial conditions can impart on the modal structure of screech and demonstrates the capability of the continuous-scan beamforming technique in resolving fine features of the source.
Citation: International Journal of Aeroacoustics
PubDate: 2023-10-05T08:39:40Z
DOI: 10.1177/1475472X231199185
- Machine learning methods for multi-rotor UAV structural damage detection
based on MEMS sensor-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yumeng Ma, Faizal Mustapha, Mohamad Ridzwan Ishak, Sharafiz Abdul Rahim, Mazli Mustapha
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Multi-rotor Unmanned Aerial Vehicles (UAVs) have become increasingly important in industries and early detection of structural damage is crucial to prevent unexpected breakdowns, ensure production efficiency, and maintain operational safety. This paper proposes machine learning techniques for detecting damage caused by loosened screws which is not easy founded based on vibration signals. An independent data acquisition device with a Micro Electro Mechanical Systems (MEMS) sensor is designed and fixed onto the multi-rotor UAVs to acquire the vibration data. Four machine learning algorithms, namely Support Vector Machine (SVM), K-Nearest Neighbor (KNN), Decision Tree, and Random Forest, are employed for damage detection. The results demonstrate successful utilization of the vibration data from the MEMS sensor for damage detection, with the random forest model outperforming other models with an accuracy of 90.07.
Citation: International Journal of Aeroacoustics
PubDate: 2023-10-05T03:12:24Z
DOI: 10.1177/1475472X231206495
- Analysis of vortex structures evolution and aeroacoustic characteristics
in the ultra-high-speed elevator ring-gap flow field-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Qing Zhang, Chaoyue Li, Ruijun Zhang, Yulei Wang
Abstract: International Journal of Aeroacoustics, Ahead of Print.
The continuous improvement of elevator speed has made the issue of aerodynamic noise in the hoistway more prominent. Previous research has usually focused on the characteristics of aerodynamic loads and related safety issues, and little attention has been paid to the problem of flow-induced noise. This paper established a three-dimensional geometric configuration of the ultra-high-speed elevator to study the flow behavior and aerodynamic acoustic characteristics in the hoistway using well-validated large eddy simulations. Firstly, we analyzed the unsteady flow behavior in the ring-gap flow field using large eddy simulations and captured the transient vortex structure in the flow field using the Q-criterion. We then predicted the far-field aerodynamic noise of the elevator car using the Lighthill-Curle aerodynamic acoustic equations. The results showed that the factors affecting the sound source intensity of the elevator car include the shedding position and intensity of the vortex structures. By adjusting the shedding position and reducing the intensity of the vortex structure, the sound source intensity of the elevator car wall could be effectively controlled. The change of the blocking ratio could not affect the attenuation of aerodynamic noise in the hoistway, but the increase of the blocking ratio could lead to an increase in the turbulent kinetic energy intensity and peak SPL in the hoistway. Therefore, the blocking ratio should be kept within 0.65 when designing the hoistway structure dimensions.
Citation: International Journal of Aeroacoustics
PubDate: 2023-10-05T02:51:34Z
DOI: 10.1177/1475472X231206892
- Modeling, design, and optimization of a dielectric elastomer acoustic
liner-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chelsea Solano, Louis Cattafesta
Abstract: International Journal of Aeroacoustics, Ahead of Print.
The modeling, design, and optimization of an embedded dielectric elastomer (DE) membrane acoustic liner is considered. The acoustic impedance of the liner is modified when the DE is subjected to voltage, resulting in a reduction of the in-plane stress. A lumped element model of an embedded dielectric elastomer acoustic liner is derived and validated in a normal incidence impedance tube and is subsequently used to optimize its performance. The optimization cost functions include (1) maximization of the average absorption coefficient over a targeted frequency range, 400 – 1600 Hz and (2) maximization of the change in the liner fundamental resonance frequency when the membrane is activated. Good agreement between measured and predicted absorption is observed. Tuning of the resonant frequency requires a numerical solution for resonance using the imaginary part of the impedance, since a simple analytical expression for resonance cannot be derived due to the complex coupling between the acoustics of the liner and the electro-mechanics of the DE membrane. Nonetheless, resonant frequency shifts predicted with the lumped element model compare favorably to those measured with the activated liner sample, with a shift of 213 Hz.
Citation: International Journal of Aeroacoustics
PubDate: 2023-10-03T01:38:57Z
DOI: 10.1177/1475472X231199187
- The space-time structure of sound produced by stacked rotors in hover
using Vold-Kalman filters and proper orthogonal decomposition-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Charles E Tinney, Yingjun Zhao-Dubuc, John Valdez
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Proper orthogonal decomposition and the Vold-Kalman order tracking filter are combined to evaluate the most energetic components of the sound field produced by a coaxial, co-rotating rotor in hover. The study leverages the database generated by Tinney and Valdez (2020; AIAA J. vol. 58, no. 4) comprising an array of eight stationary microphones oriented to capture the acoustic near-field below the rotor disk plane where ground observers are expected to reside and where concerns over community annoyance are greatest. Changes to rotor conditions focus primarily on rotor speed and index angle (angular separation between the upper and lower rotors), as this has the greatest effect on the sound field produced by stacked rotors by way of the constructive and destructive interference of the sound generated, separately, by the upper and lower rotors. Proper orthogonal decomposition is performed using a kernel constructed from auto and cross-spectral densities of the spatially coherent sound field. The eigenvectors demonstrate the spatial extent of the sound field for discrete frequencies corresponding to the first few blade pass frequency harmonics. In order to improve the clarity and accuracy of the low-order reconstructions, a second generation, Vold-Kalman multi-order tracking filter is employed to isolate discrete frequencies. Relative to conventional spectral filtering methods, the Vold-Kalman filter is performed in the time-domain and is shown to accurately isolate discrete tones while preserving changes to the phase of the signal. Findings from this analysis reveal the effect of index angle on the spatial make-up of the coherent sound field produced by hovering stacked rotors.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-30T12:16:25Z
DOI: 10.1177/1475472X231199186
- Phased array microphone measurement of a ducted low-speed axial flow fan
at various operating points with the involvement of the acoustically
transparent duct technique-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Bálint Lendvai, Tamás Benedek
Abstract: International Journal of Aeroacoustics, Ahead of Print.
The aeroacoustic investigation of ducted turbomachines is not evident. Wall-mounted and strut-mounted microphones placed in the flow field are both sensitive to installation, placement, and flow-related effects. Therefore, it is advantageous to place the microphone sensors outside of the ducting of the turbomachine while also accounting for the acoustic characteristic of the ducting. In this paper, a ducted low-speed axial flow fan is investigated with the acoustically transparent duct (ATD) and the phased array microphone (PAM) Rotating Source Identification (ROSI) beamforming techniques at design and off-design conditions. The combination of these methods is capable of identifying the dominant sound sources of the fan in a non-intrusive approach at stall condition, pre-stall operation, design condition, and part-load operating condition as well.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-30T07:54:24Z
DOI: 10.1177/1475472X231206494
- Investigation of the effects of volume change on flow structure and
acoustic in a silencer-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ezedin Ayaliew Yimam, Tolga Demircan
Abstract: International Journal of Aeroacoustics, Ahead of Print.
This study numerically examined the propellant flow from gunfire using the kω-SST turbulence model and their sound attenuation using the Ffowcs-Williams and Hawkins equations (FW-H). For simulation, a pressure-based solver and 3D axisymmetric geometry were used. The second-order implicit time approach and the second-order upwind scheme spatial discretization were used in the simulation. The maximum exit pressure was 3.748 MPa for the suppressor with a length of 70 mm and diameter of 20 mm. However, when the diameter suppressor increased by 1/6, the maximum exit pressure was reduced to 3.4961 MPa. When the length increased by 1/6, the maximum pressure became 3.3636 MPa. Lastly, when the diameter and length were increased by 1/6, the maximum exit pressure became 3.177 MPa. For this suppressor, 20.835 dB (12.29%) sound pressure level attenuation was achieved with 16.823 MPa (84.115%) overpressure reduction and 484.86 K or 32.32% temperature reduction. Generally, the attenuation increased with the increase in the suppressor’s internal volume.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-30T05:24:41Z
DOI: 10.1177/1475472X231206497
- Is an elliptic jet quieter than a round jet'
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: K. Viswanathan
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Non-axisymmetric geometries, mainly elliptic and rectangular, have been proposed for the reduction of jet noise vis-à-vis round nozzles. Most of the studies of these nozzles are from unheated jets and are restricted to nozzles of very small size. Furthermore, all of them have been carried out at static conditions, thereby rendering their value to insignificance for practical applications. All engines in service with long ducts and a confluent nozzle incorporate an internal lobed mixer. The aeroacoustic characteristics of an elliptic compound nozzle that represents the geometry of an existing low bypass ratio (BPR) turbofan engine, is investigated at 1/7th scale in this study. Typical engine cycle conditions are chosen; data are acquired statically and in the presence of a flight stream. The aspect ratio of the nozzle is 2.0; higher aspect ratios are not suitable for engine applications. The results are compared with a round compound nozzle with the same internal geometry, so as to assess the acoustic benefit, if any, of the elliptic nozzle. Both a simple internal splitter and an in-service lobed mixer have been considered. The elliptic nozzle introduces azimuthal asymmetry even for an unheated jet; the magnitude of azimuthal variation becomes pronounced for heated jets. Typically, the lowest level of noise is observed towards the narrow side of the elliptic nozzle (ϕ = 0°); the noise level gradually increases and reaches a maximum towards the broader side (ϕ = 90°). Though there are some superficial similarities between the elliptic and beveled nozzles, it is shown that the noise characteristics are very different. A systematic study is carried out, with step-by-step build up to realistic geometry, with forward flight. A large noise reduction of ∼3 to ∼4 EPNdB is observed for the splitter nozzle under static conditions. The introduction of a realistic lobed mixer reduces this benefit to close to zero. Finally, there is a noise increase at all azimuthal angles with forward flight. Therefore, the elliptic nozzle does not provide any EPNL benefit for actual nozzle geometry and consequently does not constitute a viable design for noise reduction. The importance of evaluating noise reduction concepts using appropriate geometry and under realistic forward flight conditions is emphasized once again.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-30T01:14:22Z
DOI: 10.1177/1475472X231206889
- A study of the phenomenon of “crackle” associated with the noise of
high-performance aircraft at afterburner-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Christopher KW Tam, John T Spyropoulos, Allan C Aubert, Russell W Powers
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Ffowcs Williams et al were the first to discover crackle in the noise of the Concorde when the Olympus 593 engine which propelled Concorde was operating at afterburner power. Ffowcs Williams et al described crackle as a transient phenomenon. The primary objective of the present investigation is to show that the noise of F-18E aircraft has crackle. The fundamental elements in the noise of a crackling jet described by Ffowcs Williams et al are sawtooth-like pulses, bursts and trains of bursts. All these characteristic features of pressure pulses are identified in the noise of F-18E aircraft. By including a minimum pulse amplitude requirement based on the level found in the noise of the Concorde by Ffowcs Williams et al, a set of sufficiency conditions for the presence of crackle is established. It is found that crackle exists in the noise of an F-18E aircraft over a fairly large angular sector in the downstream direction. In the literature, the existence of sawtooth-like sound pulses in a noise field is often taken as an indicator of the presence of crackle. The importance of pressure pulse waveform on its impact on human hearing is briefly investigated by using a simple mechanical model of the ear.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-25T04:25:31Z
DOI: 10.1177/1475472X231199182
- Acoustic sources identified using a microphone phased array during a
rocket engine test-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Jayanta Panda, Evan D Crowe, Lester A Langford, Earl T Daley, Kenneth R Hamm, Joel W Sills
Abstract: International Journal of Aeroacoustics, Ahead of Print.
A new phased array of microphones, suitable for the harsh environment of a rocket launch, was built and tested during a static firing of an RS-25 engine. It uses 70 piezo-resistive, dynamic pressure sensors, optimally distributed on a 10.5-ft diameter open frame dome structure and has a 200-ft long cable bundle to carry the signals to a weather-protected cabinet containing the data systems. The test stand was imaged using an infra-red camera and a visible wavelength camera, and the beamformed noise maps were superimposed on the photographs. The first-time data from a full-scale engine test stand showed that the plume deflector at the bottom of the engine was the primary noise source. The openings of the test stand around the nozzle exit were also found to be noise sources particularly at higher frequencies. The final goal is to utilize the array during NASA’s Artemis-II launch at Kennedy Space Center.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-15T12:00:17Z
DOI: 10.1177/1475472X231199183
- Reynolds number and jet noise scaling
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Aharon Z. Karon, Krishan K. Ahuja
Abstract: International Journal of Aeroacoustics, Ahead of Print.
The Reynolds number and Mach number are classical quantities used to determine the similarity of aerodynamic flows. Existing studies on the role of Reynolds Number on jet noise show inconsistent results, casting doubt on how small a nozzle diameter can be for the classical jet noise scaling laws to hold. A systematic study was therefore undertaken to resolve this issue. The Reynolds number of jet flows was adjusted using a Mach number variation between 0.4 and 0.8, and nozzle-exit diameters of 0.25, 0.5, and two inches. When the jet noise measurements were normalized, spectral collapse was observed for the spectra across the whole Reynolds number range. It was found that the Reynolds number does not have a significant effect on jet noise, and jet noise can be scaled from even the smallest of nozzle to larger nozzles.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-07T05:12:29Z
DOI: 10.1177/1475472X231199188
- Flow and acoustics in a model rocket flame deflector and deflector cover
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Evren Yenigelen, Philip J Morris
Abstract: International Journal of Aeroacoustics, Ahead of Print.
The design of a rocket launch environment is a complex process with many different aspects that are highly interconnected. Acoustics, which is one of these, should be investigated in detail due to possible devastating effects on the launch vehicle, crew, and launch environment. This study uses a numerical method to consider a passive noise reduction method applied to a supersonic jet impinging on an inclined flame deflector to decrease the acoustic loads on the launch vehicle and noise levels in the far-field. In a supersonic jet impinging on an inclined flat plate configuration, acoustic waves that travel upstream originate from the impingement and wall jet regions. These upstream traveling waves are a combination of the acoustic waves that are produced by the high speed jet flows in the wall jet region and acoustic waves that reflect from the impingement wall. Due to the inclination of the impingement plate, these waves either travel to the far-field in the upstream direction or travel towards the free-jet region interacting with the high speed flow near the nozzle lip. This interaction can create a self sustaining feedback loop, which can cause acoustic tones to appear in the near- and far-field spectra. It is the aim of the present study to block the upstream traveling waves by introducing a second inclined wall with a circular cut-out between the nozzle exit and the impingement plate. Different configurations with different wall locations and cut-out sizes are investigated using a Detached Eddy Simulation CFD solver and an acoustic solver that is based on the Ffowcs Williams and Hawkings analogy. The mechanisms for the establishment of the feedback loops are examined.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-06T11:09:59Z
DOI: 10.1177/1475472X231199184
- Initial boundary layer state of typical model-scale jet nozzles and its
impact on noise-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: KBMQ Zaman
Abstract: International Journal of Aeroacoustics, Ahead of Print.
A set of 2-inch diameter nozzles is used to investigate the effect of varying exit boundary layer (BL) states on the radiated noise from high-subsonic jets. It is confirmed that nozzles involving turbulent boundary layers are the quietest while others, involving nominally-laminar BLs, are noisier. A turbulent BL is thicker and there is simply an effect of thickness on noise. A thicker BL results in a decrease in the sound pressure spectral amplitudes due to a less vigorous growth of instability waves in the jet’s shear layer. A nominally-laminar BL, besides being thinner, may also involve significantly higher turbulence intensities, much higher than that in a turbulent BL. Such a BL state, referred to as ‘highly disturbed laminar’, results in the largest noise amplitudes especially on the high-frequency side of the spectrum. This transitional state, often encountered with model scale nozzles, involves a ‘Blasius-like’ mean velocity profile but large velocity fluctuation intensities and intermittency. The higher initial turbulence adds to the increase in high-frequency noise. The results leave little doubt that an anomaly noted with subsonic jet noise databases in the literature is due to similar effects of differences in the initial boundary layer state.
Citation: International Journal of Aeroacoustics
PubDate: 2023-09-01T08:45:35Z
DOI: 10.1177/1475472X231199189
- Beamforming with modified steering vectors for jet noise source location
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Robert P Dougherty
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Prof. Krish Ahuja has a longstanding interest in jet noise source location. His work in this area is grounded in the idea that if the assumed source location is correct, then the sound should obey the inverse square law relative to that point and the phase should be constant along lines originating at that point. He applied this with, conceptually, one microphone in 1985 and two microphones in 1998. In 2006 he commissioned a beamforming system, Array 48, from OptiNav, Inc. His student, Nick Breen, used this to measure subsonic jet noise source location in detail. The NASA-Glenn Research Center also purchased an Array 48. In the current work, a jet noise data set measured by Gary Podboy using Glenn’s array in 2008 is revisited with a new beamforming algorithm, Robust Functional Beamforming, to further support Tam’s two-source model and Breen’s source location. Beamforming with modified steering vectors is performed to measure the parameters of the wavepacket source model from the far field. This process suggested replacing the wavepacket spatial length parameter with a temporal lifetime parameter. Another steering vector modification aimed to measure modes with odd spinning order. It seems to have found them at an apparent location 10 jet diameters removed from the jet, laterally. This is tentatively interpreted as a Mach radius phenomenon like one observed by Csaba Horvath at NASA-Glenn, also using Array 48, to study counter-rotating propeller noise. In an observation unrelated to beamforming, the excess noise measured at 40° from the jet axis as compared with the 90° angle, is fully contained in the first few cross spectral matrix eigenvalues, or Spectral Proper Orthogonal Decomposition modes, in some cases.
Citation: International Journal of Aeroacoustics
PubDate: 2023-08-26T02:24:26Z
DOI: 10.1177/1475472X231199190
- Numerical study of acoustic source localization of rotor using a novel
discrete noise analysis strategy-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Weicheng Bao, Xi Chen, Qijun Zhao, Dazhi Sun
Abstract: International Journal of Aeroacoustics, Ahead of Print.
In order to obtain the influence mechanism of the rotor noise and the local aerodynamic variation under different operating conditions, a novel discrete noise analysis strategy for the acoustic source localization is established. The analysis strategy has two aspects including the blade division method and the noise contribution calculation method. Firstly, the body-fitted rotor blade grids are preprocessed and refined at the division position before the flowfield simulation. Then, based on the flowfield result, the blade grids are divided into several blocks in the chordwise and spanwise directions, and the acoustic pressure of each block is predicted. Finally, a discriminant function for the contribution of the block to the rotor noise is proposed, and the acoustic source localization is carried out. The URANS equations and FW-H equations are used to capture high-fidelity flowfield and rotor acoustic pressure. Parameters such as the block position in different direction on the rotor blade and the collective pitches are quantified, and the relationship between air flow and aeroacoustics is discussed in detail. Some conclusions are obtained by analyzing the BO105 model rotor in hover. The acoustic pressure produced by the leading edge of the upper surface could cancel about 50% acoustic pressure of the remainder of these blocks. Increasing the force at this position will be benefit to the noise reduction. Acoustic source distribution is closely linked to the flow separation near the blade tip: the main acoustic source moves toward around 0.9 R section of the blade in the spanwise direction, and it moves from the leading edge towards the trailing edge in the chordwise direction.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-22T11:46:27Z
DOI: 10.1177/1475472X231185068
- Examination of air flow characteristics over an open rectangular cavity
between the plates-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ilker Goktepeli, Ulas Atmaca
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Air flow characteristics of an open cavity have been numerically examined by using different turbulence models of Detached Eddy Simulation (DES), k-ε Realizable, k-ω Shear Stress Transport (SST) and Large Eddy Simulation (LES) based on an experimental study of open literature. Numerical results of transient analyses have been compared to experimental results at cavity length-based Reynolds number of Re = 4600. Pressure distributions, streamline patterns, streamwise velocity components, mean velocity values and their vectors have been given in terms of contour graphics. Moreover, velocity profiles have been presented. Pressure fluctuations have been triggered by flow separation and its reattachment. Due to upstream separation of boundary layer, there was curved boundary layer obtained between the outer potential-flow-like and the recirculation zones. As a result, negative velocity values are evidence for rotational flows affected by formation of secondary flows in the cavity. Furthermore, lower pressure region has been observed as a result of rotational flow which was powerful in the open cavity. Numerical results of DES and LES turbulence models are in good agreement with the results of reference study. As the numerical results obtained by LES turbulence model are approximately same with those of experimental reference study, LES turbulence model is mostly recommended. As an option to these turbulence models, k-ω SST model could be utilized for limited computer capacity. However, k-ε Realizable model is not sufficient for capturing rotational flows which are very effective in terms of present case.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-21T03:27:02Z
DOI: 10.1177/1475472X231185082
- Numerical simulation on the acoustic wave scattering and fluid
perturbations inside confined orifice flow-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wenyu Chen, Peng Wang, Yingzheng Liu
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Acoustic wave scattering and fluid perturbations produced by interactions between incident acoustic wave and confined orifice flow were investigated by a combined numerical solution containing nonlinear flow simulation and linearized acoustic simulation. In flow simulations, the mainstream Reynolds number was fixed at 10,000, which relates to the cooling pipe system of lithography. Turbulent flow fields corresponding to different orifice geometries were solved by an opensource finite volume solver OpenFOAM with Reynolds-averaged Navier–Stokes turbulence model. The turbulence database could efficiently improve the accuracy of subsequent linearized acoustic simulations as the viscosity dissipations were considered. In acoustic simulations, the linearized Navier-Stokes equations were solved by a finite element solver with transformation into frequency domain. The incident acoustic waves with varying frequencies from 500 Hz to 4000 Hz were arranged first at the inlet and then the outlet surfaces, enabling a two-port analysis on the transmission and reflection coefficients of acoustic waves. The numerical setup and the two-port model were well validated by results in literature. Generally, acoustic waves tend to gradually dissipate as their frequencies increase or the opening ratio of the ducted orifice decreases. However, the nonlinear variation in the transmission and reflection coefficients against the frequency variation of the incident acoustic waves could be investigated by increasing the thickness ratio. The acoustically induced fluid perturbations that were characterized by the Q-criterion could form a ring shape vortex structure in the vicinity of the orifice edge and then develop into disk-like packets. When the circumferential shape of the orifice was changed to a square, the attenuation of the incident acoustic waves corresponded to the intensity of the three-dimensionality of the acoustic-induced vortex structures, which indicated a greater energy transfer from the acoustic waves to the fluid perturbations.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-15T01:13:44Z
DOI: 10.1177/1475472X231183155
- Impedance models for single and two degree of freedom linings with an
improved data base and local non-linearity-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Walter Eversman, Mary Drouin
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Previously developed predictive models for impedance of single-degree-of-freedom and two-degree-of-freedom acoustic linings driven by a broad band acoustic source are reexamined. Two issues are addressed, the first being improvement of the conventional perforate face sheet impedance model. Data correlations based on flow bench measurements of steady flow pressure drop are reevaluated with emphasis on low flow velocity to improve the consistency of the prediction of linear resistance. In addition, for two-degree-of-freedom linings, face sheet mass reactance is modified to account for the presence of the septum. The second issue addresses the implication that for a non-linear lining, with impedance a function of the local sound pressure level, the installed performance of the lining depends on the local impedance, as opposed to impedance based on the source sound pressure level. This is investigated in the benchmarking of the impedance models by comparison of the acoustic transfer function predicted by a propagation code with the imbedded impedance model and transfer function measurements made in a grazing flow duct test facility. The propagation code is extended to make the non-linear behavior of the lining model dependent on the local acoustic spectrum, introducing an additional level of non-linearity and an iterative application of the propagation code. A principal conclusion is that with no grazing flow both the lining model and grazing flow duct transfer function measurements show a significant effect of local variation of the acoustic spectrum. With increasing grazing flow Mach number, this effect is reduced and effectively disappears at the highest Mach number. With increasing grazing flow Mach number the grazing flow contribution to face sheet resistance dominates and tends to mask the non-linear behavior of the component of resistance not related to grazing flow.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-14T02:50:46Z
DOI: 10.1177/1475472X231183153
- Acoustic wave radiation from a coaxial pipe with partial lining and inner
perforated screen-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ayse Tiryakioglu, Burhan Tiryakioglu
Abstract: International Journal of Aeroacoustics, Ahead of Print.
In this study, the analysis of sound waves from a coaxial pipe with a perforated screen and a partial acoustic absorbing lining is investigated. The geometry under consideration consists of an infinite pipe placed in a semi-infinite cylindrical pipe such that the inner surface of the outer pipe is covered with a partial acoustic absorbing lining. Because of the partial lining, the solution is obtained with both the Jones’ method and the Mode-Matching method. The effects of the problem parameters such as perforated screen and partial lining on the radiation phenomenon are presented.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-12T10:28:26Z
DOI: 10.1177/1475472X231183152
- Effect of geometrical parameters and additional mass on the acoustic and
vibration control of the bilayer resonant metamaterials-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Bingfei Liu, Yangjie Hao, Ping Chen
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Due to the advantages of lightweight, small size, high stiffness, and adjustable parameters, plate metamaterials have shown great practical application value in the field of acoustic vibration control in engineering. For low-frequency vibration and noise control, an annular slotted bilayer plate metamaterial is designed, which can realize sound insulation and vibration reduction at 100–150 Hz (low-frequency range). By changing the geometric parameters of the annular slotted bilayer plate, the structural parameters of the additional mass, the material parameters, and its distribution position, the acting frequency band is reduced and the band gap of sound insulation and vibration reduction is widened. The integral metamaterial panels of circular and square PA12 were fabricated by 3D printing technology, and then, the acoustic and vibration characteristics were tested in the ZK1030 impedance tube system and Polytec full-field scanning laser vibration measurement system, respectively. The results show that the structure has the best performance by varying the resonant ring thickness of the lattice structure, controlling the wave incidence angle to 0°, and pointing force excitation in the X direction. However, when the mass of the additional mass block is certain, the distribution position of the mass block has less effect. The experimental result was reasonably consistent with the simulation analysis result. This work can provide a reference for the design of bilayer plate acoustic metamaterials with low-frequency broadband acoustic insulation and low-damping vibration based on periodic structures in engineering.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-10T01:24:21Z
DOI: 10.1177/1475472X231183158
- Research on the influence of check valve on noise performance of variable
frequency scroll refrigeration compressor-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wenzhuo Zhang, Bingqian Li, Weiguo Yan, Zhen Wang, Xiaoqian Yang, Hongkun Li, Jianguo Chen, Jin Xu
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Check valve is one of the core components of the scroll refrigeration compressor, which can directly affect its efficiency, life, and noise performance. Traditional check valve is the reed valve. This paper deeply studies the dynamic characteristics of reed valve and reveals the main reason of the valve noise under different rotation speeds. The large noise is mainly attributing to the large pressure pulsation as well as fast circulation velocity of fluid and the severe slapping of the reed plate on the valve seat, which is influenced by the high pressure ratio of the working condition and stiffness of the reed valve. In order to reduce the noise of the check valve, the circular valve is designed to replace reed valve in this paper. At each rotation speed, the circular valve shows a continuous exhaust process, which avoids the slapping of the valve plate on the valve seat. More importantly, the exhaust is smooth and the pressure pulsation as well as the flow rate of the fluid is reduced significantly leading to the low aerodynamic noise. Therefore, compared with the reed valve compressor, the sound pressure level of the circular valve compressor at 1800, 4200, and 6600 rpm is decreased by 3.0, 5.2, and 0.3 dB, respectively.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-10T01:16:21Z
DOI: 10.1177/1475472X231183157
- Experimental noise reduction (aeroacoustical enhancement) of a large
diameter axial flow cooling fan through a reduction in blade tip clearance
-
Free pre-print version: Loading...
Rate this result:
What is this?
Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Pieter Coenraad Swanepoel, Till M Biedermann, Sybrand J van der Spuy
Abstract: International Journal of Aeroacoustics, Ahead of Print.
Aerodynamic and aeroacoustic performance experiments were carried out on four- and eight bladed, 1.542 m diameter, axial flow cooling fans, with constant solidity and hub-to-tip ratio. Tests were conducted in an ISO5801, Type A Fan Test facility. The tip gap (TG) was reduced from 4 mm (0.26% fan diameter) to 2 mm (0.13% fan diameter), to 0 mm, for both fan configurations. The noise profile of each fan configuration at the same TG over the whole volumetric flow rate spectrum was compared to each other. The 4 mm (0.26%) TG is used as a baseline to measure the nett increase or decrease in sound levels. Noise emissions decreased as the TG was reduced. It is discovered that the four bladed fan configuration had lower noise emissions than the eight bladed fan configuration at all blade tip clearances at design flow rate. It is concluded that reducing the TG and number of blades, at constant solidity, reduces sound emissions. The 0 mm TG for the four bladed fan produced the greatest reduction in noise emissions. An increase in fan total-to-static performance is observed when reducing the TG for both fan configurations.
Citation: International Journal of Aeroacoustics
PubDate: 2023-06-08T08:42:13Z
DOI: 10.1177/1475472X231183156
|
Hybrid journal (It can contain Open Access articles)
