|
|
- Evolution of Miocene normal and dextral faulting in the lower Colorado
River region near Blythe, California, USA
Abstract: AbstractThe evolution of strain in nascent continental plate boundaries commonly involves distributed deformation and transitions between different styles of deformation as the plate boundary matures. Distributed NW-striking faults, many with km-scale right-lateral separation, are prevalent near Blythe, California, and have been variably interpreted to have accommodated either Middle Miocene NE-SW extension as normal faults or Late Miocene to Pliocene dextral shear as strike-slip faults. However, with poor timing and kinematic constraints, it is unclear how these faults relate to known domains of Neogene deformation and the evolution of the Pacific–NorthAmerica plate boundary. We present kinematic data (n = 642 fault planes, n = 512 slickenlines) that demonstrate that these faults dominantly dip steeply northeast; ~96% of measured faults record normal, dextral, or oblique dextral-normal kinematics that likely reflect a gradational transition between normal and dextral oblique kinematic regimes. We constrain fault timing with 11.7 Ma and 7.0 Ma 40Ar/39Ar dates of rocks cut by faults, and laser ablation–inductively coupled plasma–mass spectrometry U-Pb dating of calcite mineralized during oblique dextral faulting that demonstrates fault slip at ca. 10–7 Ma and perhaps as late as ca. 4 Ma. This Late Miocene dextral oblique faulting is best compatible with a documented regional transition from Early to Middle Miocene NE-directed extension during detachment fault slip to subsequent NW-directed dextral shear. We estimate 11–38 km of cumulative dextral slip occurred across a 50-km-wide zone from the Palen to Riverside mountains, including up to 20 km of newly documented dextral shear that may partly alleviate the regional discrepancy of cumulative dextral shear along this part of the Late Miocene Pacific–North America plate boundary.
PubDate: Fri, 25 Aug 2023 00:00:00 GMT
- Detrital zircon and apatite U-Pb provenance and drainage evolution of the
Newark Basin during progressive rifting and continental breakup along the
Eastern North American Margin, USA
Abstract: AbstractMesozoic rift basins of the Eastern North American Margin (ENAM) span from Florida in the United States to the Grand Banks of Canada and formed during progressive extension prior to continental breakup and the opening of the north-central Atlantic. The syn-rift strata from all the individual basins, lumped along the entire margin into the Newark Supergroup, are dominated by fluvial conglomerate and sandstone, lacustrine siltstone, mudstone, and abundant alluvial conglomerate and sandstone lithofacies. Deposition of these syn-rift sedimentary rocks was accommodated in a series of half grabens and subsidiary full grabens situated within the Permo-Carboniferous Appalachian orogen. The Mesozoic ENAM is commonly depicted as a magma-rich continental rift margin, with magmatism (Central Atlantic magmatic province [CAMP]) driving continental breakup. However, the southern portion of the ENAM shows evidence of magmatic breakup (e.g., seaward-dipping reflectors), and rifting and crustal thinning appeared to start ~30 m.y. prior to CAMP emplacement in the Jurassic. This study provides extensive new detrital zircon and apatite U-Pb provenance data to determine the provenance and reconstruct the paleodrainages of the Newark Basin during progressive rifting and magmatic breakup and the implications for the overall rift configuration and asymmetry during progressive rifting along the ENAM rift margin. Detailed new detrital zircon (N = 21; n = 3093) and apatite (N = 4; n = 559) U-Pb results from sandstone outcrop and core samples from the Newark Basin indicate a distinct provenance shift, with relatively older Carnian syn-rift strata predominately sourced from the hanging wall of the basin bounding fault in the east while relatively younger Norian strata were regionally sourced from both the hanging wall and footwall. The syn-rift strata at the Triassic-Jurassic boundary were sourced from the hanging wall before a transition to local footwall terranes. These results suggest two major provenance changes during progressive rifting—the first occurring during Carnian crustal necking and rift flank uplift as predicted by recent numerical models and the second occurring at the onset of the Jurassic due to regional and local thermal uplift during CAMP magmatism as seen along other magma-rich margins, such as the North Atlantic and the southern portion of the South Atlantic margin.
PubDate: Fri, 18 Aug 2023 00:00:00 GMT
- Early Ordovician seamounts preserved in the Canadian Cordillera:
Implications for the rift history of western Laurentia
Abstract: AbstractThe breakup of the supercontinent Rodinia and development of the western Laurentian rifted margin are in part recorded by Neoproterozoic to mid-Paleozoic igneous and sedimentary rock successions in the Canadian Cordillera. New bedrock mapping and volcanic facies analysis of Early Ordovician mafic rocks assigned to the Menzie Creek Formation in central Yukon allow reconstruction of the depositional environment during the volcanic eruptions, whole-rock geochemical data constrain the melting depth and crust-mantle source regions of the igneous rocks within the study area, and zircon U-Pb age studies provide determination of the precise timing of submarine eruptions. Menzie Creek Formation volcanic rocks are interlayered with continental slope strata and show lithofacies consistent with those of modern seamount systems. Representative seamount facies contain several kilometers of hyaloclastite breccia and pillow basalt with rare sedimentary rocks. Menzie Creek Formation seamounts form a linear array parallel to the Twopete fault, an ancient extensional or strike-slip fault that localized magmatism along the nascent western Laurentian margin. Zircon grains from two volcanic successions yielded high-precision chemical abrasion–thermal ionization mass spectrometry (CA-TIMS) dates of ca. 484 Ma (Tremadocian), which are interpreted as the age of eruption. Menzie Creek Formation rocks are alkali basalt and have oceanic-island basalt–like geochemical compositions. The whole-rock trace element and Nd-Hf isotope compositions are consistent with the partial melting of subcontinental lithospheric mantle at ~75–100 km depth. Post-rift, Early Ordovician seamounts in central Yukon record punctuated eruptive activity along a rift-related fault, the separation of a continental fragment from western Laurentia, or the oblique post-breakup kinematics from the counterclockwise rotation of Laurentia that facilitated local extension in the passive margin.
PubDate: Fri, 18 Aug 2023 00:00:00 GMT
- cdem: A macOS program for discrete element modeling of tectonic structures
Abstract: Abstractcdem is a macOS document-based application for two-dimensional discrete element modeling of tectonic structures and their associated deformation. Documents encapsulate simulations that can be run and explored simultaneously. A document contains three main views: (1) Set-up view, to define the assembly size, element properties, anisotropy, boundary conditions (type of faulting), overburden stress, erosion, and syn-tectonic sedimentation; (2) Summary view, which displays the details of the model after initialization; and (3) Results view, which displays the geometry of the model while it is running or after the run and allows exploring the model’s evolution in terms of geometry, displacement, strain, or stress. We illustrate the use of the program for assembly calibration and the modeling of contractional and extensional structures without and with syn-tectonic sedimentation. In all these cases, cdem produces realistic incremental and finite deformation. cdem is less powerful than its precursor cdem2D, but it can import and visualize cdem2D results, making the combined use of these two programs a robust suite for mechanically modeling tectonic structures.
PubDate: Thu, 10 Aug 2023 00:00:00 GMT
- Rate of E–W extension in the Volcanic Tableland, California (USA): A
comparison of strain rates on two different timescales
Abstract: AbstractThe Eastern California shear zone (USA) is a broad zone of transtensional deformation related to the relative motion between the Pacific and North American plates. Due to its active deformation and seismicity, the zone receives great attention, with specific focus on slip rates of major active faults. To contribute to a better understanding of the long-term strain accumulation in this zone, this study quantifies the long-term E–W-directed extensional strain rate based on the analysis of N–S-trending normal fault scarps in the 765-k.y.-old Bishop tuff (Volcanic Tableland). The average extensional strain rate determined over the past 765 k.y. is 0.29 ± 0.10 mm/yr per 10 km (29 ± 10 nanostrain/yr) and similar to the current rate of elastic strain accumulation rate in the Volcanic Tableland (0.30 ± 0.13 mm/yr per 10 km; 30 ± 13 nanostrain/yr) determined by Global Positioning System (GPS) data. The present-day E–W strain rate across the entire Eastern California shear zone at the latitude of the Volcanic Tableland is 0.36 ± 0.05 mm/yr per 10 km (36 ± 5 nanostrain/yr). This suggests that the local rate of E–W extension has not changed significantly since the mid-Pleistocene. Furthermore, if the Volcanic Tableland is representative of the greater region, as the GPS data suggest, this would also indicate a constant extension rate across the Eastern California shear zone at the latitude of ~37.5°N over the 765 k.y. time period. These results suggest that late Pleistocene and Holocene extension rates of major faults in this zone can be interpreted in light of a presumably unchanged far-field stress system since at least the mid-Pleistocene.
PubDate: Thu, 10 Aug 2023 00:00:00 GMT
- The Central Indian Tectonic Zone: A Rodinia supercontinent-forming
collisional zone and analogy with the Grenville and Sveconorwegian orogens
Abstract: AbstractIn the paleogeographic reconstructions of the Rodinia supercontinent, the circum-global 1.1–0.9 Ga collisional belt is speculated to skirt the SE coast of India, incorporating the Rodinian-age Eastern Ghats Province. But the Eastern Ghats Province may not have welded with the Indian landmass until 550–500 Ma. Instead, the ~1500-km-long, E-striking Central Indian Tectonic Zone provides an alternate option for linking the 1.1–0.9 Ga circum-global collisional belt through India. The highly tectonized Central Indian Tectonic Zone formed due to the early Neoproterozoic collision of the North India and the South India blocks. Based on a summary of the recent findings in the different crustal domains within the Central Indian Tectonic Zone, we demonstrate that the 1.03–0.93 Ga collision involved thrusting that resulted in the emplacement of low-grade metamorphosed allochthonous units above the high-grade basement rocks; the development of crustal-scale, steeply dipping, orogen-parallel transpressional shear zones; syn-collisional felsic magmatism; and the degeneration of orogenesis by extensional exhumation. The features are analogous to those reported in the broadly coeval Grenville and Sveconorwegian orogens. We suggest that the 1.1–0.9 Ga circum-global collisional belt in Rodinia swings westward from the Australo-Antarctic landmass and passes centrally through the Greater India landmass, which for the most part welded at 1.0–0.9 Ga. It follows that the paleogeographic positions of India obtained from paleomagnetic data older than 1.1–0.9 Ga are likely to correspond to the positions of the North and South India blocks, respectively, and not to the Greater India landmass in its entirety.
PubDate: Thu, 10 Aug 2023 00:00:00 GMT
- Andean-type, bivergent crustal shortening in the Rinkian orogen: New
constraints on the tectonic evolution of Laurentia–West Greenland in the
Paleoproterozoic
Abstract: AbstractThe “Rinkian belt” of West Greenland is a metamorphic terrain of Paleoproterozoic age comprising: (1) the north Rinkian fold-thrust belt (FTB)—a pro- or fore-arc domain, highly deformed and metamorphosed with widespread anatexis; (2) the Prøven Igneous Complex—a magmatic arc characterized by hypersthene granitic rocks (“charnockites”); (3) the south Rinkian FTB—an inverted back-arc basin; and 4) a continental margin or foreland. Recognition of this tectonic architecture demonstrates that the “Rinkian” is a bona fide orogenic belt—the Rinkian orogen— and not simply the imbricated lower plate of the Nagssugtoqidian orogen. Arc plutons of the Prøven Igneous Complex were emplaced into the Karrat Group at ca. 1.90–1.85 Ga, dividing a back-arc basin into pro- and retro-arc domains. In the former—the north Rinkian FTB—WSW-directed thrusting (deformation events D1-D2) and high-grade metamorphism were taking place by ca. 1.875 Ga and were continuous through ca. 1.850 Ga with a peak temperature at ca. 1.830 Ma accompanied by anatexis in the Karrat Group and lower units of the Prøven Igneous Complex. In the retro-arc domain—the south Rinkian FTB—thrusting to the E (D1) began at ca. 1.870 Ma followed by thrusting to the W (D2) at ca. 1.830–1.820 Ga with displacement focused into a major high-temperature ductile shear zone which carried the Prøven Igneous Complex in the hanging wall of an Andean-type, crustal-scale, “pop-up” structure. High-temperature deformation continued during D3 when the pro-arc, arc, and retro-arc domains were shortened by bivergent detachment folding and thrusting at ca. 1.820–1.810 Ga.
PubDate: Thu, 27 Jul 2023 00:00:00 GMT
- Early Triassic roll-back of subducted Paleo-Tethys oceanic lithosphere:
Insights from A 2 -type silicic igneous rocks in the Pingxiang area,
southwest China
Abstract: AbstractA suite of subduction-related early Triassic igneous rocks crops out in the Pingxiang area of the Dian-Qiong suture (DQS) in southwest China; this suite represents an important geological record of subduction and closure of the Paleo-Tethys Ocean. In this study, we report geochronological, geochemical, and Nd-Hf isotope data for newly discovered rhyolites and biotite granites in the Pingxiang area. We use these data to constrain their emplacement ages, origins, and geodynamic implications. Zircon U-Pb dating indicates that the rhyolites and biotite granites were emplaced at 251–250 Ma and 249 Ma (early Triassic), respectively. The rhyolites and biotite granites have elevated FeOT/(FeOT + MgO) (0.78–0.89) and 10,000 × Ga/Al (2.83–4.11) ratios, with geochemical affinities to A2-type granites. These rocks are enriched in some large-ion lithophile elements (e.g., Rb, Th, and Ba) and depleted in high-field-strength elements (e.g., Nb, Ta, and Ti), indicating their formation in a subduction-related arc. The rhyolites and biotite granites have negative whole-rock εNd(t) (−11.5 to −9.7) and zircon εHf(t) (−14.5 to −6.2) values, suggesting that these magmas were derived from an ancient crust-dominated source. Geochemical and Nd isotope data reveal that the peraluminous A2-type rhyolites and biotite granites were derived by partial melting of felsic crustal rocks under low-pressure and high-temperature conditions. By integrating all the available data with the regional tectonic evolution of the southwestern Youjiang Basin and adjacent regions, we attribute the generation of the peraluminous A2-type rhyolites and biotite granites to the extensional setting that existed during oceanic subduction, which was induced by roll-back of thePaleo-Tethys oceanic lithosphere at 251–249 Ma. This study indicates that subduction-related magmatism related to Paleo-Tethys oceanic lithosphere was still active in the early Triassic.
PubDate: Thu, 27 Jul 2023 00:00:00 GMT
- Ibex Hollow Tuff from ca. 12 Ma supereruption, southern Idaho, identified
across North America, eastern Pacific Ocean, and Gulf of Mexico
Abstract: AbstractThe Ibex Hollow Tuff, 12.08 ± 0.03 Ma (40Ar/39Ar), is a widespread tephra layer erupted from the Bruneau-Jarbidge volcanic field of southern Idaho. Tephra from this eruption was deposited across much of western and central North America and adjacent ocean areas. We identified the Ibex Hollow Tuff at Trapper Creek, Idaho, near its eruption site, and at 15 distal sites, from the Pacific Ocean to the Gulf of Mexico, by the chemical composition of its glass shards, using electron-microprobe analysis, instrumental neutron activation analysis, and laser-ablation–inductively coupled plasma–mass spectrometry. By these methods, we distinguished the Ibex Hollow Tuff from overlying and underlying tephra layers near its source and at distal sites. Fluvially reworked Ibex Hollow Tuff ash was transported by the ancestral Mississippi River drainage from the interior of the North American continent to the Gulf of Mexico, where it is present within an ~50-m-thick deposit in marine sediments in the subsurface. The minimum fallout area covered by the ash is ~2.7 million km2, with a minimum volume of ~800 km3, and potential dispersal farther to the north and northeast. The areal distribution for the Ibex Hollow Tuff is similar to that of the Lava Creek B (0.63 Ma) supereruption. The Ibex Hollow Tuff represents a unique chronostratigraphic marker allowing a synoptic view of paleoenvironments at a virtual moment in time across a large terrestrial and marine region. The Ibex Hollow Tuff is also an important marker bed for North American Land Mammal Ages, and it coincides with climatic cooling in the middle to late Miocene documented in marine cores.
PubDate: Thu, 20 Jul 2023 00:00:00 GMT
- Crustal structure of the Lazufre volcanic complex and the Southern Puna
from 3-D inversion of magnetotelluric data: Implications for surface
uplift and evidence for melt storage and hydrothermal fluids
Abstract: AbstractThe Central Andes are unique in the global system of subduction zones in that a significant, high-altitude plateau has formed above a subduction zone. In this region, both subduction and the associated magmatism have been shown to vary in both space and time. Geophysical data have been invaluable in determining the subsurface structure of this region. Extensive seismic studies have determined the regional-scale distribution of partial melt in the crust and upper mantle. Magnetotelluric studies have been effective in providing independent constraints on the quantity and composition of partial melt in the crust and upper mantle. Geodetic studies have shown that a small number of volcanic centers exhibit persistent, long-term uplift that may indicate the formation of plutons or future eruptions.This paper describes a detailed study of the Southern Puna using magnetotelluric (MT) data. This region is located at the southern limit of the Central Andes in a region where a recent transition from flat-slab subduction to normal subduction has caused an increase in magmatism, in addition to hypothesized lithospheric delamination. It is also a region where an extensive zone adjacent to the volcanic arc is undergoing surface uplift, located near Volcán Lastarria and Cordon del Azufre (collectively called Lazufre). The main goals of the work are to define the crustal structure and to investigate processes that may cause surface uplift of relatively large regions not associated with active volcanism.As part of the PLUTONS project, MT data were collected on an east-west transect (approximately along 25°S) that extended across the Southern Puna, from Lazufre to north of Cerro Galan. The data were combined with previously collected MT data around Lazufre and inverted to give a 3-D resistivity model of the crust. The low resistivity of the crust resulted in limited sensitivity to mantle structure. A number of major crustal conductors were detected and included (1) a mid-crustal conductor extending eastward from the volcanic arc as far as the Salar de Antofalla; (2) an upper- to mid-crustal conductor located north of Cerro Galan; and (3) a conductor that rises westward from (1) and terminates directly beneath the region of surface uplift at Lazufre. These conductors are broadly coincident with the location of crustal low shear-wave anomalies. The conductive features were interpreted to be due to zones of partial melt stored in the crust, and petrological data were used to estimate melt fractions. Below Lazufre, it is likely that aqueous fluids contribute to the high conductivity, which is observed within the depth range of the inflation source, giving evidence that the surface uplift may be associated with both magmatic and hydrothermal processes.
PubDate: Thu, 20 Jul 2023 00:00:00 GMT
- Coupling rare earth element analyses and high-resolution topography along
fault scarps to investigate past earthquakes: A case study from the
Southern Apennines (Italy)
Abstract: AbstractThe systematic study of faults that have released strong earthquakes in the past is a challenge for seismic hazard assessment. In carbonate landscapes, the use of rare earth element (REE) concentrations on slickensides may aid the reconstruction of fault slip history. We applied this methodology to the Caggiano normal fault (Southern Apennines, Italy), cropping out southeast of the Irpinia 1980 CE earthquake fault (Mw 6.9), which was responsible for both the 1561 CE and partly the 1857 CE Basilicata earthquakes (Mw 6.7 and 7.1). We integrated the REE analysis approach with a high-resolution topographic analysis along 98 serial topographic profiles to measure vertical separations attributable to faulting since the Last Glacial Maximum (LGM). The asymmetric scarp height profiles suggest fault-lateral propagation and along-strike variations in the fault evolution. Our results indicate the occurrence of 7 to 11 earthquakes with variable slip between ~40 cm and ~70 cm within post-LGM times. We estimated the magnitudes of the respective earthquakes, between 5.5 and 7.0, and most commonly between 6.3 and 6.5. The results suggest a recurrence time between 1.6 k.y. and 2.3 k.y. and a slip rate ranging between 0.6 mm/yr and 0.9 mm/yr. This approach may be useful for application to carbonate fault planes in similar tectonic contexts worldwide.
PubDate: Thu, 20 Jul 2023 00:00:00 GMT
- Early Paleozoic crustal anatexis during Wuyi-Yunkai orogenesis: Insights
from zircon of Fuhuling migmatites in the Yunkai region, South China
Abstract: AbstractCrustal anatexis is an important process in the tectonic evolution of many orogenic systems. In the Wuyi-Yunkai orogen in the South China block, the duration of partial melting and its relationship with orogenesis are poorly constrained. In this study, we present a multifaceted approach to determine the timing of anatexis and unravel the petrogenesis of Fuhuling migmatites in the Yunkai region of the southwestern South China block. Geochemical analyses indicate that the migmatites have (meta-)sedimentary protoliths. The absence of anhydrous peritectic minerals but the presence of microstructural and outcrop-scale indicators of partial melting suggest that the Fuhuling migmatites experienced fluid-present melting. Complex zoning and variable trace element concentrations in newly formed zircons in migmatites reflect their evolutionary histories during partial melting. Anatectic melt was present at Fuhuling in the Yunkai region from ca. 449–427 Ma during early Paleozoic Wuyi-Yunkai orogenesis. The wide variety of morphologies observed in the Fuhuling migmatites implies that migmatites in the Yunkai region experienced incipient partial melting, melt segregation, and melt migration. Combining new and previous results, we argue that the Yunkai region experienced two stages of crustal anatexis during the early Paleozoic, which may have been triggered by crustal thickening followed by rapid exhumation and orogenic collapse during the intra-plate Wuyi-Yunkai orogeny in the South China block.
PubDate: Thu, 20 Jul 2023 00:00:00 GMT
- Grooving in the midcontinent: A tectonic origin for the mysterious
striations of L’Anse Bay, Michigan, USA
Abstract: AbstractA striated surface is present at an erosional unconformity between foliated Paleoproterozoic Michigamme Formation and fluvial conglomerate and sandstone of the Neoproterozoic Jacobsville Formation exposed at L’Anse Bay (Michigan, USA). These striations have been interpreted to be the result of ice flow in either the Proterozoic, the Pleistocene, or the modern. Recently, the glacial origin interpretation for this striated surface has been used to argue that it may be related to ca. 717–635 Ma Cryogenian snowball Earth glaciation. This interpretation would make the surface a rare example of a Neoproterozoic glacial pavement, with major chronostratigraphic implications that in turn impose constraints on the timing of intracratonic erosion related to the formation of the Great Unconformity. In this contribution, we present new observations showing that the surface is a tectonic slickenside caused by largely unconformity-parallel slip along the erosional unconformity. We document structural repetition of the Michigamme-Jacobsville contact with associated small-scale folding. The unconformity-parallel slip transitions into thrust faults that ramp up into the overlying Jacobsville Formation. We interpret that the surface records contractional deformation rather than ancient glaciation, recent ice movement, or recent mass wasting. The faulting likely occurred during the Rigolet phase of the Grenvillian orogeny, which also folded the Jacobsville Formation in the footwall of the Keweenaw fault.
PubDate: Thu, 20 Jul 2023 00:00:00 GMT
- Decoupled Oligocene mylonitic shearing and Miocene detachment faulting in
the East Humboldt Range metamorphic core complex, northeast Nevada, USA
Abstract: AbstractThe relationships between brittle detachment faulting and ductile shear zones in metamorphic core complexes are often ambiguous. Although it is commonly assumed that these two structures are kinematically linked and genetically related, direct observations of this coupling are rare. Here, we conducted a detailed field investigation to probe the connection between a detachment fault and mylonitic shear zone in the Ruby Mountain–East Humboldt Range metamorphic core complex, northeast Nevada. Field observations, along with new and published geochronology, demonstrate that Oligocene top-to-the-west mylonitic shear zones are crosscut by ca. 17 Ma subvertical basalt dikes, and these dikes are in turn truncated by middle Miocene detachment faults. The detachment faults appear to focus in preexisting weak zones in shaley strata and Mesozoic thrust faults. We interpret that the Oligocene mylonitic shear zones were generated in response to domal upwelling during voluminous plutonism and partial melting, which significantly predated the middle Miocene onset of regional extension and detachment slip. Our model simplifies mechanical issues with low-angle detachment faulting because there was an initial dip to the weak zones exploited by the future detachment-fault zone. This mechanism may be important for many apparent low-angle normal faults in the eastern Great Basin. We suggest that the temporal decoupling of mylonitic shearing and detachment faulting may be significant and underappreciated for many of the metamorphic core complexes in the North American Cordillera. In this case, earlier Eocene–Oligocene buoyant doming may have preconditioned the crust to be reactivated by Miocene extension, thus explaining the spatial relationship between structures.
PubDate: Thu, 20 Jul 2023 00:00:00 GMT
|
Open Access journal
