Authors:Asep Rachmat Pages: 571 - 573 Abstract: So far, the drying process carried out by farmers is still simple, namely by drying it directly in the sun. This method is less effective because it will require a large area with a relatively long drying time of 10-12 days. The author will conduct research on the design and testing of a red chili drying machine using Solidwork software. The drying process used in this red chili drying machine uses a tubular heater. It is hoped that the design of this red chili drying machine can increase the production of dry red chilies. The results of the research show that the chili drying machine is designed into 2 parts that are bulkhead using a filter with dimensions of 385 x 320 mm, the dimensions of the drying room are 400 mm long, 421 mm wide, 353 mm high, in the drying room section there are 10 shelves that can be assembled and assembled. with dimensions of 400 x 380 mm for storing chilies to be dried and the dimensions of the combustion chamber having dimensions of 140 mm in length, 421 mm in width and 353 mm in height, then the tool will be made of stainless steel sheet with a thickness of 3 mm. / fan with a diameter of 170 mm which has 5 propeller blades, and the fan is rotated using an electric motor type yj62-25 with a voltage of 100-240 VAC, a frequency of 50/60 HZ and a power of 5-100W. PubDate: 2022-01-21 Issue No:Vol. 8, No. 01 (2022)
Authors:Harun Sujadi, Tantri Wahyuni Pages: 574 - 581 Abstract: The socket is an electrical installation that functions as a liaison between electric current and electrical equipment, one example is a garden lamp. To be able to turn on, you need a power outlet, but manual sockets are considered less effective due to the development of human habits leaving the house with the lights still on. With current technological developments, namely utilizing internet of things (IoT) technology, a smart socket is made that can be controlled remotely via a smartphone. The smart socket is made using Wemos D1 R1 as the microcontroller and is equipped with a raindrop sensor as a safety where the system will turn off the electricity automatically when the sensor detects water and a notification will appear on the smartphone as if water has been detected, so users don't have to worry about leaving the house. with a state of forgetting not to turn off the garden lights. PubDate: 2022-01-21 Issue No:Vol. 8, No. 01 (2022)
Authors:nunu nurdiana, Budiman Budiman, whydiantoro whydiantoro Pages: 582 - 591 Abstract: Feeling disorder a group of clinical features characterized by reduced or lost emotional control and self-control. Affective disorders can be depression, manic or a mixture of both (bipolar). Someone who has mood disorders needs treatment as early as possible through early detection and an accurate assessment is carried out in consultation with a psychologist. So a system is needed that can detect the possible disturbance of the mood. Expert systems are part of artificial intelligence that mimics the slow pace of an expert. Bayes' Theorem is a way of knowing conditional probabilities. Conditional probability is the probability of an event occurring, given that it has some relationship with one or more other events. The probability value of symptoms and disease is obtained based on the experience of an expert. This expert system can produce a process of diagnosing mood disorders with some data about mood disorders in the form of symptom data, disease data and its probability value. The accuracy rate is 100% using 10 test data. An expert system for diagnosing mood disorders which is designed to be an Android-based application of JavaScript and PHP as a programming language, Cordova as a framework for creating mobile applications, PHP 7.2.1 as a web server, MySQL 5.0.21 as a database. PubDate: 2022-01-21 Issue No:Vol. 8, No. 01 (2022)
Authors:whydiantoro whydiantoro, Dony Susandi, intan kusumadewi Pages: 592 - 598 Abstract: The use of human labor in the industrial world in Indonesia is still very dominant, especially in Manual Material Handling (MMH) activities. The activity of bending and twisting in the workplace while doing MMH should be reduced or even if possible this activity should be eliminated because this attitude is prone to causing disorders of the musculoskeletal system. Considering that MMH activities have a vital role in the work carried out in the production process section, therefore the researcher will conduct an analysis of the Manual Material Handling (MMH) work posture using the Rapid Upper Limb Assessment (RULA). RULA is a work posture research method to investigate disorders of the upper limbs. The results of the work posture analysis based on the results of the assessment using the RULA method stated that all manual material handling activities assessed above required corrective action or efforts. In the shuttle area, the final score for the action category obtained is 7 with a high risk level and the action that must be taken is action now. In the Pirn Winder area, the final score for the action category obtained is 6 with a moderate risk level and the action that must be taken is action in the near future. In the vacuum heat setter area, the final score for the action category obtained is 7 with a high level of risk and the action that must be taken is action now. PubDate: 2022-01-21 Issue No:Vol. 8, No. 01 (2022)
Authors:runal rezkiawan , Muhammad Niswar, Amil Ahmad Ilham Pages: 599 - 610 Abstract: Soft crab is an export product where foreign demand is much higher than production. In the production of soft crabs, it is done by keeping the crabs individually in a crab box which is placed in the pond until they molt. Molting is a natural process of molting, i.e. removing the old tough skin for growth purposes. Shortly after molting, the new crab shells are still very soft and will harden again after water absorption occurs. Therefore it is important to monitor molting crabs to help farmers in the cultivation of soft shell crabs. The number of crab datasets is 1060 which consists of 1000 training data and 60 testing data. There are several popular image classification algorithms, namely K-Nearest Neighbors (KNN), Support Vector Machine (SVM), and Random Forest Classifier (RFC). KNN, SVM, and RFC are classification algorithms from Machine Learning. This study aims to compare the performance of the three algorithms so that the performance of the three algorithms is known. Several parameters are used to configure the KNN, SVM, and RFC algorithms. From the results of the trials conducted, KNN has the best performance with 98.33% accuracy, 98.33% precision, 98.38% recall, and 98.38% F1 Score. PubDate: 2022-01-21 Issue No:Vol. 8, No. 01 (2022)
Authors:Arief Rijaluddin Pages: 611 - 618 Abstract: Planning and controlling costs and time is part of the overall construction project management. In addition to the assessment in terms of quality, the achievement of a project can also be assessed in terms of cost and time. The costs that have been incurred and the time spent in completing a job must be measured continuously for deviations from the plan. The presence of significant cost and time deviations indicates poor project management. With the existence of project performance indicators in terms of cost and time this allows preventive actions so that project implementation goes according to plan. The concept of "Earned Value" is one of the tools used in project management that integrates cost and time and by using Ms. Projects. Ms. Project is a project management software product and is developed and sold by Microsoft. It is designed to assist a project manager in developing plans, assigning resources and tasks, tracking progress, managing budgets and analyzing workloads. From the results of the evaluation of cost control and project schedules on outpatient and basement building construction projects using the earned value method, it can be concluded that the CV (Cost Variant) in this project results in 0 which means the Zero Number on the Cost Variant indicates that the cost is within the budget, SV (Schedule). Variant ) the value shows a negative number, this means that the completion of the work is delayed, the CPI (Cost Performance Index) is 1, meaning that the expenditure is in accordance with the project budget PubDate: 2022-01-21 Issue No:Vol. 8, No. 01 (2022)
Authors:Juanita Juanita Pages: 619 - 623 Abstract: Concrete is the main basic material used for the planning and design of widely used structures. This is because concrete has a very high compressive strength value when compared to other materials. However, concrete also has weaknesses, one of which is its brittle nature. Therefore, in this study, the use of Z-shaped bendrat wire will be carried out to increase the value of the compressive strength of concrete while improving the brittle nature of the concrete.In this study, bendrat wire fiber in the form of Z was used with a mixed variation of 0.5%, 0.75% and 1%. The number of test objects made is 12 pieces. The test was carried out when the specimen was 28 days old by using a Compression Testing Machine (CTM). From the results of the study, the average compressive strength value for normal concrete (SN) was 26.46 MPa, for Z-shaped bendrat wire fiber concrete with a mixed variation of 0.5% (SF1) the average compressive strength value was 27.27 MPa, for fiber concrete bendrat wire Z shape with a mixed variation of 0.75% (SF2) the average compressive strength value is 28.03 MPa, and for fiber concrete wire bendrat Z shape with a mixed variation of 1% (SF3) the average compressive strength value is 28.21 MPa. The more Z-shaped bendrat wire fibers added to the concrete mix, the higher the compressive strength value and the smaller the cracks that occur in the concrete. PubDate: 2022-01-29 Issue No:Vol. 8, No. 01 (2022)
Authors:Aisyah Nur Ardhillah Zuhdi, Michael Sonny, Mohammad Fazrie Pages: 624 - 628 Abstract: Work productivity is the ability of employees to produce compared to the input used, an employee can be said to be productive if he is able to produce services in accordance with the expected time. The purpose of this study is to analyze the system that is running on the Validation Team. The research method used is the waterfall method to describe the running system and the design to be built. The method of analysis that the researcher uses is by conducting direct observations at the company, conducting research on problems, documentation by studying existing documents, and interviews with several parties involved in the Validation Team. Researchers get research results that the productivity management system is beneficial for companies, especially in the Validation Team. As for the benefits of increasing the performance of the Validation Team, the results of the information work produced will be more structured, accurate, and processing time becomes more effective. The conclusion of this research is the implementation of a productivity application system on the Validation Team, providing convenience in the work system, solving problems in recapitulating team work productivity data, and providing convenience in making the final productivity report.. PubDate: 2022-01-31 Issue No:Vol. 8, No. 01 (2022)
Open Access journal
[4 journals]
