|
|
3D Printing and Additive Manufacturing
Journal Prestige (SJR): 0.808  Citation Impact (citeScore): 2 Number of Followers: 27  Subscription journalISSN (Print) 2329-7662 - ISSN (Online) 2329-7670 Published by Mary Ann Liebert  [102 journals]
|
- Additive Construction
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Benjamin Dillenburger
Pages: 83 - 83
Abstract: 3D Printing and Additive Manufacturing, Volume 9, Issue 2, Page 83-83, April 2022.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-11T07:00:00Z
DOI: 10.1089/3dp.2022.29018.bd
Issue No: Vol. 9, No. 2 (2022)
-
- A New Device for In Situ Dental Biofilm Collection Additively Manufactured
by Direct Metal Laser Sintering and Vat Photopolymerization-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Pernille Thestrup Rikvold, Karina Kambourakis Johnsen, Dirk Leonhardt, Andreas Møllebjerg, Signe Maria Nielsen, Lea Benedicte Skov Hansen, Rikke Louise Meyer, Sebastian Schlafer
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-05-12T07:00:00Z
DOI: 10.1089/3dp.2022.0009
-
- Bio-Physical Properties of Acetylated Chitosan/Poly(ɛ-Caprolactone)
Composites for Three-Dimensional Printing Material Applications-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Jin Ik Lim
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-05-12T07:00:00Z
DOI: 10.1089/3dp.2022.0047
-
- Direct Ink Writing of Carbon-Doped Polymeric Composite Ink: A Review on
Its Requirements and Applications-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ratnesh Raj, Amit Rai Dixit
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-05-04T07:00:00Z
DOI: 10.1089/3dp.2021.0209
-
- Optimization of Surface Roughness and Density of Overhang Structures
Fabricated by Laser Powder Bed Fusion-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Hong-You Lin, Hong-Chuong Tran, Yu-Lung Lo, Trong-Nhan Le, Kuo-Chi Chiu, Yuan-Yao Hsu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-05-03T07:00:00Z
DOI: 10.1089/3dp.2021.0180
-
- Three-Dimensional Additive Manufacturing of Artificial Oil Reservoir Rock
Core Plugs for Core Flooding Experimental Tests-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Juan Antonio Cruz-Maya, Luis Carlos Martínez-Mendoza, Florencio Sánchez-Silva, José Alfredo Rosas-Flores, Janet Jan-Roblero
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-05-02T07:00:00Z
DOI: 10.1089/3dp.2021.0149
-
- Investigating the Effect of Design Parameters on the Mechanical
Performance of Contact Wave Springs Designed for Additive Manufacturing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Muhammad Rizwan ul Haq, Aamer Nazir, Shang-Chih Lin, Jeng-Ywan Jeng
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-05-02T07:00:00Z
DOI: 10.1089/3dp.2021.0313
-
- Capacitance of Flexible Polymer/Graphene Microstructures with High
Mechanical Strength-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Vahid Nasirian, Amir Ehsan Niaraki-Asli, Saurabh S. Aykar, Mehrnoosh Taghavimehr, Reza Montazami, Nicole N. Hashemi
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-29T07:00:00Z
DOI: 10.1089/3dp.2022.0026
-
- Defining Soft Tissue: Bitmap Printing of Soft Tissue for Surgical Planning
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Nicholas Jacobson, Erik Carerra, Lawrence Smith, Lorna Browne, Nicholas Stence, Alison Sheridan, Robert MacCurdy
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-28T07:00:00Z
DOI: 10.1089/3dp.2021.0141
-
- 3D Printing of Noncytotoxic High-Resolution Microchannels in Bisphenol-A
Ethoxylate Dimethacrylate Tissue-Mimicking Materials-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Roger Domingo-Roca, Lauren Gilmour, Oana Dobre, Stylianos Sarrigiannidis, Mairi E. Sandison, Richard O'Leary, Joseph C. Jackson-Camargo, Helen E. Mulvana
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-28T07:00:00Z
DOI: 10.1089/3dp.2021.0235
-
- Studying the Effect of Short Carbon Fiber on Fused Filament Fabrication
Parts Roughness via Machine Learning-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Alberto García-Collado, Pablo Eduardo Romero-Carrillo, Rubén Dorado-Vicente, Munish Kumar Gupta
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-28T07:00:00Z
DOI: 10.1089/3dp.2021.0304
-
- Finding Ideal Parameters for Recycled Material Fused Particle
Fabrication-Based 3D Printing Using an Open Source Software Implementation
of Particle Swarm Optimization-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Shane Oberloier, Nicholas G. Whisman, Joshua M. Pearce
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-28T07:00:00Z
DOI: 10.1089/3dp.2022.0012
-
- Biobased Resin for Sustainable Stereolithography: 3D Printed Vegetable Oil
Acrylate Reinforced with Ultra-Low Content of Nanocellulose for Fossil
Resin Substitution-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Anda Barkane, Maksims Jurinovs, Sabine Briede, Oskars Platnieks, Pavels Onufrijevs, Zane Zelca, Sergejs Gaidukovs
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-27T07:00:00Z
DOI: 10.1089/3dp.2021.0294
-
- Interfacial Weakness Criterion by Indentation in 3D Printed Concrete
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Maria Taleb, David Bulteel, Damien Betrancourt, Francine Roudet, Sébastien Rémond, Didier Chicot
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-08T07:00:00Z
DOI: 10.1089/3dp.2021.0128
-
- Fluid Thermodynamic Simulation of Ti-6Al-4V Alloy in Laser Wire Deposition
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Xiang Wang, Lin-Jie Zhang, Jie Ning, Suck-Joo Na
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-08T07:00:00Z
DOI: 10.1089/3dp.2021.0159
-
- Evaluation of the Morphological Effects of Hydroxyapatite Nanoparticles on
the Rheological Properties and Printability of
Hydroxyapatite/Polycaprolactone Nanocomposite Inks and Final Scaffold
Features-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Mansure Kazemi, Motahareh Mirzadeh, Hasti Esmaeili, Elahe Kazemi, Mohammad Rafienia, Seyed Ali Poursamar
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-01T07:00:00Z
DOI: 10.1089/3dp.2021.0292
-
- Powder Bed Fusion Versus Material Extrusion: A Comparative Case Study on
Polyether-Ether-Ketone Cranial Implants-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yaan Liu, Nan Yi, Richard Davies, Paul McCutchion, Oana Ghita
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-04-01T07:00:00Z
DOI: 10.1089/3dp.2021.0300
-
- Laser Powder Bed Fusion of Sm-Fe-N Bonded Magnets Employing Flake Powders
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Melissa Röhrig, Rafael Gitti Tortoretto Fim, Rubens Nunes de Faria, Cristiani Campos Plá Cid, Carlos Henrique Ahrens, Paulo Wendhausen
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-29T07:00:00Z
DOI: 10.1089/3dp.2021.0228
-
- A Micro-Scale Non-Linear Finite Element Model to Optimize the Mechanical
Behavior of Bioprinted Constructs-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Abhinaba Banerjee, Sudipto Datta, Ankita Das, Amit Roy Chowdhury, Pallab Datta
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-29T07:00:00Z
DOI: 10.1089/3dp.2021.0238
-
- Mechanical Performance of Lightweight-Designed Honeycomb Structures
Fabricated Using Multijet Fusion Additive Manufacturing Technology-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Aamer Nazir, Ahmad Bin Arshad, Shang-Chih Lin, Jeng-Ywan Jeng
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-23T07:00:00Z
DOI: 10.1089/3dp.2021.0004
-
- Generative Design of Structured Materials for Controlled Frequency
Responses-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wuxin Yang, Loulin Huang, Sarat Singamneni
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-22T07:00:00Z
DOI: 10.1089/3dp.2021.0241
-
- The Application of a Multi-Material Flexible Chain Mail for the Design of
an Artificial Spinal Disc to Reproduce Natural Nonlinear and Anisotropic
Rotational Behavior-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Zhiyang Yu, Kristina Shea, Tino Stankovic
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-22T07:00:00Z
DOI: 10.1089/3dp.2021.0299
-
- Multiscale Porous Poly (Ether-Ether-Ketone) Structures Manufactured by
Powder Bed Fusion Process-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yaan Liu, Richard Davies, Nan Yi, Paul McCutchion, Binling Chen, Oana Ghita
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-22T07:00:00Z
DOI: 10.1089/3dp.2021.0317
-
- The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene
Terephthalate Glycol Multi-Material Structures Manufactured by Material
Extrusion-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Emre Demir, İnal Kaan Duygun, Ayşe Bedeloğlu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-03-22T07:00:00Z
DOI: 10.1089/3dp.2021.0321
-
- Regenerative Topology Optimization of Fine Lattice Structures
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Sofia Di Toro Wyetzner, Salvy Cavicchio, Andrew Moshova, Hod Lipson
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-28T08:00:00Z
DOI: 10.1089/3dp.2021.0086
-
- Fast and Accurate Defects Detection for Additive Manufactured Parts by
Multispectrum and Machine Learning-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Lingbao Kong, Xing Peng, Yao Chen
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-28T08:00:00Z
DOI: 10.1089/3dp.2021.0191
-
- Centrifugation-Assisted Three-Dimensional Printing of Devices Embedded
with Fully Enclosed Microchannels-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chia-Heng Chu, Enerelt Burentugs, Dohwan Lee, Jacob M. Owens, Ruxiu Liu, Albert B. Frazier, A. Fatih Sarioglu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-14T08:00:00Z
DOI: 10.1089/3dp.2021.0133
-
- Modeling and Simulation of Additively Manufactured Cylindrical Component
Using Combined Thermomechanical and Inherent Strain Method with
Nelder–Mead Optimization-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Thoufeili Taufek, Yupiter H.P. Manurung, Mohd Shahriman Adenan, Syidatul Akma, Hui Leng Choo, Borhen Louhichi, Martin Bednardz, Izhar Aziz
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-14T08:00:00Z
DOI: 10.1089/3dp.2021.0197
-
- Fabricating Wood-Like Textures on Multicurved 3D Printed Architectural
Elements-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: John Mai, Eduardo De Oliveira Barata, Sandra Karina Löschke, Gwénaëlle Proust
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-11T08:00:00Z
DOI: 10.1089/3dp.2021.0139
-
- Study of Low-Pressure Cold Spray Additive Manufacturing: Investigation of
Kinematic Spray Parameters on Deposition and Properties-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wenbo Li, Hongjian Wu, Christophe Verdy, Sophie Costil, Hanlin Liao, Sihao Deng
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-11T08:00:00Z
DOI: 10.1089/3dp.2021.0260
-
- Performance Analysis of Conventional and DMLS Copper Electrode During EDM
Process in AA4032-TiC Composite-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Senthilkumar Thangarajan Sivasankaran, Senthil Kumar Shanmugakani, Rathinavel Subbiah
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-03T08:00:00Z
DOI: 10.1089/3dp.2021.0030
-
- Mechanical Performance of Three-Dimensional Printed Lattice Structures:
Assembled Versus Direct Print-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Adeeb Alam, Keith Berube, Masoud Rais-Rohani, Bashir Khoda
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-03T08:00:00Z
DOI: 10.1089/3dp.2021.0207
-
- Cross Section Contour Extraction Algorithm of Additive Manufacturing
Micromixers-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wenjie Niu, Mengxue Yang, Yu Liu, Yu Gong, Ying Xu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-02-03T08:00:00Z
DOI: 10.1089/3dp.2021.0245
-
- The Quantitative Impact of Using 3D Printed Anatomical Models for Surgical
Planning Optimization: Literature Review-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: María Clara Betancourt, Carlos Arau´jo, Sara Marín, Wanda Buriticá
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-31T08:00:00Z
DOI: 10.1089/3dp.2021.0188
-
- Selective Laser Melting of Commercially Pure Molybdenum by Laser
Rescanning-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Navid Alinejadian, Pei Wang, Lauri Kollo, Konda Gokuldoss Prashanth
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-27T08:00:00Z
DOI: 10.1089/3dp.2021.0265
-
- Fabrication of Multi-Channel Nerve Guidance Conduits Containing Schwann
Cells Based on Multi-Material 3D Bioprinting-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Liming Zhang, Hui Zhang, Heran Wang, Kai Guo, Huixuan Zhu, Song Li, Feiyang Gao, Shijie Li, Zhenda Yang, Xin Liu, Xiongfei Zheng
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-25T08:00:00Z
DOI: 10.1089/3dp.2021.0203
-
- Improvement of Processability Characteristics of Porcelain-Based
Formulations Toward the Utilization of 3D Printing Technology-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Liliana Sofia Oliveira Pires, Daniel Gil Afonso, Maria Helena Figueira Vaz Fernandes, José Martinho Marques de Oliveira
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-21T08:00:00Z
DOI: 10.1089/3dp.2021.0102
-
- Recovery of 17β-Estradiol Using 3D Printed Polyamide-12 Scavengers
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Janne Frimodig, Aino Autio, Elmeri Lahtinen, Matti Haukka
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-13T08:00:00Z
DOI: 10.1089/3dp.2021.0063
-
- Failure Behavior of Laser Metal Deposited Additive Manufacturing
Ti-6Al-4V: Effects of Stress State and Initial Defects-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chang Peng, Peng-Hui Li, Wei-Guo Guo, Rui-Feng Wang, Yan-Ping Li
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-13T08:00:00Z
DOI: 10.1089/3dp.2021.0101
-
- A Review of In Situ Defect Detection and Monitoring Technologies in
Selective Laser Melting-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Xing Peng, Lingbao Kong, Huijun An, Guangxi Dong
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-13T08:00:00Z
DOI: 10.1089/3dp.2021.0114
-
- Assessing Leachable Cytotoxicity of 3D-Printed Polymers and Facile
Detoxification Methods-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Venkatakrishnan Rengarajan, Angela Clyde, Jefferson Pontsler, Jonathan Valiente, Adreann Peel, Yu Huang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-13T08:00:00Z
DOI: 10.1089/3dp.2021.0216
-
- Rapid Volumetric Additive Manufacturing in Solid State: A Demonstration to
Produce Water-Content-Dependent Cooling/Heating/Water-Responsive Shape
Memory Hydrogels-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Abhijit Vijay Salvekar, Faqrul Hasif Bin Abdul Nasir, Ya Hui Chen, Sharanya Maiti, Vivek Damodar Ranjan, Hong Mei Chen, Han Wang, Wei Min Huang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-12T08:00:00Z
DOI: 10.1089/3dp.2021.0279
-
- 3D Printable Thermoplastic Polyurethane Energy Efficient Passive Foot
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Muhammad Hassaan Ahmed, Asharib Jamshid, Usman Amjad, Aashir Azhar, Muhammad Zawar ul Hassan, Mohsin Islam Tiwana, Waqar Shahid Qureshi, Eisa Alanazi
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-05T08:00:00Z
DOI: 10.1089/3dp.2021.0022
-
- Heat Treatment Design for IN718 by Laser Metal Deposition with High
Deposition Rates: Modeling, Simulation, and Experiments-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chongliang Zhong, Venkatesh Pandian Narayana Samy, Norbert Pirch, Andres Gasser, Gandham Phanikumar, Johannes Henrich Schleifenbaum
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-05T08:00:00Z
DOI: 10.1089/3dp.2021.0115
-
- Influence of Auxiliary Process on Microstructure and Mechanical Properties
of Wire Arc Additive Manufacturing of Thick Wall Depositions-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wei Wu, Wei Xu, Jiaxiang Xue, Ping Yao
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-05T08:00:00Z
DOI: 10.1089/3dp.2021.0142
-
- Machine Learning-Based Operational State Recognition and Compressive
Property Prediction in Fused Filament Fabrication-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yongxiang Li, Guoning Xu, Wei Zhao, Tongcai Wang, Haochen Li, Yifei Liu, Gong Wang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-05T08:00:00Z
DOI: 10.1089/3dp.2021.0185
-
- Anomaly Detection in Fused Filament Fabrication Using Machine Learning
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Guo Dong Goh, Nur Muizzu Bin Hamzah, Wai Yee Yeong
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2022-01-05T08:00:00Z
DOI: 10.1089/3dp.2021.0231
-
- Is COVID-19 the “Catalyst” to Incorporate 3D Printing Technology into
the Manufacturing Industry'-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Maria Mavri, Vangelis Mennis
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-30T08:00:00Z
DOI: 10.1089/3dp.2021.0050
-
- Effective Mechanical Properties of AlSi7Mg Additively Manufactured Cubic
Lattice Structures-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Sara Mantovani, Mauro Giacalone, Andrea Merulla, Elena Bassoli, Silvio Defanti
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-30T08:00:00Z
DOI: 10.1089/3dp.2021.0176
-
- 3D Printing of Copper Using Water-Based Colloids and Reductive Sintering
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Lorenzo Airoldi, Riccardo Brucculeri, Primo Baldini, Francesco Pini, Barbara Vigani, Silvia Rossi, Ferdinando Auricchio, Umberto Anselmi-Tamburini, Simone Morganti
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-30T08:00:00Z
DOI: 10.1089/3dp.2021.0248
-
- Remodeling of Architected Mesenchymal Microtissues Generated on Mechanical
Metamaterials-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chenyan Wang, Zacharias Vangelatos, Tackla Winston, Shiyang Sun, Costas P. Grigoropoulos, Zhen Ma
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-29T08:00:00Z
DOI: 10.1089/3dp.2021.0091
-
- Ceramic 3D Printing via Dye-Sensitized Photopolymerization Under Green LED
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Gang Wang, Chuanzhe Ma, Tianyu Hu, Tao Wang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-28T08:00:00Z
DOI: 10.1089/3dp.2021.0204
-
- Optimizing Process Parameters of Direct Ink Writing for Dimensional
Accuracy of Printed Layers-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yongqiang Tu, Javier A. Arrieta-Escobar, Alaa Hassan, Uzair Khaleeq uz Zaman, Ali Siadat, Gongliu Yang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-28T08:00:00Z
DOI: 10.1089/3dp.2021.0208
-
- Microstructures and Electrochemical Dissolution Characteristics of
Additive-Manufactured Stainless Steel 304 on Different Sections at Low
Current Density-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chenhao Zhao, Ningsong Qu, Xiaochuan Tang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-28T08:00:00Z
DOI: 10.1089/3dp.2021.0214
-
- Selective Laser Melting of TiC-Fe via Laser Pulse Shaping: Microstructure
and Mechanical Properties-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Himanshu Singh Maurya, Lauri Kollo, Marek Tarraste, Kristjan Juhani, Fjodor Sergejev, Konda Gokuldoss Prashanth
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-28T08:00:00Z
DOI: 10.1089/3dp.2021.0221
-
- Efficiency Research of Conformal Channel Geometries Produced by Additive
Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive
Industry-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Cemal İrfan Çalışkan, Gökhan Özer, Ebubekir Koç, Umur Sezer Sarıtaş, Coşkun Fırat Yıldız, Övgü Yağız Çiçek
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-24T08:00:00Z
DOI: 10.1089/3dp.2021.0062
-
- Printing Ready Topology Optimization for Material Extrusion Polymer
Additive Manufacturing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Jingjing Yan, Zhiling Yuan, Qiang Liu, Guoliang Liu, Lei Li
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-24T08:00:00Z
DOI: 10.1089/3dp.2021.0189
-
- A Novel Approach of Customized Pelvic Implant Design Based on Symmetrical
Analysis and 3D Printing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yuan Chai, Xiao-Bo Chen, Jesse A. Estoque, Nick Birbilis, Qinghua Qin, Tomas Ward, Paul N. Smith, Rachel W. Li
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-23T08:00:00Z
DOI: 10.1089/3dp.2021.0121
-
- The Influence of Interface Design and External Frame on the Energy
Absorption Performance of the Semi-Auxetic Structure-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Xuexia Zhang, Pengfei Yan, Biao Yan
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-23T08:00:00Z
DOI: 10.1089/3dp.2021.0134
-
- Additive Manufacturing and Composite Materials for Marine Energy: Case of
Tidal Turbine-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Marwane Rouway, Mostapha Tarfaoui, Nabil Chakhchaoui, Lhaj El Hachemi Omari, Fouzia Fraija, Omar Cherkaoui
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-20T08:00:00Z
DOI: 10.1089/3dp.2021.0194
-
- Design and Validation of Additively Manufactured Injection Molds
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yannic Lay, Robin Roj, Martin Bonnet, Ralf Theiß, Peter Dültgen
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-17T08:00:00Z
DOI: 10.1089/3dp.2021.0132
-
- Multipart Build Effects on Temperature and Residual Stress by Laser Beam
Powder Bed Fusion Additive Manufacturing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Wenyou Zhang, Mingming Tong, Noel M. Harrison
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-17T08:00:00Z
DOI: 10.1089/3dp.2021.0143
-
- Closed-Loop Filament Feed Control in Fused Filament Fabrication
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Michele Moretti, Arianna Rossi
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-12-06T08:00:00Z
DOI: 10.1089/3dp.2021.0236
-
- Investigation of In Situ Vibration During Wire and Arc Additive
Manufacturing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chi Ma, Changlong Li, Yuhao Yan, Yonghong Liu, Xinlei Wu, Dege Li, Hui Jin, Fan Zhang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-26T08:00:00Z
DOI: 10.1089/3dp.2021.0053
-
- Effect of High Laser Energy Density on Selective Laser Melted 316L
Stainless Steel: Analysis on Metallurgical and Mechanical Properties and
Comparison with Wrought 316L Stainless Steel-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Pradeep Kumar Shanmuganathan, Dinesh Babu Purushothaman, Marimuthu Ponnusamy
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-26T08:00:00Z
DOI: 10.1089/3dp.2021.0061
-
- Bulk-Material Bond Strength Exists in Extrusion Additive Manufacturing for
a Wide Range of Temperatures, Speeds, and Layer Times-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Amirpasha Moetazedian, James Allum, Andrew Gleadall, Vadim V. Silberschmidt
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-26T08:00:00Z
DOI: 10.1089/3dp.2021.0112
-
- Finite Element Analysis and Computational Fluid Dynamics Verification of
Molten Pool Characteristics During Selective Laser Melting of Ti-6Al-4V
Plates-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Lv Du, Wu-Gui Jiang, Gao-Gui Xu, Qing-Hua Qin, Duo-Sheng Li
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-26T08:00:00Z
DOI: 10.1089/3dp.2021.0161
-
- Effect of Stabilizers and Thermoplastic Polyurethane on the Properties of
Three-Dimensional Printed Photochromic Wood Flour/Polylactic Acid
Composites-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Haiying Yang, Dong Wang, Hongjie Bi, Zechun Ren, Min Xu, Zhenhua Huang, Liping Cai
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-26T08:00:00Z
DOI: 10.1089/3dp.2021.0170
-
- Three-Dimensional Printed Subsurface Defect Detection by Active
Thermography Data-Processing Algorithm-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ézio Carvalho de Santana, Wellington Francisco da Silva, Marcella Grosso Lima, Gabriela Ribeiro Pereira, Douglas Bressan Riffel
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-26T08:00:00Z
DOI: 10.1089/3dp.2021.0172
-
- Effect of Particle Size and Shape on Wall Slip of Highly Filled Powder
Feedstocks for Material Extrusion and Powder Injection Molding-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Daniel Sanetrnik, Berenika Hausnerova, Martin Novak, Bhimasena Nagaraj Mukund
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-25T08:00:00Z
DOI: 10.1089/3dp.2021.0157
-
- Investigation and Improvement of Pushing Dislocation in Ceramsite Sand
Three-Dimensional Printing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Guili Gao, Zhimin Du, Weikun Zhang, Qingyi Liu, Yanqing Su, Yunqiang Ni, Dequan Shi
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-05T07:00:00Z
DOI: 10.1089/3dp.2021.0088
-
- Selective Laser Sintering of Polydimethylsiloxane Composites
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Jinzhi Wang, Shaojie Sun, Xue Li, Guoxia Fei, Zhanhua Wang, Hesheng Xia
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-05T07:00:00Z
DOI: 10.1089/3dp.2021.0105
-
- Selective Laser Sintering Parameter Optimization of Prosopis
Chilensis/Polyethersulfone Composite Fabricated by AFS-360 SLS-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Aboubaker I.B. Idriss, Jian Li, Yanling Guo, Tong Shuhui, Yangwei Wang, Elkhawad A. Elfaki, Gafer A. Ahmed
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-11-05T07:00:00Z
DOI: 10.1089/3dp.2021.0118
-
- Advances in Online Detection Technology for Laser Additive Manufacturing:
A Review-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Rui Li Zu, Dong Liang Wu, Jiang Fan Zhou, Zhan Wei Liu, Hui Min Xie, Sheng Liu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-22T07:00:00Z
DOI: 10.1089/3dp.2021.0049
-
- Effect of Process Parameters and Postprocessing on Mechanical Properties
of Additive Manufacturing Polylactic Acid Obtained by Fused Deposition
Modeling-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Fernando Rivera-López, María Hernández-Molina, Alejandro del Medico Bravo, Maria Milagros Laz Pavón
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-22T07:00:00Z
DOI: 10.1089/3dp.2021.0052
-
- Three-Dimensional Rock Core-Like Microstructure Fabricated by Additive
Manufacturing for Petroleum Engineering-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yi Mo, Xiaocong Chang, Zhongwei Yu, Daxing Sun, Dekai Zhou, Longqiu Li
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-22T07:00:00Z
DOI: 10.1089/3dp.2021.0135
-
- Microstructure and Biomechanical Properties in Selective Laser Melting of
Porous Metal Implants-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yabao Hu, Hanning Chen, Xiaodan Liang, Mo Jia, Jianbo Lei
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-22T07:00:00Z
DOI: 10.1089/3dp.2021.0150
-
- The Facile Three-Dimensional Printing of the Composite of Copper Nanosized
Powder and Micron Powder with Enhanced Properties-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Youzhi Zhou, Huijun He, Jingjie Xu, Minghui Liang, Limin Wang, Ligen Wang, Xu Pan, Qiang Hu, Jingguo Zhang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-11T07:00:00Z
DOI: 10.1089/3dp.2021.0122
-
- Printing Parameters of Fused Filament Fabrication Affect Key Properties of
Four-Dimensional Printed Shape-Memory Polymers-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Katy Pieri, Bailey M. Felix, Teng Zhang, Pranav Soman, James H. Henderson
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-08T07:00:00Z
DOI: 10.1089/3dp.2021.0072
-
- Immersion Ultrasonic Testing of Artificially Induced Defects in Fused
Filament Fabricated Steel 316L-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Solomon O. Obadimu, John McLaughlin, Kyriakos I. Kourousis
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-08T07:00:00Z
DOI: 10.1089/3dp.2021.0095
-
- A Feature-Specific Local Cooling System to Control Tensile Strength and
Dimensional Accuracy in Fused Filament Fabrication-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Kilian Maria Arthur Mueller, Sebastian Tobias Pammer, Stefan Leonhardt, Petra Mela
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-08T07:00:00Z
DOI: 10.1089/3dp.2021.0098
-
- Design, Preparation, and Mechanical Property Study of Polylactic
Acid/Ca2BO3Cl: Eu2+, Dy3+ Composite Material for 3D Printing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chaoqun He, Wei Zeng, Rui Kong, Jingling Gong, Wenjing Ma, Qi Tie, Miao Zhang, Quanmei Zhang, Xin Yi, Jie Guan
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-08T07:00:00Z
DOI: 10.1089/3dp.2021.0162
-
- Nonplanar 3D Printing of Bifurcating Forms
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ioanna Mitropoulou, Mathias Bernhard, Benjamin Dillenburger
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-05T07:00:00Z
DOI: 10.1089/3dp.2021.0023
-
- Teaching Designing for Additive Manufacturing: Formulating Educational
Interventions That Encourage Design Creativity-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Rohan Prabhu, Timothy W. Simpson, Scarlett R. Miller, Stephanie L. Cutler, Nicholas A. Meisel
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-10-04T07:00:00Z
DOI: 10.1089/3dp.2021.0087
-
- Design and Evaluation of Asphalt Concrete Incorporating Plastic Aggregates
Fabricated Using 3D Printing Technology-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Aamer Nazir, Min-Chih Liao, Yan-Wei Zhu, Usman Nazir
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-22T07:00:00Z
DOI: 10.1089/3dp.2020.0347
-
- Melt Electrospinning Writing of Mesh Implants for Pelvic Organ Prolapse
Repair-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Miguel Nuno Barbosa da Cunha, Rita Rynkevic, Maria Elisabete Teixeira da Silva, André Filipe Moreira da Silva Brandão, Jorge Lino Alves, António Augusto Fernandes
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-20T07:00:00Z
DOI: 10.1089/3dp.2021.0010
-
- A 5 + 1-Axis 3D Printing Platform for Producing Customized
Intestinal Fistula Stents-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Qingxi Hu, Jian Cui, Haiguang Zhang, Suihong Liu, Murugan Ramalingam
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-20T07:00:00Z
DOI: 10.1089/3dp.2021.0044
-
- Optimization of Selective Laser Sintering Process Parameters Based on PA12
Powders for Bone Tissue Scaffolds-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ran Yan, Changjiang Xie, Ze Zhao, Junchao Li
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-17T07:00:00Z
DOI: 10.1089/3dp.2021.0111
-
- Simulating and Predicting the Part Warping in Fused Deposition Modeling by
Thermal–Structural Coupling Analysis-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Guoguang Chen, Dashuang Wang, Weijian Hua, Weibin Wu, Wuyi Zhou, Yifei Jin, Wenxu Zheng
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-14T07:00:00Z
DOI: 10.1089/3dp.2021.0119
-
- Continuous Comprehensive Monitoring of Melt Pool Morphology Under
Realistic Printing Scenarios with Laser Powder Bed Fusion-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Chaitanya Krishna Prasad Vallabh, Xiayun Zhao
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-07T07:00:00Z
DOI: 10.1089/3dp.2021.0060
-
- Impact Printing
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Coralie Ming, Ammar Mirjan, Jesús Medina Ibáñez, Fabio Gramazio, Matthias Kohler
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-06T07:00:00Z
DOI: 10.1089/3dp.2021.0068
-
- Robotic Plaster Spraying: Crafting Surfaces with Adaptive Thin-Layer
Printing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Selen Ercan Jenny, Ena Lloret-Fritschi, David Jenny, Eliott Sounigo, Ping-Hsun Tsai, Fabio Gramazio, Matthias Kohler
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-27T07:00:00Z
DOI: 10.1089/3dp.2020.0355
-
- Binder Jetting of Custom Silicone Powder for Direct Three-Dimensional
Printing of Maxillofacial Prostheses-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yun Chang Lee, Jisi Zheng, Jonathan Kuo, Giovanny F. Acosta-Vélez, Chase S. Linsley, Benjamin M. Wu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-24T07:00:00Z
DOI: 10.1089/3dp.2021.0019
-
- Additive Timber Manufacturing: A Novel, Wood-Based Filament and Its
Additive Robotic Fabrication Techniques for Large-Scale,
Material-Efficient Construction-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Philipp Eversmann, Julian Ochs, Jannis Heise, Zuardin Akbar, Stefan Böhm
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-13T07:00:00Z
DOI: 10.1089/3dp.2020.0356
-
- Additive Manufacturing of Large Coreless Filament Wound Composite Elements
for Building Construction-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Serban Bodea, Pascal Mindermann, Götz T. Gresser, Achim Menges
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-11T07:00:00Z
DOI: 10.1089/3dp.2020.0346
-
- Benefits of 3D Printed and Customized Anatomical Footwear Insoles for
Plantar Pressure Distribution-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Sona Jandova, Radomir Mendricky
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-11T07:00:00Z
DOI: 10.1089/3dp.2021.0002
-
- Two-Dimensional Laser Melting of Lunar Regolith Simulant Using the
MOONRISE Payload on a Mobile Manipulator-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Stefan Linke, Anna Voß, Mathias Ernst, Patrick A. Taschner, Julian Baasch, Simon Stapperfend, Niklas Gerdes, Jürgen Koch, Peter Weßels, Jörg Neumann, Ludger Overmeyer, Enrico Stoll
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-02T07:00:00Z
DOI: 10.1089/3dp.2020.0323
-
- Additively Manufactured NdFeB Polyphenylene Sulfide Halbach Magnets to
Generate Variable Magnetic Fields for Neutron Reflectometry-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Tej Nath Lamichhane, Timothy R. Charlton, Brian Andrews, Devanshi Malaviya, Arjun K. Pathak, Haile Ambaye, Mathieu Doucet, Valeria Lauter, John Katsaras, Brian K. Post, Mariappan Parans Paranthaman
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-02T07:00:00Z
DOI: 10.1089/3dp.2020.0340
-
- Bibliometric Analysis-Based Review of Fused Deposition Modeling 3D
Printing Method (1994–2020)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Rishi Parvanda, Prateek Kala, Varun Sharma
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-02T07:00:00Z
DOI: 10.1089/3dp.2021.0046
-
- Effects of Different Orientation Angle, Size, Surface Roughness, and Heat
Curing on Mechanical Behavior of 3D Printed Cement Mortar With/Without
Glass Fiber in Powder-Based 3DP-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Pshtiwan Shakor, Shami Nejadi, Gavin Paul, Nadarajah Gowripalan
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-02T07:00:00Z
DOI: 10.1089/3dp.2021.0067
-
- Wear and Thermal Behavior of TiAlN Thin Films onto Ti6Al4V Alloy
Manufactured by Selective Laser Melting Method-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Gürkan Kaya, Tevfik Oğuzhan Ergüder, İlyas Hacısalihoğlu, Emre Mandev, Eyüphan Manay, Fatih Yıldız
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-08-02T07:00:00Z
DOI: 10.1089/3dp.2021.0081
-
- Rotation-Assisted Separation Model of Constrained-Surface
Stereolithography-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Min Hu, Haobo Cheng, Yunpeng Feng
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-28T07:00:00Z
DOI: 10.1089/3dp.2021.0001
-
- Development of 3D Printed Electrospun Scaffolds for the Fabrication of
Porous Scaffolds for Vascular Applications-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Jahnvi Bansal, Katelyn Neuman, Vaughn K. Greene, David A. Rubenstein
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-27T07:00:00Z
DOI: 10.1089/3dp.2020.0337
-
- Improved Sintering Quality and Mechanical Properties of Peanut Husk
Powder/Polyether Sulfone Composite for Selective Laser Sintering-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Aboubaker I.B. Idriss, Jian Li, Yanling Guo, Yangwei Wang, Elkhawad A. Elfaki, Elhaj A.I. Ahmed
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-26T07:00:00Z
DOI: 10.1089/3dp.2021.0036
-
- Electro-Osmotic Gripper Characterization for Layered Assembly
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Cheryl Perich, Robert MacCurdy, Ashley Macner, Joni Mici, Paul Steen, Hod Lipson
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2020.0224
-
- Toward Stimuli-Responsive Soft Robots with 3D Printed Self-Healing Konjac
Glucomannan Gels-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Krishna Manaswi Digumarti, Daniel Gosden, Nguyen Hao Le, Jonathan Rossiter
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2020.0289
-
- Wire Arc Additive Manufacturing Process for Topologically Optimized
Aeronautical Fixtures-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Fernando Veiga, Alfredo Suárez, Eider Aldalur, Igor Goenaga, Jaime Amondarain
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2021.0008
-
- Productivity Comparison Between Vat Polymerization and Fused Filament
Fabrication Methods for Additive Manufacturing of Polymers-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Dominik Muenks, Yordan Kyosev
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2021.0009
-
- Optimization of the Impact Attenuation Capability of Three-Dimensional
Printed Hip Protector Produced by Fused Deposition Modeling Using Response
Surface Methodology-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Suleiman Abimbola Yahaya, Zaidi Mohd Ripin, Mohamad Ikhwan Zaini Ridzwan
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2021.0014
-
- Fabrication of Temperature- and Humidity-Independent Silver Nanoparticle's
Carbon Composite-Based Strain Sensor Through Additive Manufacturing
Process-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Iqbal Nadeem, Sajid Memoon, Rahman Khalid, Amin Qausaria Tahseen, Muhammad Shakeel, Ahmad Salman, Amin Mohsin
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2021.0032
-
- 3D Printed Housing Devices for Segregated Compartmental Delivery of Oral
Fixed-Dose Anti-Tubercular Drugs Adopting Print and Fill Strategy-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Tushar Kanti Malakar, Vishal Sharad Chaudhari, Santosha Kumar Dwivedy, Upadhyayula Suryanarayana Murty, Subham Banerjee
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2021.0037
-
- Effect of Alloying Powders on Microstructure and Mechanical Properties of
Aluminum Alloy Arc Additive Manufacturing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Liwei Wang, Huan Hu, Tao Wu, Aiping Liu, Ziqin Wu, Qian Wang, Balaji Narayanaswamy, Zhimin Liang, Dianlong Wang, Guang Yang
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-12T07:00:00Z
DOI: 10.1089/3dp.2021.0055
-
- Multiresin Additive Manufacturing Process for Printing a Complete Denture
and an Analysis of Accuracy-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Cho-Pei Jiang, M. Fahrur Rozy Hentihu, Shyh-Yuan Lee, Richard Lin
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-07-07T07:00:00Z
DOI: 10.1089/3dp.2021.0007
-
- Chemical Polishing of Additively Manufactured, Porous, Nickel–Titanium
Skeletal Fixation Plates-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Agnieszka Chmielewska, Ahmadreza Jahadakbar, Bartłomiej Wysocki, Mohammad Elahinia, Wojciech Święszkowski, David Dean
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-06-25T07:00:00Z
DOI: 10.1089/3dp.2020.0209
-
- Applicability of Poly(styrene–butadiene–styrene) for Three-Dimensional
Printing of Tissue-Equivalent Samples-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Angelina Bulavskaya, Yury Cherepennikov, Boris Gavrikov, Anna Grigorieva, Evgeny Grigoriev, Irina Miloichikova, Sergei Stuchebrov
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-06-25T07:00:00Z
DOI: 10.1089/3dp.2021.0028
-
- 3D Printing of MgAl2O4 Spinel Mesh and Densification Through Pressure-Less
Sintering and Hot Isostatic Pressing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Aparna Adumbumkulath, Crystal Shin, Ghanashyam S. Acharya, Papiya Biswas, Mamatha Sirisala, Roy Johnson, Padmanabham Gade
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-06-14T07:00:00Z
DOI: 10.1089/3dp.2021.0034
-
- Fracture Toughness of Three-Dimensional Stereolithography Printed Polymer
Reinforced with Continuous Carbon Fibers-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Yue Lu, Xiao Xiao Han, Andrew Gleadall, Li-Guo Zhao
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-06-09T07:00:00Z
DOI: 10.1089/3dp.2020.0310
-
- Adaptable Method for Dynamic Planning of 3D Spatial Wireframes Extrusion
with Neural Networks and Robotic Automation-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Dan Luo, Weiguo Xu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-06-02T07:00:00Z
DOI: 10.1089/3dp.2020.0176
-
- Mechanical Properties of Thermoplastic Polyurethane-Based
Three-Dimensional-Printed Lattice Structures: Role of Build Orientation,
Loading Direction, and Filler-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Victor Beloshenko, Yan Beygelzimer, Vyacheslav Chishko, Bogdan Savchenko, Nadiya Sova, Dmytro Verbylo, Iurii Vozniak
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-05-14T07:00:00Z
DOI: 10.1089/3dp.2021.0031
-
- Optimization of Freeze-FRESH Methodology for 3D Printing of Microporous
Collagen Constructs-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Thais Sousa, Nilabh Kajave, Pengfei Dong, Linxia Gu, Stephanie Florczyk, Vipuil Kishore
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-05-12T07:00:00Z
DOI: 10.1089/3dp.2020.0311
-
- Evaluation of Different Root Canal Obturation Techniques in Internal Root
Resorption of Three-Dimensional Printed Teeth Manufactured Using Computer
Software-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Senem Yiğit Özer, Hicran Dönmez Özkan, İlayda Oyucu
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-05-06T07:00:00Z
DOI: 10.1089/3dp.2021.0012
-
- Structural Analysis of Voxel-Based Lattices Using 1D Approach
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Antonio Bacciaglia, Alessandro Ceruti, Alfredo Liverani
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-04-16T07:00:00Z
DOI: 10.1089/3dp.2020.0178
-
- Consumer Assessment of 3D-Printed Food Shape, Taste, and Fidelity Using
Chocolate and Marzipan Materials-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Stefania Chirico Scheele, Christina Hartmann, Michael Siegrist, Martin Binks, Paul F. Egan
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-04-16T07:00:00Z
DOI: 10.1089/3dp.2020.0271
-
- Roughness and Near-Surface Porosity of Unsupported Overhangs Produced by
High-Speed Laser Powder Bed Fusion-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Mfanufikile Shange, Ina Yadroitsava, Anton du Plessis, Igor Yadroitsev
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-04-12T07:00:00Z
DOI: 10.1089/3dp.2020.0097
-
- Three-Dimensional Printing of Double-Network Hydrogels: Recent Progress,
Challenges, and Future Outlook-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Puskal Kunwar, Mark James Ransbottom, Pranav Soman
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-03-22T07:00:00Z
DOI: 10.1089/3dp.2020.0239
-
- Microstructure and Properties of Al-6.0Mg-0.3Sc Alloy Deposited by
Double-Wire Arc Additive Manufacturing-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Lingling Ren, Huimin Gu, Wei Wang, Shuai Wang, Chengde Li, Zhenbiao Wang, Yuchun Zhai, Peihua Ma
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-02-04T08:00:00Z
DOI: 10.1089/3dp.2020.0039
-
- 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities,
Challenges, and Applications-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Andrei Jipa, Benjamin Dillenburger
First page: 84
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-27T07:00:00Z
DOI: 10.1089/3dp.2021.0024
-
- Additive Fabrication of Large-Scale Customizable Formwork Using Robotic
Fiber-Reinforced Polymer Winding-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Ya Ou, Ding-Wen Bao, Guan-Qi Zhu, Dan Luo
First page: 109
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-17T07:00:00Z
DOI: 10.1089/3dp.2020.0358
-
- Overcoming Environmental Stress Cracking of FDM 3D Printed Formwork for
Counter-Pressure Casting of Concrete-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Nicolas Ruffray, Lex Reiter, Robert Johann Flatt
First page: 122
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-09-14T07:00:00Z
DOI: 10.1089/3dp.2021.0006
-
- Temperature Analyses in Fused Filament Fabrication: From Filament Entering
the Hot-End to the Printed Parts-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Authors: Jie Zhang, Egle Vasiliauskaite, Alec De Kuyper, Cédric De Schryver, Frederik Vogeler, Frederik Desplentere, Eleonora Ferraris
First page: 132
Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.
Citation: 3D Printing and Additive Manufacturing
PubDate: 2021-06-16T07:00:00Z
DOI: 10.1089/3dp.2020.0339
-
