JournalTOCs

VLSI Design
Journal Prestige (SJR): 0.115

Citation Impact (citeScore): 1
Number of Followers: 19

This is an Open Access Journal

Open Access journal
ISSN (Print) 1065-514X - ISSN (Online) 1563-5171
Published by Hindawi

[339 journals]

A Novel Net Weighting Algorithm for Power and Timing-Driven Placement
- Abstract: Nowadays, many new low power ASICs applications have emerged. This new market trend made the designer’s task of meeting the timing and routability requirements within the power budget more challenging. One of the major sources of power consumption in modern integrated circuits (ICs) is the Interconnect. In this paper, we present a novel Power and Timing-Driven global Placement (PTDP) algorithm. Its principle is to wrap a commercial timing-driven placer with a nets weighting mechanism to calculate the nets weights based on their timing and power consumption. The new calculated weight is used to drive the placement engine to place the cells connected by the critical power or timing nets close to each other and hence reduce the parasitic capacitances of the interconnects and, by consequence, improve the timing and power consumption of the design. This approach not only improves the design power consumption but facilitates also the routability with only a minor impact on the timing closure of a few designs. The experiments carried on 40 industrial designs of different nodes, sizes, and complexities and demonstrate that the proposed algorithm is able to achieve significant improvements on Quality of Results (QoR) compared with a commercial timing driven placement flow. We effectively reduce the interconnect power by an average of 11.5% that leads to a total power improvement of 5.4%, a timing improvement of 9.4%, 13.7%, and of 3.2% in Worst Negative Slack (WNS), Total Negative Slack (TNS), and total wirelength reduction, respectively.
  PubDate: Thu, 18 Oct 2018 00:00:00 +000
Crypto-Stego-Real-Time (CSRT) System for Secure Reversible Data Hiding
- Abstract: Due to demand of information transfer through higher speed wireless communication network, it is time to think about security of important information to be transferred. Further, as these communication networks are part of open channel, to preserve the security of any Critical Information (CI) is really a challenging task in any real-time application. Data hiding techniques give more security and robustness of important CI against encryption or cryptographic software solutions. However, hardwired approach exhibits better solution not only in terms of reduction of complexity but also in terms of adaptive real-time output. This paper demonstrates frequency, Discrete Cosine Transform (DCT) domain Steganographic data hiding hardware solution for secret communication called Crypto-Stego-Real-Time (CSRT) System. The challenge is to design a secure algorithm keeping reliability of minimum distortion of original cover signal while embedding considerable amount of CI. Field Programmable Gate Array (FPGA) implementation shown in this paper is more secure, robust, and fast. Pipelining process while embedding enhances the speed of embedding, optimizes the memory utilization, and gives better Peak Signal to Noise Ratio (PSNR) and high robustness. Practically implemented hardware Steganographic solutions shown in this paper also give better performance than that of the current state-of-the-art hardware implementations.
  PubDate: Thu, 27 Sep 2018 07:51:00 +000
High Data Rate FinFET On-Off Keying Transmitter for Wireless Capsule
Endoscopy
- Abstract: Wireless capsule endoscopy (WCE) is a painless diagnostic tool used by the physicians for endoscopic examination of the gastrointestinal track. The performance of the existing WCE systems is limited by high power consumption and low data rate transmission. In this paper, a 144 MHz FinFET On-Off Keying (OOK) transmitter is designed and integrated with a class-E power amplifier. It is implemented and simulated using 16 nm FinFET Predictive Technology Models. The proposed transmitter can achieve the data rate of 33 Mbps with average power consumption of 1.04 mW from a 0.85 V power supply in the simulation. This design outperforms the current state-of-the-art designs.
  PubDate: Thu, 31 May 2018 11:36:59 +000
Novel Verification Method for Timing Optimization Based on DPSO
- Abstract: Timing optimization for logic circuits is one of the key steps in logic synthesis. Extant research data are mainly proposed based on various intelligence algorithms. Hence, they are neither comparable with timing optimization data collected by the mainstream electronic design automation (EDA) tool nor able to verify the superiority of intelligence algorithms to the EDA tool in terms of optimization ability. To address these shortcomings, a novel verification method is proposed in this study. First, a discrete particle swarm optimization (DPSO) algorithm was applied to optimize the timing of the mixed polarity Reed-Muller (MPRM) logic circuit. Second, the Design Compiler (DC) algorithm was used to optimize the timing of the same MPRM logic circuit through special settings and constraints. Finally, the timing optimization results of the two algorithms were compared based on MCNC benchmark circuits. The timing optimization results obtained using DPSO are compared with those obtained from DC, and DPSO demonstrates an average reduction of 9.7% in the timing delays of critical paths for a number of MCNC benchmark circuits. The proposed verification method directly ascertains whether the intelligence algorithm has a better timing optimization ability than DC.
  PubDate: Wed, 21 Mar 2018 07:28:38 +000
Carbon Nanotubes-Based Digitally Programmable Current Follower
- Abstract: The physical constraints of ever-shrinking CMOS transistors are rapidly approaching atomistic and quantum mechanical limits. Therefore, research is now directed towards the development of nanoscale devices that could work efficiently in the sub-10 nm regime. This coupled with the fact that recent design trend for analog signal processing applications is moving towards current-mode circuits which offer lower voltage swings, higher bandwidth, and better signal linearity is the motivation for this work. A digitally controlled DVCC has been realized using CNFETs. This work exploited the CNFET’s parameters like chirality, pitch, and numbers of CNTs to perform the digital control operation. The circuit has minimum number of transistors and can control the output current digitally. A similar CMOS circuit with 32 nm CMOS parameters was also simulated and compared. The result shows that CMOS-based circuit requires 418.6 μW while CNFET-based circuit consumes 352.1 μW only. Further, the proposed circuit is used to realize a CNFET-based instrumentation amplifier with digitally programmable gain. The amplifier has a CMRR of 100 dB and ICMR equal to 0.806 V. The 3 dB bandwidth of the amplifier is 11.78 GHz which is suitable for the applications like navigation, radar instrumentation, and high-frequency signal amplification and conditioning.
  PubDate: Wed, 17 Jan 2018 07:14:13 +000
First Steps in Creating Online Testable Reversible Sequential Circuits
- Abstract: Synthesis of reversible sequential circuits is a very new research area. It has been shown that such circuits can be implemented using quantum dot cellular automata. Other work has used traditional designs for sequential circuits and replaced the flip-flops and the gates with their reversible counterparts. Our earlier work uses a direct feedback method without any flip-flops, improving upon the replacement technique in both quantum cost and ancilla inputs. We present here a further improved version of the direct feedback method. Design examples show that the proposed method produces better results than our earlier method in terms of both quantum cost and ancilla inputs. We also propose the first technique for online testing of single line faults in sequential reversible circuits.
  PubDate: Sun, 14 Jan 2018 00:00:00 +000
Efficient Nonrecursive Bit-Parallel Karatsuba Multiplier for a Special
Class of Trinomials
- Abstract: Recently, we present a novel Mastrovito form of nonrecursive Karatsuba multiplier for all trinomials. Specifically, we found that related Mastrovito matrix is very simple for equally spaced trinomial (EST) combined with classic Karatsuba algorithm (KA), which leads to a highly efficient Karatsuba multiplier. In this paper, we consider a new special class of irreducible trinomial, namely, . Based on a three-term KA and shifted polynomial basis (SPB), a novel bit-parallel multiplier is derived with better space and time complexity. As a main contribution, the proposed multiplier costs about circuit gates of the fastest multipliers, while its time delay matches our former result. To the best of our knowledge, this is the first time that the space complexity bound is reached without increasing the gate delay.
  PubDate: Thu, 11 Jan 2018 00:00:00 +000