Similar Journals
|
Swiss Journal of Geosciences
Journal Prestige (SJR): 0.741  Citation Impact (citeScore): 2 Number of Followers: 1  Hybrid journal (It can contain Open Access articles)ISSN (Print) 1661-8734 - ISSN (Online) 1661-8726 Published by Springer-Verlag  [2467 journals]
|
- Schistes Lustrés in a hyper-extended continental margin setting and
reinterpretation of the limit between the Mont Fort and Tsaté nappes
(Middle and Upper Penninics, Western Swiss Alps)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The Schistes Lustrés form a large and complex unit at the top of the Penninic nappe stack of the Alpine belt. Calcschists, partly of Late Cretaceous age, constitute the dominant lithology. They are closely associated both with blueschist facies Piemont-Ligurian ophiolites and continent-derived Mesozoic metasediments. The question of whether the Schistes Lustrés originated on continental or oceanic crust has been extensively debated among Alpine geologists and is locally still controversial. We present here new structural and stratigraphic observations, as well as Raman graphite thermometry (RSCM) data, for the Schistes Lustrés complex of the Combin zone in the Hérens, Dix and Bagnes valleys. Our observations indicate that the basal part of this Schistes Lustrés complex (defined as the Série Rousse) is systematically devoid of ophiolitic material, and rests in stratigraphic contact on the underlying Triassic - Lower Cretaceous metasediments and Paleozoic basement of the Mont Fort nappe (Prepiemont paleogeographic domain). The unconformity at the base of the Schistes Lustrés complex is interpreted as resulting from the sedimentation of the Série Rousse on a paleorelief formed by remnants of Jurassic normal fault scarps, and not as an Alpine tectonic contact, as previously proposed. The lithostratigraphic comparison with the Breccia nappe in the Prealps, as well as a foraminifer discovery, allows us to better constrain the age of the Série Rousse. It extends from the middle of the Early Cretaceous (Aptian') to the Late Cretaceous (Campanian to earliest Maastrichtian'). In contrast, the upper contact of the Série Rousse with the ophiolite-bearing Schistes Lustrés clearly corresponds to an Alpine thrust. The thrust zone is underlined by thin and discontinuous slices of highly strained continental-margin derived Mesozoic metasediments (Frilihorn slices). RSCM data show that the recrystallization of the organic matter progressively increases on both sides towards this contact. This contact, internal to the Schistes Lustrés complex, is reinterpreted as the major tectonic contact separating the Middle Penninic Mont Fort nappe from the Upper Penninic Tsaté nappe (defined here as including only the ophiolite-bearing Schistes Lustrés and associated meta(ultra-)basites). This study clearly documents that the Schistes Lustrés consist of sediments either deposited on oceanic crust, showing locally preserved stratigraphic contacts with ophiolitic or serpentinized sub-continental mantle slivers, or sediments still resting stratigraphically on a former hyper-extended continental margin.
PubDate: 2023-03-20
-
- Record of a dense succession of drowning phases in the Alpstein mountains,
northeastern Switzerland: Part II—the Lower Cretaceous Schrattenkalk
Formation (late Barremian)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The Schrattenkalk Formation represents a complete succession of Lower Cretaceous shallow-water carbonate platform series cropping out in the Alpstein massif of north-eastern Switzerland. The Schrattenkalk Formation is traditionally divided into two sedimentary units, the “Lower” and the “Upper” Schrattenkalk, separated by the more marly Rawil Member. The “Lower” Schrattenkalk is habitually dated to the late Barremian, while the Rawil Member and the “Upper” Schrattenkalk are dated to the early Aptian. New field observations, however, call the lithostratigraphic dichotomy of the Schrattenkalk into question, as the neritic carbonates are disrupted by several key surfaces associated with karstic episodes and/or transgressive sediments, corresponding to ammonite-rich hemipelagic deposits on the distal shelf. A large number of ammonites were collected in the Drusberg Member as well as rare ammonites from the Schrattenkalk Formation. These ammonites as well as the neritic macrofauna from the Schrattenkalk Formation allow a precise dating of the onset of the Schrattenkalk Formation across the Alpstein massif and its successive phases of progradation. Three successive carbonate bodies and a fourth sedimentary intermediate rock body at the top of the Schrattenkalk platform are defined, based on new biostratigraphic data and updated interpretations of the sequence stratigraphy and geochemical data. The data shows a progressive onset of the Schrattenkalk carbonate platform along the studied transect, following a SE progradation over time. The oldest deposits refer to the upper Barremian T. vandenheckii Zone and the youngest carbonates to the uppermost Barremian M. sarasini Subzone. The new dating of the discontinuity surfaces and key-beds highlight three successive flooding events. The first drowning phase, which correlates with the "Sartousiana" event, dates from the middle late Barremian (upper T. vandenheckii—lower G. sartousiana Zone). The second phase, represented by the Rawil Member, is an incipient drowning, which seems to coincide with the latest Barremian Taxy event (usually reported to the I. giraudi and lowermost M. sarasini zones) according to rare ammonite discoveries. The final demise of the Schrattenkalk platform, situated close to the Barremian-Aptian boundary, is related to an exposure and consecutive drowning event.
PubDate: 2023-01-24
-
- Juliana Troch receives the 2022 Paul Niggli Medal
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
PubDate: 2022-12-30
DOI: 10.1186/s00015-022-00428-7
-
- Rift-related paleogeography of the European margin in the Eastern Alps
(Central Tauern Window)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract Continent-derived tectonic units in the Tauern Window of the Alps exhibit stratigraphic and structural traces of extension of continental margins eventually leading to the opening of the Alpine Tethys. In this study, we reassess lithostratigraphic data from the central part of the Tauern Window to reconstruct the post-Variscan evolution of this area, particularly the rift-related geometry of the European continental margin. The lithostratigraphy of the Alpine nappes reflects systematic variations of the structure of the European margin. The lowest tectonic units (Venediger nappe system, Eclogite Zone and Trögereck Nappe) are characterized by a thick succession of arkose-rich Bündnerschiefer-type sediments of probably Early Cretaceous age that we interpret as syn-rift sequence and which stratigraphically overlies thinned continental basement and thin pre-rift sediments. In contrast, the highest tectonic unit derived from Europe (Rote Wand Nappe) preserves a thick pre-rift sedimentary sequence overlying thinned continental basement, as well as a thick syn- to post-rift succession characterized by turbiditic Bündnerschiefer-type sediments of probable Cretaceous age. These observations point towards a highly segmented structure of the European rifted margin. We propose that this involved the formation of an outer margin high, partly preserved in the Rote Wand Nappe, that was separated from the main part of the European margin by a rift basin overlying strongly-thinned continental crust. The along-strike discontinuity of the Rote Wand Nappe is proposed to reflect the lateral variation in thickness of the outer margin high that resulted from margin-parallel segmentation of the European continental crust during highly oblique rifting antecedent to the opening of Alpine Tethys.
PubDate: 2022-12-29
DOI: 10.1186/s00015-022-00426-9
-
- Influence of rheologically weak layers on fault architecture: insights
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract We present a series of analogue models inspired by the geology of the Zürcher Weinland region in the Northern Alpine Foreland Basin of Switzerland to explore the influence of rheological weak, i.e. (partially) ductile layers on the 3D evolution of tectonic deformation. Our model series test the impact of varying weak layer thickness and rheology, as well as different kinematics of an underlying “basal fault”. Model analysis focuses on deformation in the weak layer overburden and, uniquely, within the weak layer itself. We find that for low to moderate basal fault displacements, the above-mentioned parameters strongly influence the degree of coupling between the basal fault and the weak layer overburden. Coupling between the basal fault and overburden decreases by reducing the strength of the weak layer, or by increasing the weak layer’s thickness. As a result, basal fault displacement is less readily transferred through the weak layer, leading to a different structural style in the overburden. By contrast, increasing the amount, or rate, of basal fault slip enhances coupling and leads to a more similar structural style between basal fault and overburden. Moreover, dip-slip displacement on the basal fault is more readily transferred to the overburden than strike-slip displacement of the same magnitude. Our model results compare fairly well to natural examples in the Northern Alpine Foreland Basin, explaining various structural features. These comparisons suggest that rheological weak layers such as the Jurassic Opalinus Clay have exerted a stronger control on fault zone architecture than is commonly inferred, potentially resulting in vertical fault segmentation and variations in structural style. Furthermore, the novel addition of internal marker intervals to the weak layer in our models reveals how complex viscous flow within these layers can accommodate basal fault slip. Our model results demonstrate the complex links between fault kinematics, mechanics and 3D geometries, and can be used for interpreting structures in the Alpine Foreland, as well as in other settings with similar weak layers and basal faults driving deformation in the system.
PubDate: 2022-12-16
DOI: 10.1186/s00015-022-00427-8
-
- Marine facies differentiation along complex paleotopography: an example
from the Middle Miocene (Serravallian) of Lower Austria-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract In the area of Bad Deutsch-Altenburg (Hainburg Mountains, Lower Austria) a Middle Miocene transgression over Mesozoic basement was explored in the course of the Danube power plant project “Hainburg”. The Mesozoic basement forms a narrow ridge dipping to the northeast towards the Vienna Basin, covered by various Miocene sediments. The ridge represents a specific paleotopography that required a detailed study with 78 shallow, fully cored drill holes in an area of c. 0.5 km2. Ten drillings were selected for this study based on sedimentary composition and position relative to the Mesozoic ridge. These 10 cores, ranging in drilling depth from 26.5 to 96.4 m, were studied in respect to sedimentology, corallinacean algae, calcareous nannoplankton, foraminifers and ostracodes to reconstruct sediment distribution and paleoenvironment. Sediment distribution clearly shows that the Mesozoic ridge formed a physical barrier with siliciclastics dominating in the SW of the ridge and carbonate sediments prevailing in the NE. Based on biostratigraphy (calcareous nannoplankton, foraminifera, ostracodes, dinoflagellates) the majority of the sediments can be dated to the late Badenian (early Serravallian) only in some drillholes lower Sarmatian (upper Serravallian) sediments were detected. In terms of sequence stratigraphy, the Badenian sediments represent the transgressive and highstand systems tract of 3rd order sequence TB 2.5 (bound by the lowstands Ser 2 and Ser 3), the lower Sarmatian sediments can be correlated to sequence TB 2.6. Carbonate sediments show a wide spectrum of 13 facies which are mostly dominated by coralline algae. According to the relative positions of the drill holes a water depth between 0 and about 50 m can be reconstructed what is supported by the occurrence of the benthic biota. This biota indicates that the sedimentary succession started from the very beginning under full marine conditions. Except of basal conglomerates/breccias water energy conditions were low and turbidity high. Close to the Sarmatian boundary a reduction in salinity and depth may have occurred which is also observed in the Sarmatian sediments. Carbonate sediments and, in particular, larger benthic foraminifers indicate tropical to warm-temperate conditions for the late Badenian of the studied sections. The siliciclastic sediments NW of the Mesozoic ridge reflect riverine input indicated by the occurrence of freshwater ostracodes and characean oogonias. Calcareous nannoplankton and dinoflagellates show a high share of reworking from Upper Cretaceaous and Paleogene sediments.
PubDate: 2022-12-12
DOI: 10.1186/s00015-022-00425-w
-
- The Flims rock avalanche: structure and consequences
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The Flims rock avalanche has a gliding surface that cuts down section in a limestone sequence and does not follow a weak horizon. The gliding surface is parallel to bedding and/or to the penetrative Alpine foliation in the limestone that is characterized by a shape-preferred orientation of calcite grains. Predisposition was governed by structural weaknesses in form of sub-vertical fault zones within solid limestone. Faults controlled the orientation of lateral scarps of the rock avalanche. The main body of the rock avalanche behaved as semi-coherent mass, which preserved the original overall structure. The internal deformation occurred by dynamic fragmentation, which was distributed rather heterogeneously. Fragmentation starts by the formation of veins consisting of comminuted limestone. In a later stage crosscutting veins coalesce to form a texture with entirely comminuted limestone (“rock flour”) containing angular shattered fragments of limestone of variable sizes. The involvment of the post-glacial water-saturated substrate contributed to the long-runout of the Flims rock avalanche. The substrate was plowed bulldozer-wise at the front of the rock avalanche and escaped upward through the moving rock avalanche as clastic dikes and blow-out pipes. Bulldozing raised the valley floor in front of the rock avalanche by more than 100 m and, on the margins, entrained pieces of the valley flank and the neighboring, older Tamins rock avalanche deposit. The liquefied substrate breached the Tamins rock avalanche at Reichenau and entrained fragments thereof down the valley. The fragments now form the famous tumas of Domat/Ems, Felsberg and Chur. Lake Ilanz, dammed the by Flims rock avalanche, experienced a first major outburst shortly after its formation.
PubDate: 2022-11-28
DOI: 10.1186/s00015-022-00424-x
-
- Thermal evolution of a Variscan syn-orogenic intracontinental basin
(Servoz basin, Western Alps): RSCM geothermometry and geochronology-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The Variscan basement of the Aiguilles-Rouges massif (Western Alps) exposes the Servoz syncline which consists of a metavolcano-sedimentary sequence composed of (i) a volcanic unit of unknown age and origin, (ii) Early Carboniferous sedimentary series affected by the Variscan orogeny and intruded by the Montées-Pélissier pluton, and (iii) a Late Carboniferous late-orogenic sedimentary sequence. We combined field investigations, Raman Spectroscopy on Carbonaceous Material geothermometry, and LA-ICPMS U-Th-Pb geochronology on zircon in order to reappraise the sedimentary sequence of the Servoz syncline. Our results allow us to identify three distinct sedimentary formations (F1, F2 and F3). The F1 formation is composed of metagreywackes, bimodal volcanic and magmatic rocks formed during basin opening at an early rifting stage (370–350 Ma) within a back-arc geodynamic setting. This extensional regime was responsible for a high thermal event recorded by a ca. 115 °C/km apparent geothermal gradient. Local anatexis of the basement rocks under the basin is dated at 351 ± 5 Ma. Basin inversion occurred between 350 and 330 Ma in response to oblique collision, with the development of large-scale dextral shear zones and syn-kinematic 340–330 Ma granite intrusions. Subsequent dextral transtension was responsible for the opening of a pull-apart basin between ca. 330 and 310 Ma with the deposition of the F2 phyllite formation that was later deformed by the ongoing dextral transcurrent Variscan tectonics at temperatures between 200 and 350 °C. Finally, the F3 terrigenous sedimentary rocks deposited at ca. 310–290 Ma in a late-orogenic extensional basin. The Alpine-related tectonic event overprinted all the temperatures below 350 °C. Although similar basins have been recognized in other External Crystalline Massifs of the Alps, the Servoz syncline is the first example that allows a major part of the polyphase tectonic evolution, since the early stages of the Devonian, to be recognized. Comparison with similar back-arc basins from the French Central massif, the Vosges massif and the Bohemian massif suggests that the External Crystalline Massifs initially belonged to the Moldanubian hinterlands of the Variscan belt.
PubDate: 2022-11-24
DOI: 10.1186/s00015-022-00423-y
-
- A gravimetric assessment of the Gotthard Base Tunnel geological model:
insights from a novel gravity terrain-adaptation correction and rock
physics data-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The Gotthard Base Tunnel (GBT) is a 57 km long railway tunnel, constructed in the Central Alps in Switzerland and extending mainly North–South across numerous geological units. We acquired 80 new gravity data points at the surface along the GBT profile and used 77 gravity measurements in the tunnel to test and constrain the shallow crustal, km-scale geological model established during the tunnel construction. To this end, we developed a novel processing scheme, which computes a fully 3D, density-dependent gravity terrain-adaptation correction (TAC), to consistently compare the gravity observations with the 2D geological model structure; the latter converted into a density model. This approach allowed to explore and quantify candidate rock density distributions along the GBT modelled profile in a computationally-efficient manner, and to test whether a reasonable fit can be found without structural modification of the geological model. The tested density data for the various lithologies were compiled from the SAPHYR rock physical property database. The tested models were evaluated both in terms of misfit between observed and synthetic gravity data, and also in terms of correlation between misfit trend and topography of the target profile. The results indicate that the locally sampled densities provide a better fit to the data for the considered lithologies, rather than density data averaged over a wider set of Alpine rock samples for the same lithology. Furthermore, using one homogeneous and constant density value for all the topographic corrections does not provide an optimal fit to the data, which instead confirms density variations along the profile. Structurally, a satisfactory fit could be found without modifying the 2D geological model, which thus can be considered gravimetry-proof. From a more general perspective, the gravity data processing routines and the density-dependent corrections developed in this case study represent a remarkable potential for further high-resolution gravity investigations of geological structures.
PubDate: 2022-11-11
DOI: 10.1186/s00015-022-00422-z
-
- Record of a dense succession of drowning phases in the Alpstein mountains,
north-eastern Switzerland: part I—the Lower Cretaceous Tierwis Formation
(latest Hauterivian to latest Barremian)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract In the Alpstein massif of north-eastern Switzerland, a complete succession of uppermost Hauterivian to uppermost Barremian condensed hemipelagic sediments crops out. This succession is known as Tierwis Formation, comprising in ascending order, the Altmann and Drusberg members. The sedimentary succession bears a number of fossiliferous glauconite- or phosphate-rich beds. A large number of newly discovered ammonites from these key beds and from several poorly explored levels of the Tierwis Formation allows for a new age calibration. The new dating as well as revised sequence stratigraphic interpretations and geochemistry contribute to a better understanding of the lithostratigraphic complexity of the Tierwis Formation and its spatio-temporal relationship with the Schrattenkalk Formation. The new lithostratigraphic observations, backed by ammonites, shows that the Altmann type-section and the Tierwis paratype-section do not cover the same stratigraphic interval because of dynamic sedimentation processes as erosion and sedimentation in submarine channels. We suggest that a phosphatic conglomerate in the Dursberg Member of middle late Barremian age corresponds to the Chopf Bed, which we recognised for the first time in the Alsptein massif. The Drusberg Member strongly thickens toward the southeast and progressively covers an upward extended stratigraphic range. Furthermore, the new dating of the key-surfaces and beds highlight a dense succession of drowning phases which occurred through the latest Hauterivian to late Barremian time interval. The latest Hauterivian onset of the glauconite-rich sedimentation of the Altmann Member is associated with a first major drowning phase, followed by the Faraoni oceanic anoxic event. The change of sedimentation to a rhythmic marl-limestone alternation of the Drusberg Member takes place over a polyzonal phosphatic conglomerate. This conglomerate coincides with a second major drowning phase and the onset of the Mid-Barremian Event, which is calibrated on the Tethyan ammonite biozonation.
PubDate: 2022-08-22
DOI: 10.1186/s00015-022-00421-0
-
- Reassessing the intrusive tempo and magma genesis of the late Variscan Aar
batholith: U–Pb geochronology, trace element and initial Hf isotope
composition of zircon-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The Variscan orogeny was responsible for the formation of a significant volume of igneous basement throughout present-day Europe. Detailed understanding of these rocks has, however, been obfuscated by significant overprinting during younger geologic events. In order to better understand the formation of this basement, we present U–Pb dates, trace element concentrations and Hf isotope compositions of zircon from 17 intrusions of the Variscan Aar batholith, located in the Aar Massif, Central Alps, Switzerland. Laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) was used to generate a large set of U–Pb dates, trace element and Hf isotope compositions on untreated zircon, as well as zircon pretreated by chemical abrasion. Furthermore, a subset of samples was also analyzed for high-precision U–Pb geochronology using chemical abrasion, isotope dilution, thermal ionization mass spectrometry (CA-ID-TIMS). The U–Pb dates of both dating techniques are significantly dispersed, indicating that they are influenced by multiple forms of complexity, including inheritance, domains of secondary alteration likely related to Alpine overprint or growth, decay damage related Pb-loss, and potentially protracted magmatic growth. Decay-damage related Pb-loss is likely a subordinate source of age scatter within the data, therefore chemical abrasion pretreatment is not capable of completely mitigating the observed analytical scatter. After rejection of outliers, the remaining data still exhibit excess scatter of several percent among 206Pb/238U dates in individual samples, however it is possible to interpret reasonable geologic ages from these data. These new U–Pb zircon age interpretations indicate the Aar batholith grew incrementally through four major magmatic pulses, which occurred at approximately 348, 333, 309 and 298 Ma. Based on the trace element and Hf isotope geochemistry, the melt source(s) of the Aar batholith evolved throughout the duration of batholith formation and growth. The transitioning from (i) melting of depleted mantle at 348 Ma during a stage of active continental arc magmatism (εHf = + 12 to + 10), (ii) melting of metasomatically enriched lithospheric mantle, possibly contaminated by crust during the 333 Ma pulse (εHf = − 10 to − 3), followed by (iii) an increasing incorporation of a juvenile mantle components during the 309 and 298 Ma pulses (εHf = − 3 to + 6). Finally, these new U–Pb ages yield a more detailed understanding of the Variscan Aar batholith by integrating the new detailed mapping of Aar Massif for the Geological Atlas of Switzerland, allowing for more accurate characterization and categorization of variably deformed heterogeneous intrusive bodies.
PubDate: 2022-07-18
DOI: 10.1186/s00015-022-00420-1
-
- The Maira-Sampeyre and Val Grana Allochthons (south Western Alps): review
and new data on the tectonometamorphic evolution of the Briançonnais
distal margin-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract Here we describe the structure, the high-pressure, low-temperature (HP-LT) metamorphism and tectonic evolution of the Briançonnais distal margin units from the south Western Alps. The studied area extends southwest of the Dora-Maira (U)HP basement units and east-southeast of the classical Briançonnais nappes. A new structural map accompanied by geological profiles shows the thrusting of the oceanic nappes (Monviso and Queyras units) onto the distal Briançonnais units (D1 and D2 late Eocene deformation phases) under blueschist-facies conditions. Subsequent deformation during the Early Oligocene (D3 deformation phase) took place under greenschist-facies conditions and was associated with back-folding and -thrusting in the units overlying the Dora-Maira massif and with exhumation related to normal reactivation of former thrusts within the latter massif. Two large cover units, detached from their former distal Briançonnais basement, are redefined as the Maira-Sampeyre and Val Grana Allochthons (shortly: Maira-Grana Allochthons = MGA) including, (i) the Val Maira-Sampeyre unit involving Lower and Middle Triassic formations, seemingly detached from the Dora-Maira units during the subduction process, and (ii) the Val Grana unit with Middle-Upper Triassic and Early-Middle Jurassic formations, which was probably detached from the Maira-Sampeyre unit and correlates with the “Prepiemonte units” known from the Ligurian Alps to the Swiss Prealps. Three major shear zones involving tectonic mélanges of oceanic and continental rocks at the base of the Val Grana, Maira-Sampeyre and Dronero units testify to an early phase of exhumation within the subduction channel in front of the Adria plate. We present a new metamorphic map based on published and new petrological data, including new thermometric data obtained by Raman spectroscopy of carbonaceous material (RSCM). The TRSCM values range from ~ 400 °C to > 500 °C, going from the most external Val Grana unit and overlying Queyras schists to the uppermost Dora-Maira unit. During the Late Triassic, the width of the Briançonnais s.l. domain can be restored at ~ 100 km, whereas it reached ~ 150 km after the Jurassic rifting. A significant, second rifting event affected the Briançonnais domain during the Late Cretaceous-Paleocene, forming the Longet-Alpet chaotic breccias, which deserve further investigations.
PubDate: 2022-06-07
DOI: 10.1186/s00015-022-00419-8
-
- Coupling length: a generalized gleno-acetabular distance measurement for
interpreting the size and gait of quadrupedal trackmakers-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The gleno-acetabular distance DGA, a conventional proxy for the size of a quadrupedal trackmaker, is often estimated as the distance GA between the midpoint between a left and right pair of pes tracks and the midpoint between a selected pair of left and right manus tracks. While frequently used to estimate trackmaker size from fossil trackways, the relationship between GA and DGA depends upon the gait (which is unknown for extinct trackmakers), and is subject to multiple additional sources of uncertainty including which specific pair of manus tracks to associate with a given pair of pes tracks. Here a generalization is introduced, termed coupling length, which does not require any presumption about trackmaker gait of the degree of overstepping. On the contrary, a systematic analysis of a trackway in terms of coupling length can permit estimation of both the size and the gait with which the trackmaker progressed. Coupling length can be computed at successive points along a trackway, allowing exploration of a range of hypothetical gaits and body sizes for the trackmaker responsible. A fitness function quantifying persistent variation in coupling length along a trackway is used to indicate whether a given trackway could have been created by a fairly consistent gait, and if so, a range of high-fitness solution gaits and their associated DGA. The method was applied to selected quasi-regular sauropod trackways and a solution found for a narrow range of gaits with limb phase of about 0.3 and DGA = 1.6 ± 0.2 m. This is the first estimation of sauropod trackmaker gait, and introduces a novel method by which irregularity along a trackway is used as a source of information to constrain inferences of trackmaker behavior. The computed DGA for this sauropod suggests significantly smaller trackmakers than conventional estimations based on track dimensions and hip height estimates. Size estimation by this approach offers greatly reduced uncertainty compared to conventional estimates.
PubDate: 2022-05-12
DOI: 10.1186/s00015-022-00418-9
-
- New paleontological and biostratigraphical data (calcareous nannofossils,
ostracods, brachiopods), correlations and lithostratigraphic units in the
Urgonian facies (latest Hauterivian-Barremian) of the Swiss and French
Jura Mountains: the Falaises Member and the Saars Formation (former
“Gorges de l’Orbe Formation”)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract From latest Hauterivian to latest Barremian, the Urgonian facies of the Swiss and French Jura Mountains are subdivided into three formations and five members: new Saars Formation (= former “Gorges de l’Orbe Formation” sensu Strasser et al., 2016; Pictet, 2021) with a new Falaises Member below the Montcherand and Bôle members of Pictet (2021), Rocher des Hirondelles Formation with Fort de l’Ecluse and Rivière members (Pictet, 2021, revised), and Vallorbe Formation (revised from Strasser et al., 2016 and the “Vallorbe Member” of Pictet, 2021). The latest Hauterivian-early Late Barremien Saars Formation includes three members 1) to 3): 1) Latest Hauterivian-Early Barremian Falaises Member with new Early Barremian nannoflora from the Corcelles Marls (much younger than the late Early Hauterivian nannoflora from the Uttins Marls of the type locality at Mont de Chamblon), primitive orbitolinids Praedictyorbitolina claveli Schroeder, 1994; and fossils/microfossils usually considered as Hauterivian markers: echinids Pseudholaster intermedius (Münster in Goldfuss, 1826), brachiopods Glosseudesia semistriata (Defrance, 1828), Lamellaerynchia hauteriviensis Burri, 1953 and Plicarostrum aubersonense Burri, 1956, and ostracods of the Assemblage 1 [Protocythere triplicata (Roemer, 1841), Rehacythereis bernardi (Grosdidier, 1964), Schuleridea clunicularis (Triebel, 1938), Schuleridea gr. thoerenensis (Triebel, 1938)]. 2) Early Barremian Montcherand Member with brachiopods Glosseudesia inexpectata Mojon, n. sp. and Glosseudesia ebrodunensis (de Loriol, 1864), and ostracods of the Assemblage 2 [Strigosocythere strigosa (Grosdidier, 1964), P. triplicata, and juvenile immature species markers of the next ostracod Assemblage 3]. 3) Early to early Late Barremian Bôle Member with adult ostracod markers of the Assemblage 3 [Rehacythereis geometrica (Damotte and Grosdidier, 1963), Bairdoppilata barremiana Mojon, n. sp., Bairdoppilata luminosa Kuznetsova, 1961; Neocythere (Centrocythere) gottisi Damotte and Grosdidier, 1963; Schuleridea derooi Damotte and Grosdidier, 1963; Schuleridea alata Kaye, 1965; Dolocytheridea intermedia Oertli, 1958]. 4) The Early to Late Barremian Fort de l’Ecluse Member/Rocher des Hirondelles Formation and Late Barremian Rivière Member/Vallorbe Formation are characterized by markers such as echinids Heteraster couloni (L. Agassiz, 1839), orbitolinids [Praedictyorbitolina carthusiana Schoeder et al., 1990; Eopalorbitolina charollaisi Schroeder and Conrad, 1967; Valserina broennimanni Schroeder and Conrad, 1967; Paleodictyoconus actinostoma Arnaud-Vanneau and Schroeder, 1976; Paracoskinolina maynci (Chevalier, 1961)], and typical ostracods of the Assemblage 4 [Strigosocythere chalilovi (Kuznetsova, 1961), Rehacythereis buechlerae (Oertli, 1958) only in the southern Jura and replaced by R. geometrica in the central Jura, Platycythereis rostrata Sauvagnat, 1999] extended in the latest Barremian-Early Aptian Fulie Member of the basal Perte-du-Rhône Formation defined by Pictet et al. (2016).
PubDate: 2022-05-10
DOI: 10.1186/s00015-022-00416-x
-
- Integrated stratigraphic, sedimentological and petrographical evaluation
for CERN’s Future Circular Collider subsurface infrastructure (Geneva
Basin, Switzerland-France)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract The European Organization for Nuclear Research (CERN) is currently undertaking a feasibility study to build the next-generation particle accelerator, named the Future Circular Collider (FCC), hosted in a 90–100 km subsurface infrastructure in the Geneva Basin, extending across western Switzerland and adjacent France. This article represents a preliminary, basin-scale stratigraphic and lithotype analysis using state-of-the-art Swiss and French stratigraphic terminology, set in context with the FCC. Existing stratigraphic information, rock cores and well reports, laboratory analyses and geophysical well-logs from 661 wells representative for the construction area have been integrated to pave the way for a multidisciplinary approach across several geoscientific and engineering domains to guide the FCC’s upcoming technical design phase. Comparisons with well-log data allowed the identification of rock formations and lithotypes, as well as to formulate a preliminary assessment of potential geological hazards. Regional stratigraphic evaluation revealed the FCC’s intersection of 13 geological formations comprising 25 different lithotypes across the Geneva Basin. A lack of data remains for the western to south-western subsurface region of the FCC construction area shown by well-density coverage modelling. The main geological hazards are represented by karstic intervals in the Grand Essert Formation’s Neuchâtel Member, Vallorbe and Vuache formations, associated to fractured limestone lithotypes, and Cenozoic formations represented by the pure to clayey sandstone-bearing Transition zone and Siderolithic Formation. Potential swelling hazard is associated to the presence of anhydrite, and claystone lithotypes of the Molasse Rouge and Grès et Marnes Gris à gypse formations, yielding up to 17.2% of smectite in the Molasse Rouge formation. Hydrocarbon indices in both gaseous and bituminous forms are encountered in the majority of investigated wells, and bear a potential environmental hazard associated with the Molasse Rouge deposits and fractured limestones of the Mesozoic Jura formations.
PubDate: 2022-05-03
DOI: 10.1186/s00015-022-00407-y
-
- Crushed but not lost: a colubriform snake (Serpentes) from the Miocene
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract An incomplete postcranial skeleton of a snake from the middle Miocene of the Swiss Molasse in Käpfnach mine, near Zurich, Switzerland, is described in this paper. The skeleton is rather crushed and resting on a block of coal, with only some articulated vertebrae partially discerned via visual microscopy. We conducted micro-CT scanning in the specimen and we digitally reconstructed the whole preserved vertebral column, allowing a direct and detailed observation of its vertebral morphology. Due to the flattened nature of the fossil specimen, several individual vertebral structures are deformed, not permitting thus a secure precise taxonomic identification. Accordingly, we only refer the specimen to as Colubriformes indet. Nevertheless, this occurrence adds to the exceedingly rare fossil record of snakes from Switzerland, which had so far been formally described solely from three other Eocene and Miocene localities.
PubDate: 2022-04-22
DOI: 10.1186/s00015-022-00417-w
-
- Serpentinite dehydration at low pressures
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract Petrographic observations combined with mineral compositional analyses constrain the phase relations of prograde metamorphosed serpentinites in the Bergell contact aureole (Italy). In a 1500 m profile perpendicular to the north-eastern edge of the Bergell intrusion, seven dehydration reactions ran to completion. Three previously undocumented reactions have been identified within 70 m of the intrusive contact: olivine + anthophyllite = orthopyroxene + H2O, tremolite + Cr–Al-spinel = olivine + Mg-hornblende + H2O and chlorite = olivine + orthopyroxene + Cr-Al-spinel + H2O. Petrological analysis indicates that these reactions occur over a narrow range of pressure and temperature, 300 ± 30 MPa and 720 ± 10 °C respectively. Computed phase diagram sections reproduce the observed mineral parageneses with one notable exception. Due to the underestimation of aluminium and sodium contents in Ca-amphibole models, plagioclase is predicted above 700 °C instead of Mg-hornblende. In comparison with natural grains, the aluminium content of computed chlorite compositions is overestimated for low grade parageneses while it is underestimated near the upper thermal stability limit of chlorite. In the computed sections, Fe partitioning relative to Mg between olivine and other silicates, suggests a clear preference for Fe in olivine, that therefore shows lower Mg#s. In contrast, microprobe analyses of natural mineral pairs indicate that orthopyroxene, Mg-hornblende and anthophyllite have lower Mg#s than equilibrium olivine. The inferred thermal profile of the metamorphic aureole is not consistent with simple heat conduction models and indicates a contact temperature of ~ 800 °C, which is 120–230 °C higher than previously estimated. Petrography also reveals extensive retrograde overprint of the prograde parageneses within 200 m of the contact. Retrogression is related to metamorphic fluids that were released by dehydration reactions during contact metamorphism and magmatic fluids expelled from the tonalite intrusion. The thermal gradient between the intrusion and the country rocks induced hydrothermal circulation of these fluids throughout the contact aureole, which beyond peak metamorphic conditions caused retrograde overprint of the prograde parageneses. The proposed phase relations for low and high pressures, and in particular, the transition from tremolite to Mg-hornblende, provides a complete representation of hydration and dehydration processes in serpentinites in subduction zones, along deep oceanic transform faults, and at passive continental margins. The latter has new implications, specifically for subduction initiation.
PubDate: 2022-04-15
DOI: 10.1186/s00015-022-00415-y
-
- Traces of a prehistoric and potentially tsunamigenic mass movement in the
sediments of Lake Thun (Switzerland)-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract Mass movements constitute major natural hazards in the Alpine realm. When triggered on slopes adjacent to lakes, these mass movements can generate tsunami-like waves that may cause additional damage along the shore. For hazard assessment, knowledge about the occurrence, the trigger and the geomechanical and hydrogeological mechanisms of these mass movements is necessary. For reconstructing mass movements that occurred in or adjacent to lakes, the lakes’s sedimentary record can be used as an archive. Here, we present a prehistorical mass-movement event, of which the traces were found in an alpine lake, Lake Thun, in central Switzerland. The mass movement is identified by large blocks on the bathymetric map, a chaotic to transparent facies on the reflection seismic profiles, and by a mixture of deformed lake sediments and sandy organic-rich layers in the sediment-core record. The event is dated at 2642–2407 cal year BP. With an estimated volume of ~ 20 × 106 m3 it might have generated a wave with an initial amplitude of > 30 m. In addition to this prehistorical event, two younger deposits were identified in the sedimentary record. One could be dated at 1523–1361 cal year BP and thus can be potentially related to an event in 598/599 AD documented in historical reports. The youngest deposit is dated at 304–151 cal year BP (1646–1799 AD) and is interpreted to be related to the artificial Kander river deviation into Lake Thun (1714 AD).
PubDate: 2022-04-09
DOI: 10.1186/s00015-022-00405-0
-
- Glaciofluvial sequences recording the Birrfeld Glaciation (MIS 5d–2) in
the Bern area, Swiss Plateau-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract In this paper, we document that glaciofluvial gravel sequences and glacial till deposits that are exposed in the Müntschemier and Finsterhennen gravel pits (Swiss Plateau west of Bern) record three glacial advances during the Birrfeld Glaciation, which corresponds to the last glacial cycle. Sedimentological logging shows that both gravel pits expose deposits of glaciofluvial braided river systems. These sediments are overlain by a till that was deposited during the Last Glacial Maximum (LGM). The results of the provenance analysis imply that the sediments were mainly supplied by the Valais Glacier, which originated in the Central Alps. A minor contribution of the material was supplied by the Saane Glacier with sources in the northern parts of the Alps. In addition, the morphometric analysis particularly of quartzite clasts in the till deposits indicate that while some clasts (the angular ones) were eroded and transported by the Valais Glacier from the Central Alps to the depositional site, the majority of the quartzite constituents (the rounded ones) were most likely reworked from the Molasse bedrock or older gravels. This implies that a large fraction of the sediments in the Müntschemier and Finsterhennen gravel pits could represent recycled material from older fluvial gravels and conglomerates that were then reworked by the glaciers as they advanced to the foreland. Based on the sedimentological data and considering published and new optically stimulated luminescence (OSL) chronological data, we propose a landscape evolution scenario where the first glacial advance occurred during Marine Isotope Stage (MIS) 5d. The second glacier advance followed during MIS 4, while the last one during the Last Glacial Maximum (LGM), which corresponds to the MIS 2. The MIS 5d advance is recorded by the lowest unit of the Müntschemier gravel pit and consists of a fining upward sequence made up of an alternation of gravel and sand beds. The MIS 4 advance is recorded by the unit beneath the LGM till at Müntschemier and by the lowermost layer in the Finsterhennen gravel pit. It comprises an alternation of gravel and sand beds, which coarsens and thickens upwards. The LGM advance, finally, resulted in the deposition of amalgamated gravel beds at Finsterhennen, which ended with the construction of a till that is encountered on the top of both gravel pits. Sediments related to the interstadial conditions between MIS 5a and MIS 5b and MIS 3 were not encountered, which suggests that the warmer periods were characterised by non-deposition and/or erosion, which possibly resulted in the observed sedimentary hiatus. Although the chronological results are still preliminary, the available information allows us to suggest that during the Birrfeld Glaciation, the Valais lobe advanced several times to the Swiss Plateau. In addition, the facies associations imply that the eastward expansion of the Valais lobe during the MIS 5d and MIS 4 were most likely shorter than during the LGM.
PubDate: 2022-03-26
DOI: 10.1186/s00015-022-00414-z
-
- Early Pleistocene complex cut-and-fill sequences in the Alps
-
Free pre-print version: Loading...Rate this result: What is this?Please help us test our new pre-print finding feature by giving the pre-print link a rating.
A 5 star rating indicates the linked pre-print has the exact same content as the published article.
Abstract: Abstract Cut-and-fill sequences are the result of climatically or tectonically induced alternating aggradation and incision phases of a fluvial system. A recently established cosmogenic nuclide chronology of the Cover Gravels (Deckenschotter in German) in the northern Alpine Foreland, which are the oldest Quaternary glaciofluvial gravels and comprise evidence of early Pleistocene glaciations, suggests a cut-and-fill build-up. This suggested cut-and-fill architecture challenges the morphostratigraphy. The Deckenschotter deposits represent a suitable archive for reconstructing drainage patterns, base level changes, and the landscape evolution of the northern Alpine Foreland during the early Pleistocene. In this study, we focused on the highest morphostratigraphic Deckenschotter sites: three at Irchel and one in the area around Lake Constance. Sediment analyses were performed to determine their provenance and depositional environments. The geochronology was established using isochron-burial dating. The results indicate that the sediments were transported from the Central and eastern Central Alps, as well as from the Molasse, to the foreland and deposited in a proximal glaciofluvial environment. Based on these findings, we propose that the Deckenschotter are cut-and-fill sequences that accumulated in three stages during the early Pleistocene at ca. 2.5 Ma, ca. 1.5 Ma, and ca. 1 Ma. The presence of a cut-and-fill system implies that the regional base level was relatively constant during the early Pleistocene. In addition, the ca. 2.5 Ma glaciofluvial gravels document the first evidence of glaciers in the northern Alpine Foreland. This timing is synchronous with the onset of Quaternary glaciation in the northern hemisphere at ca. 2.7 Ma.
PubDate: 2022-03-24
DOI: 10.1186/s00015-022-00411-2
-
