Subjects -> ENVIRONMENTAL STUDIES (Total: 913 journals)
    - ENVIRONMENTAL STUDIES (810 journals)
    - POLLUTION (31 journals)
    - TOXICOLOGY AND ENVIRONMENTAL SAFETY (54 journals)
    - WASTE MANAGEMENT (18 journals)

ENVIRONMENTAL STUDIES (810 journals)            First | 1 2 3 4 5     

Showing 401 - 378 of 378 Journals sorted alphabetically
International Journal of Environment and Sustainable Development     Hybrid Journal   (Followers: 17)
International Journal of Environment and Waste Management     Hybrid Journal   (Followers: 2)
International Journal of Environment, Workplace and Employment     Hybrid Journal   (Followers: 7)
International Journal of Environmental Engineering     Hybrid Journal   (Followers: 6)
International Journal of Environmental Health Engineering     Open Access   (Followers: 1)
International Journal of Environmental Health Research     Hybrid Journal   (Followers: 2)
International Journal of Environmental Policy and Decision Making     Hybrid Journal   (Followers: 3)
International Journal of Environmental Research     Hybrid Journal  
International Journal of Environmental Research and Public Health     Open Access   (Followers: 22)
International Journal of Environmental Science and Technology     Hybrid Journal   (Followers: 5)
International Journal of Environmental Studies     Hybrid Journal   (Followers: 5)
International Journal of Exergy     Hybrid Journal   (Followers: 2)
International Journal of Global Environmental Issues     Hybrid Journal   (Followers: 4)
International Journal of Global Sustainability     Open Access   (Followers: 2)
International Journal of Global Warming     Hybrid Journal  
International Journal of Greenhouse Gas Control     Partially Free   (Followers: 5)
International Journal of Hygiene and Environmental Health     Hybrid Journal   (Followers: 7)
International Journal of Logistics Research and Applications : A Leading Journal of Supply Chain Management     Hybrid Journal   (Followers: 16)
International Journal of Mining and Geo-Engineering     Open Access  
International Journal of Phytoremediation     Hybrid Journal   (Followers: 1)
International Journal of Process Systems Engineering     Hybrid Journal   (Followers: 1)
International Journal of Recycling of Organic Waste in Agriculture     Open Access   (Followers: 1)
International Journal of Reliability and Safety     Hybrid Journal   (Followers: 11)
International Journal of Renewable Energy Development     Open Access   (Followers: 6)
International Journal of Social Sciences and Management     Open Access   (Followers: 2)
International Journal of Soil, Sediment and Water     Open Access   (Followers: 4)
International Journal of Stress Management     Full-text available via subscription   (Followers: 6)
International Journal of Sustainable Construction Engineering and Technology     Open Access   (Followers: 7)
International Journal of Sustainable Engineering     Hybrid Journal   (Followers: 4)
International Journal of Sustainable Materials and Structural Systems     Hybrid Journal   (Followers: 1)
International Journal of Sustainable Society     Hybrid Journal   (Followers: 2)
International Journal of the Commons     Open Access   (Followers: 2)
International Journal of Toxicology     Hybrid Journal   (Followers: 17)
International Journal of Water Resources and Environmental Engineering     Open Access   (Followers: 11)
International Review of Environmental and Resource Economics     Full-text available via subscription   (Followers: 3)
Iranian Journal of Health and Environment     Open Access  
ISLE: Interdisciplinary Studies in Literature and Environment     Hybrid Journal   (Followers: 3)
Isotopes in Environmental and Health Studies     Hybrid Journal  
JACEE (Journal of Advanced Civil and Environmental Engineering)     Open Access  
Jahangirnagar University Environmental Bulletin     Open Access  
Journal for the History of Environment and Society     Open Access   (Followers: 3)
Journal of Bioremediation & Biodegradation     Open Access   (Followers: 1)
Journal of Earth Science & Climatic Change     Open Access   (Followers: 14)
Journal of Petroleum & Environmental Biotechnology     Open Access   (Followers: 1)
Journal of Advances in Environmental Health Research     Open Access   (Followers: 2)
Journal Of Advances In Natural Sciences     Open Access   (Followers: 1)
Journal of Aging and Environment     Hybrid Journal   (Followers: 4)
Journal of Agricultural and Environmental Ethics     Hybrid Journal   (Followers: 8)
Journal of Agricultural Chemistry and Environment     Open Access   (Followers: 3)
Journal of Agriculture and Ecology Research International     Open Access  
Journal of Air Pollution and Health (رتبه علمی- پژوهشی)     Open Access  
Journal of Anatolian Environmental and Animal Sciences     Open Access  
Journal of Applied Ecology     Hybrid Journal   (Followers: 205)
Journal of Applied Meteorology and Climatology     Hybrid Journal   (Followers: 42)
Journal of Applied Sciences and Environmental Management     Open Access   (Followers: 1)
Journal of Applied Toxicology     Hybrid Journal   (Followers: 19)
Journal of Applied Volcanology     Open Access   (Followers: 7)
Journal of Applied Water Engineering and Research     Hybrid Journal  
Journal of Arid Environments     Hybrid Journal   (Followers: 12)
Journal of Biochemical and Molecular Toxicology     Hybrid Journal   (Followers: 4)
Journal of Biosystems Engineering     Full-text available via subscription  
Journal of Chemical Ecology     Hybrid Journal   (Followers: 4)
Journal of Civil Engineering and Environmental Sciences     Open Access  
Journal of Climate     Hybrid Journal   (Followers: 56)
Journal of Climate Change and Health     Open Access   (Followers: 4)
Journal of Coastal Research     Hybrid Journal   (Followers: 31)
Journal of Contaminant Hydrology     Hybrid Journal   (Followers: 19)
Journal of Earth, Environment and Health Sciences     Open Access   (Followers: 2)
Journal of East African Natural History     Full-text available via subscription   (Followers: 7)
Journal of Ecology     Hybrid Journal   (Followers: 133)
Journal of Ecology and Environment     Open Access   (Followers: 3)
Journal of Economic Development, Environment and People     Open Access   (Followers: 11)
Journal of Energy & Natural Resources Law     Hybrid Journal   (Followers: 5)
Journal of Energy and Environment Technology of Graduate School Siam Technology College     Open Access  
Journal of Environment and Earth Science     Open Access   (Followers: 11)
Journal of Environment and Ecology     Open Access   (Followers: 10)
Journal of Environment Pollution and Human Health     Open Access   (Followers: 3)
Journal of Environmental Analysis and Progress     Open Access  
Journal of Environmental and Agricultural Studies     Open Access   (Followers: 1)
Journal of Environmental and Public Health     Open Access   (Followers: 16)
Journal of Environmental Assessment Policy and Management     Hybrid Journal   (Followers: 5)
Journal of Environmental Chemical Engineering     Hybrid Journal   (Followers: 5)
Journal of Environmental Economics and Policy     Partially Free   (Followers: 4)
Journal of Environmental Education     Hybrid Journal   (Followers: 7)
Journal of Environmental Engineering and Landscape Management     Open Access   (Followers: 8)
Journal of Environmental Engineering and Science     Hybrid Journal   (Followers: 2)
Journal of Environmental Extension     Full-text available via subscription  
Journal of Environmental Geography     Open Access   (Followers: 6)
Journal of Environmental Law     Hybrid Journal   (Followers: 22)
Journal of Environmental Management     Hybrid Journal   (Followers: 44)
Journal of Environmental Management     Open Access   (Followers: 1)
Journal of Environmental Management and Tourism     Open Access   (Followers: 13)
Journal of Environmental Media     Hybrid Journal  
Journal of Environmental Planning and Management     Hybrid Journal   (Followers: 26)
Journal of Environmental Policy & Planning     Hybrid Journal   (Followers: 14)
Journal of Environmental Professionals Sri Lanka     Open Access  
Journal of Environmental Protection     Open Access   (Followers: 1)
Journal of Environmental Science and Health, Part A: Toxic/Hazardous Substances and Environmental Engineering     Hybrid Journal   (Followers: 5)
Journal of Environmental Science and Health, Part B: Pesticides, Food Contaminants, and Agricultural Wastes     Hybrid Journal   (Followers: 5)
Journal of Environmental Science and Technology     Open Access   (Followers: 7)
Journal of Environmental Sciences     Full-text available via subscription   (Followers: 8)
Journal of Environmental Statistics     Open Access   (Followers: 4)
Journal of Environmental Studies and Sciences     Partially Free   (Followers: 2)
Journal of Environmental Sustainability     Open Access   (Followers: 7)
Journal of Environments     Open Access  
Journal of Exposure Science and Environmental Epidemiology     Hybrid Journal   (Followers: 6)
Journal of Fisheries and Environment     Open Access  
Journal of Forest and Natural Resource Management     Open Access  
Journal of Freshwater Ecology     Hybrid Journal   (Followers: 14)
Journal of Geography, Environment and Earth Science International     Open Access  
Journal of Geoscience and Environment Protection     Open Access  
Journal of Great Lakes Research     Hybrid Journal   (Followers: 5)
Journal of Green Building     Full-text available via subscription   (Followers: 10)
Journal of Hazardous Materials     Hybrid Journal   (Followers: 12)
Journal of Hazardous Materials Advances     Open Access  
Journal of Health Management     Hybrid Journal   (Followers: 10)
Journal of Health Organisation and Management     Hybrid Journal   (Followers: 29)
Journal of Housing and the Built Environment     Hybrid Journal   (Followers: 8)
Journal of Human Behavior in the Social Environment     Hybrid Journal   (Followers: 6)
Journal of Hydrology X     Open Access   (Followers: 5)
Journal of Industrial Ecology     Hybrid Journal   (Followers: 17)
Journal of Integrative Environmental Sciences     Hybrid Journal   (Followers: 4)
Journal of International Maritime Safety, Environmental Affairs, and Shipping     Open Access   (Followers: 1)
Journal of Iron and Steel Research International     Hybrid Journal   (Followers: 7)
Journal of Korean Society of Environmental Engineers     Open Access  
Journal of Land Use Science     Hybrid Journal   (Followers: 3)
Journal of Management and Sustainability     Open Access   (Followers: 7)
Journal of Mega Infrastructure & Sustainable Development     Hybrid Journal  
Journal of Natural Resources and Development     Open Access   (Followers: 1)
Journal of Natural Sciences Research     Open Access   (Followers: 1)
Journal of Occupational and Environmental Hygiene     Hybrid Journal   (Followers: 6)
Journal of Operational Oceanography     Hybrid Journal   (Followers: 5)
Journal of Organizational Behavior     Hybrid Journal   (Followers: 61)
Journal of Outdoor and Environmental Education     Hybrid Journal   (Followers: 2)
Journal of Pharmacological and Toxicological Methods     Hybrid Journal   (Followers: 7)
Journal of Plant Science and Phytopathology     Open Access  
Journal of Policy Analysis and Management     Hybrid Journal   (Followers: 28)
Journal of Population and Sustainability     Open Access  
Journal of Reliable Intelligent Environments     Hybrid Journal  
Journal of Renewable and Sustainable Energy     Hybrid Journal   (Followers: 10)
Journal of Research in Forestry, Wildlife and Environment     Open Access   (Followers: 5)
Journal of Rural and Community Development     Open Access   (Followers: 1)
Journal of Safety Engineering     Open Access   (Followers: 37)
Journal of Safety Research     Hybrid Journal   (Followers: 89)
Journal of School Violence     Hybrid Journal   (Followers: 6)
Journal of Sustainability and Environmental Management     Open Access  
Journal of Sustainable Development     Open Access   (Followers: 24)
Journal of Sustainable Development Studies     Open Access   (Followers: 15)
Journal of Sustainable Society     Open Access   (Followers: 2)
Journal of the American Planning Association     Hybrid Journal   (Followers: 18)
Journal of the Atmospheric Sciences     Hybrid Journal   (Followers: 83)
Journal of Tropical Ecology     Hybrid Journal   (Followers: 15)
Journal of Urban and Environmental Engineering     Open Access   (Followers: 5)
Journal of Urban Ecology     Open Access   (Followers: 5)
Journal of Vietnamese Environment     Open Access   (Followers: 1)
Journal of Water and Environmental Nanotechnology     Open Access   (Followers: 1)
Journal of Water Security     Open Access   (Followers: 6)
Julius-Kühn-Archiv     Open Access  
Jurnal Kesehatan Lingkungan     Open Access  
Jurnal Manusia dan Lingkungan     Open Access  
Jurnal Pengendalian Pencemaran Lingkungan     Open Access  
Jurnal Presipitasi     Open Access   (Followers: 1)
Jurnal Rekayasa Kimia & Lingkungan     Open Access  
Jurnal Sains & Teknologi Lingkungan     Open Access  
Jurnal Wilayah dan Lingkungan     Open Access  
Knowledge Management Research & Practice     Hybrid Journal   (Followers: 16)
Koedoe : African Protected Area Conservation and Science     Open Access   (Followers: 2)
Lake and Reservoir Management     Hybrid Journal   (Followers: 7)
Landscape Ecology     Hybrid Journal   (Followers: 61)
Landscapes     Hybrid Journal   (Followers: 18)
Latin American Journal of Management for Sustainable Development     Hybrid Journal  
Letras Verdes. Revista Latinoamericana de Estudios Socioambientales     Open Access  
Limnological Review     Open Access   (Followers: 3)
Living Reviews in Landscape Research     Open Access  
Local Environment: The International Journal of Justice and Sustainability     Hybrid Journal   (Followers: 8)
Low Carbon Economy     Open Access   (Followers: 4)
Luna Azul     Open Access  
M+A. Revista Electrónica de Medioambiente     Open Access  
Macquarie Journal of International and Comparative Environmental Law     Full-text available via subscription   (Followers: 7)
Madagascar Conservation & Development     Open Access   (Followers: 2)
Management International Review     Hybrid Journal   (Followers: 7)
Management of Environmental Quality: An International Journal     Hybrid Journal   (Followers: 2)
Management of Sustainable Development     Open Access   (Followers: 4)
Marine Ecology     Hybrid Journal   (Followers: 27)
Marine Ecology Progress Series MEPS     Hybrid Journal   (Followers: 34)
Marine Environmental Research     Hybrid Journal   (Followers: 31)
Marine Pollution Bulletin     Hybrid Journal   (Followers: 35)
Materials for Renewable and Sustainable Energy     Open Access   (Followers: 6)
Medio Ambiente y Urbanizacion     Full-text available via subscription  
Mediterranean Geoscience Reviews     Hybrid Journal  
Membranes     Open Access   (Followers: 3)
Metabarcoding and Metagenomics     Open Access  
Michigan Journal of Sustainability     Open Access   (Followers: 1)
Microbial Risk Analysis     Full-text available via subscription  
Microplastics and Nanoplastics     Open Access   (Followers: 1)
Mine Water and the Environment     Hybrid Journal   (Followers: 4)
Mitigation and Adaptation Strategies for Global Change     Open Access   (Followers: 8)
Modeling Earth Systems and Environment     Hybrid Journal   (Followers: 1)
Monteverdia     Open Access   (Followers: 1)
Multequina     Open Access  

  First | 1 2 3 4 5     

Similar Journals
Journal Cover
Journal of Iron and Steel Research International
Journal Prestige (SJR): 0.569
Citation Impact (citeScore): 1
Number of Followers: 7  
 
  Hybrid Journal Hybrid journal (It can contain Open Access articles)
ISSN (Print) 1006-706X - ISSN (Online) 2210-3988
Published by Springer-Verlag Homepage  [2469 journals]
  • Effect of Mg addition on TiN inclusions in GCr15 bearing steel

    • Free pre-print version: Loading...

      Abstract: Abstract Compared with the original GCr15 bearing steel, TiN inclusions are greatly reduced by the effect of Mg addition, and many different types of non-metallic Mg-containing inclusions were observed in Mg-treated GCr15 bearing steel which includes MgO, MgS·MnS, MgO–MgS·MnS, MgAl2O4–MgS·MnS, MgO–TiN, MgS·MnS–TiN, and MgO–MgS·MnS–TiN. The inclusion size distribution based on automatic inclusion analysis software shows that the number of inclusion with the size ranging from 1 to 3 μm increases obviously because a large amount of MgO, MgS·MnS, TiN inclusions containing Mg with smaller sizes are massively generated. In situ observation on the experimental steel by high-temperature confocal laser scanning microscopy confirms that MgO can provide nucleation sites for TiN. In addition, the MgS·MnS and MgO–MgS·MnS inclusions can also provide positions for the nucleation of TiN. Thermodynamic calculations indicate that after Mg addition to liquid steel, a large number of fine MgO inclusions are generated in the liquid steel because of the strong reactivity of Mg and O. At the same time, MgS precedes TiN precipitates in the solid–liquid two-phase region; thus, MgO and MgS·MnS can provide sites for TiN nucleation. At last, two possible formation pathways for the above various TiN inclusions containing Mg are discussed.
      PubDate: 2022-06-01
       
  • Morphologies of secondary austenite in 2507 duplex stainless steel after
           heat treatment

    • Free pre-print version: Loading...

      Abstract: Abstract The microstructure evolution of secondary austenite in 2507 duplex stainless steel was investigated by means of optical metallography, scanning electron microscopy and confocal scanning laser microscopy. Four types of secondary austenite (γ2) morphologies including partially transformed austenite, grain boundary austenite, Widmannstätten austenite (WA) and intragranular austenite could be formed during cooling after solution treatment. It was concluded that secondary austenite morphology was mainly dependent on cooling rates. Two mechanisms of WA formation were proposed. WA nucleated at grain boundary of ferrite or at the formed phase boundary. Transmission electron microscopy (TEM) analysis displayed that WA grew in parallel to the ferrite. The effects of Cr2N on secondary austenite precipitation were discussed in detail. Once Cr2N was involved, a mechanism was proposed that secondary austenite formed by element diffusion, leading to the migration of the austenite–ferrite interface. Cr2N acted as the nucleation sites for γ2 and provided the nitrogen for the transformation; meanwhile, the precipitation of Cr2N during the rapid cooling was captured by TEM. A process of nucleation followed by diffusion was concluded to be the formation of secondary austenite with no Cr2N precipitated. The decomposition of secondary austenite was also studied, which was found to be a diffusion mechanism followed by displacement in connection with the element distribution.
      PubDate: 2022-06-01
       
  • Effect of pre-oxidation degree on gaseous reduction of pre-oxidized
           ilmenite concentrate by CO

    • Free pre-print version: Loading...

      Abstract: Abstract The effect of pre-oxidation degree of Panzhihua ilmenite concentrate on the gaseous reduction by carbon monoxide was investigated. The raw ilmenite concentrates were pre-oxidized at 600, 700, 800, 900, and 1000 °C for 2 h, respectively. The phase change, FeO content, and morphology after the oxidation at various temperatures were characterized. The oxidation degree was calculated according to the change of FeO content. Thermogravimetry was performed on the oxidized ilmenite concentrate samples (oxidized at 600, 800, and 1000 °C) at 850, 900, and 950 °C, respectively. The results show that the pre-oxidation of ilmenite concentrate can accelerate the reduction process: the higher pre-oxidation degree, the faster reduction rate. The high pre-oxidation degree of ilmenite concentrate is beneficial to accelerate the subsequent reduction process in two ways. Three stages of the reduction process were divided via the first derivatives of reduction degree, and the reduction mechanism and apparent activation energy were discussed subsequently.
      PubDate: 2022-06-01
       
  • Phase equilibria in Ti-rich portion and thermodynamic re-optimization of
           Co–Ti system

    • Free pre-print version: Loading...

      Abstract: Abstract The experimental and thermodynamic studies of the Co–Ti system are an important part of the project to build a thermodynamic database for multicomponent Co–Ti-based alloys. Several key alloys were prepared and then examined for microstructural, compositional and thermal analyses to determine the Ti-rich phase equilibria. According to the available experimental information, the Co–Ti system was thermodynamically re-optimized on the basis of CALPHAD method. Four disordered solutions, liquid, fcc-A1 (α-Co), bcc-A2 (β-Ti) and hcp-A3 (ε-Co and α-Ti) were modeled as substitutional ones. CoTi2 with limited solubility was treated as a stoichiometric compound, while γ-Co2Ti and β-Co2Ti with certain solubility were described in the form of (Co,Ti)2(Co,Ti)1 using a two-sublattice model. A single Gibbs energy function was employed to model two order–disorder transformations from fcc-A1 to fcc-L12 (Co3Ti) and from bcc-A2 to bcc-B2 (CoTi). A group of self-consistent thermodynamic parameters of the Co–Ti system were obtained. With these thermodynamic parameters, the experimental data can be described more reasonably and satisfactorily.
      PubDate: 2022-06-01
       
  • Leaching process of phosphorus and iron from steelmaking slag into malic
           acid solution

    • Free pre-print version: Loading...

      Abstract: Abstract In order to remove phosphorus element from steelmaking slag and decrease iron loss, malic acid was selected as the leaching agent to dissolve steelmaking slag. Firstly, the influences of different factors, such as malic acid concentration, slag particle size, temperature, liquid/solid ratio and stirring speed, on the leaching ratios of phosphorus and iron were studied. Then, the kinetics for the leaching process of phosphorus was analyzed. The results showed that the leaching ratios of phosphorus and iron increase significantly with increasing the malic acid solution concentration and liquid/solid ratio. When the concentration of malic acid solution increases up to 0.01492 mol/L, about 80% phosphorus can be dissolved, and iron leaching ratio is less than 17%. In addition, decreasing slag particle size can obviously increase the leaching ratio of phosphorus. However, temperature and stirring speed have no significant effect on the dissolution of phosphorus and iron. The leaching kinetics of phosphorus follows the unreacted shrinking core model. Diffusion through product layer is the rate-limiting step of the leaching process, and the corresponding apparent activation energy is determined to be 3.32 kJ/mol. Finally, a semi-empirical kinetic equation was established.
      PubDate: 2022-06-01
       
  • Effect of strain rate on fracture behaviour of Cr18Ni11Ti stainless steel
           at high temperatures

    • Free pre-print version: Loading...

      Abstract: Abstract The effect of strain rate on the fracture behaviour of Cr18Ni11Ti stainless steel at high temperatures was analysed. The steel was subjected to solid solution treatment at 1050 °C and ageing at 650 °C for 24 h. The high-temperature tensile properties of Cr18Ni11Ti stainless steel were subsequently investigated via high-temperature tensile testing at 650 °C and different strain rates (1.43 × 10–1, 1.43 × 10–2, 1.43 × 10–3, 1.43 × 10–4, and 1.43 × 10–5 s−1). The microstructure, precipitated phase, tensile fracture surface, and dislocation of the experimental steel were analysed by scanning electron microscopy, transmission electron microscopy and energy spectrometry. The results show that Cr18Ni11Ti stainless steel is mainly austenite, with a large number of twin crystals, chromium-rich precipitated phase and composite precipitated phases of TiC and AlMgCaO. With decreases in strain rate, the yield strength, ultimate tensile strength, and reduction in area also decrease. When the strain rate is high, obvious necking and ductile fracture occur in the experimental steel. However, when the strain rate is reduced to 1.43 × 10–5 s−1, the necking phenomenon is not obvious and intergranular brittle fracture appears. Greater segregation of P and S contents at grain boundaries, or dislocation motion creep and grain-boundary sliding creep, leads to brittle fracture of the steel at lower strain rates of 1.43 × 10–4 to 1.43 × 10–5 s−1.
      PubDate: 2022-06-01
       
  • Influence of desulfurization slag containing oxides of vanadium and
           titanium on semi-steel pre-desulfurization

    • Free pre-print version: Loading...

      Abstract: Abstract The desulfurization and resulfurization of slag containing oxides of vanadium and titanium (CaO–SiO2–MgO–Al2O3–V2O3–TiO2–FeO) in the pretreatment of semi-steel desulfurization at 1623 K were investigated. Based on the ionic structure theory of slag, it could be concluded that V2O3 and TiO2 combined with (O2–) to form complex anions including \({\mathrm{VO}}_{3}^{3-}\) , \({\text{Ti}}{\text{O}}_{4}^{{4}-},\) etc., which reduced the activity of (O2–) and decreased the sulfur partition ratio (LS). And FeO enhanced the activity of [O] at the slag–metal interface, which decreased the desulfurization capacity of the slag. Compared to the binary basicity, the presented basicity expression containing V2O3 and TiO2 described the relationship between LS and basicity more accurately. Considering the problems of dilute slag, a large amount of residual slag and much resulfurization in the slagging-off process after pretreatment, the effect of CaO + C-based slag modifier on the resulfurization, melting point and viscosity of the desulfurization slag was investigated. It was proposed that adding 5%–10% of the slag modifier to the desulfurization slag after desulfurization decreased the resulfurization effectively. And the added modifier adjusted the slag viscosity well, which helped to reduce iron loss and residual slag.
      PubDate: 2022-06-01
       
  • Particle motion simulation and pulverized coal injection combustion
           simulation of titanomagnetite pellets in rotary kiln for reduction process
           with coal

    • Free pre-print version: Loading...

      Abstract: Abstract The production process of direct reduced iron from titanomagnetite by coal reduction in air in rotary kiln is a key step in the extraction of titanium and iron. This process is conducive to alleviating the stocking problem of a large amount of Ti-bearing blast furnace slag. The relationships between particle movement and pulverized coal injection combustion in rotary kiln were studied by the particle motion simulation and the pulverized coal injection combustion simulation. In particle motion simulation, the repose angle of ore particles was calculated to be 28.06°, and the reaction zone was roughly determined by the reaction temperature isothermal surface and the repose angle; the axial discrete distribution of ore particles would further cause the axial energy fluctuation due to the endothermic nature of the reduction. In pulverized coal injection combustion simulation, the rebound effect of coal injection under gravity would cause local overheating in the rebound region due to the benefits of heat and mass transfer processes, while this could strengthen the reduction reaction of ore particles and cause agglomerate by melting. Two suggestions on weakening the energy fluctuation and agglomerate were proposed based on the characteristics of particle motion and external carbon reaction.
      PubDate: 2022-06-01
       
  • Application of phase-field modeling in solid-state phase transformation of
           steels

    • Free pre-print version: Loading...

      Abstract: Abstract Solid-state phase transformation is usually associated with excellent mechanical properties in steel materials. A deep understanding of the formation and evolution of phase structure is essential to tailor their service performance. As a powerful tool for capturing the evolution of complex microstructures, phase-field simulation quantitatively calculates the phase structures evolution without explicit assumptions about transient microstructures. With the development of advanced numerical technology and computing ability, phase-field methods have been successfully applied to solid-state phase transformation in steels and greatly support the research and development of advanced steel materials. The phase-field simulations of solid-phase transformation in steels were summarized, and the future development was proposed.
      PubDate: 2022-06-01
       
  • Interaction between local corrosion and flow field of natural gas
           long-distance pipeline by artificial rectangular defect pit

    • Free pre-print version: Loading...

      Abstract: Abstract The corrosive environment in long-distance natural gas pipeline was simulated by the online high shear stress flow test platform. The interaction between flow fields and local corrosion in different local corrosion stages was studied by machining different depths rectangular defect pit (RDP) on X80 pipe steel specimens. The electrochemical signals of each specimen under high shear stress flow were measured online using an integrated three-electrode and electrochemical system. Raman spectroscopy confirmed that the corrosion scale of X80 pipeline steel in CO2-saturated National Association of Corrosion Engineers solution was composed of FeCO3. The scanning electron microscope images displayed variations in microstructure of the corrosion scale at different RDP depths and different areas. The flow field fluctuations induced by RDP were analyzed by computational fluid dynamics simulations and the development of local corrosion pits was discussed in terms of integrity of corrosion scale, convective mass transfer, and diffusion mass transfer.
      PubDate: 2022-06-01
       
  • Analysis of longitude profiled rolling process of Cu/Al cladded sheet and
           evaluation of outlet warpage

    • Free pre-print version: Loading...

      Abstract: Abstract Longitude profiled cladded sheet is obtained by rolling bimetal cladded sheet with variable gauge rolling technology. The longitude profiled rolling process of Cu/Al cladded sheets was studied by finite element method and experiments. The rolling force rises with the increase in reduction, and a sudden change appears at the end of the thickness variation zone. The thickness ratio of copper layer is enlarged after rolling owing to its relatively large deformation resistance and continues to rise with the increase in reduction rate. Lower elongation of copper side leads to the warpage of exit metal to copper side, which further hinders the deformation of copper. The influence of asymmetric rolling parameters indicates that increasing the work roll diameter ratio, speed radio, and friction coefficient on Al side can reduce the warpage when the reduction rate is below a certain value depending on the thickness ratio and other rolling parameters. Comparison of experiments and simulation results showed good agreement and verified the finite element model.
      PubDate: 2022-06-01
       
  • Effect of boron on dissolution and repairing behavior of passive film on
           S31254 super-austenitic stainless steel immersed in H2SO4 solution

    • Free pre-print version: Loading...

      Abstract: Abstract The impact of boron on the dissolution and repairing behavior of passive films formed on S31254 super-austenitic stainless steel (SASS) was investigated. SASS was immersed in 0.5 mol/L of H2SO4 for 0, 2, 6, 10, and 14 days to explore the evolution of the passive film. The electrochemical impedance spectroscope (EIS), the Mott–Schottky analysis, and X-ray photoelectron spectroscope were utilized to analyze the semiconductor properties and compositions of the passive films. EIS showed a decrease and consequent increase over 14 days; the same pattern was observed for Cr2O3 and Cr/Fe. However, the defect density of the passive film exhibited a reverse trend. The variation in film thicknesses indicated that the passive films possessed dissolution and repairing behavior. SASS passive film had a double-layer structure; the outer layer was found to be rich in Fe3+ and Cr(OH)3, but low on Mo6+, while the inner layer was rich in Cr2O3 and low in Mo4+. The addition of boron increased the corrosion resistance and could promote the efficiency of the passive film repair, likely by promoting the migration of Mox+, which promoted the repairing of the passive film.
      PubDate: 2022-06-01
       
  • Effects of coke charging pattern on burden movement in COREX melter
           gasifier based on physical simulation

    • Free pre-print version: Loading...

      Abstract: Abstract A three-dimensional semicircle cold model of COREX melter gasifier (MG) was established, and the effects of coke charging pattern on burden movement were investigated by adopting this model. The burden flow pattern of packed bed was measured with different coke charging amounts, coke charging positions, and coke sizes. The results show that the solid flow pattern presents a change from straight line type to reverse U type and finally to W type in MG with traditional coke charging, while the burden flow pattern experiences the change from straight line type to W type with platform and finally W type under center coke charging, and the solid flow pattern presents a change from straight line type to W type with platform and finally W type under intermediate coke charging. The difference demonstrates that coke charging pattern affects the uniform descending in MG to some degree. The burden in the coke charging zone keeps a straight line descending. No matter what kind of coke charging pattern is adopted, the burden residence time is shortened with the increase in coke charging amount, and the vertex of deadman decreases obviously, which is conducive to the renewal of the deadman. The appropriate coke charging amount and coke size should be well controlled at 8.7% and 5 mm, respectively. The results are useful not only in developing further understanding of solid flow in MG but also in verifying different mathematical models, particularly the coupled discrete element method with computational fluid dynamics simulation which has been increasingly used in the literature.
      PubDate: 2022-06-01
       
  • Effect of strain-induced precipitation on microstructure and properties of
           titanium micro-alloyed steels

    • Free pre-print version: Loading...

      Abstract: Abstract The strain-induced precipitation behavior of titanium micro-alloyed steel was examined through the stress relaxation method. In addition, the relationship between strain-induced precipitation and isothermal precipitation was explored. The findings revealed that the strain-induced precipitation and recrystallization processes of titanium micro-alloyed steel coexist and compete at the same time. The results also showed that the recrystallization process was inhibited with strain-induced precipitation. Moreover, a large amount of nano-sized TiC particles precipitated in Ti micro-alloyed steel. Notably, the strain-induced precipitated TiC had a size of 10 nm and isothermally precipitated TiC had a size of 3–6 nm. Additionally, there was a clear competitive relationship between strain-induced precipitation and isothermal precipitation. The findings also showed that strain-induced precipitation had an obvious effect on the refinement of austenite although the effect was not obvious on the increase in the yield strength. Furthermore, isothermal treatment was shown to be more advantageous than strain-induced precipitation. Finally, the major increase in the yield strength was mainly attributed to the precipitation strengthening of nano-sized TiC during isothermal precipitation.
      PubDate: 2022-06-01
       
  • Numerical investigation on particles removal by bubble flotation in
           swirling flow

    • Free pre-print version: Loading...

      Abstract: The removal of particles is of great importance in many fields including effluent treatment, mineral separation, clean metal production, etc. However, most of the researchers paid their attention to the two-phase flow involving gas–liquid or solid–liquid independently. The motion and interaction between bubbles and particles in the swirling three-phase flow field were simulated by discrete phase model. The swirling flow and the collision between bubbles and particles were governed by compiling the user-defined function program. The centripetal pressure gradient force pushes the discrete phases toward the central region, where the collision rate between particle and bubbles is improved greatly. Moreover, it proved beneficially for particle removal to increase the swirling velocity, particularly for larger particles. Thus, bubble flotation is an effective method to remove particles from the fluid. The swirling velocity was optimized, which is valuable for industrial design.
      PubDate: 2022-06-01
       
  • Effect of cyclic quenching treatment on microstructural evolution and
           properties of ductile cast iron

    • Free pre-print version: Loading...

      Abstract: Abstract Due to the coarse grain microstructure and low hardness of ductile cast iron (DCI), this material is unable to meet the performance requirements of bearing structural materials. To obtain ultra-fine-grained and ultra-hardened DCI, the influence of a cyclic quenching treatment on the evolution process and properties of DCI after three cycles of quenching at 860 °C for 30 min was investigated through morphology and grain-size characterization, X-ray diffraction analysis, and mechanical-property determination of DCI. It was found that the microstructure and performance depended strongly on the process of the cyclic quenching. With an increasing number of cycles, the grain size of austenite was significantly refined from 41.2 to 12.3 μm, and the length and width of lath/plate martensite, as well as the lath and twins, are decreased. In the meantime, the morphology of retained austenite changed from blocky to granular, together with the stability increased. The experimental sample obtained a performance with a hardness higher than 60 HRC after cyclic quenching treatment due to the refined grain size and increased dislocation density.
      PubDate: 2022-05-12
       
  • Kinetic triplet from low-temperature carburization and carbon deposition
           reactions

    • Free pre-print version: Loading...

      Abstract: Abstract Carbon deposition reaction is unfavorable for smooth operation of blast furnace, while the product of carburization reaction is a superior iron-bearing raw material in non-blast furnace routes. The kinetic triplet of these two reactions was obtained based on non-isothermal kinetic analysis. According to the Sharp–Wentworth method, the activation energy of the carburization reaction is 397.77 kJ/mol, and the activation energies of the carbon depositions on hematite and magnetite are 188.92 and 100.89 kJ/mol, respectively. The carburization reaction is controlled by the Jander mechanism, and the carbon depositions on hematite and magnetite are both controlled by the mechanism of Zhuravlev–Lesokhin–Tempelman. Based on Coats–Redfern method, the activation energies of the above three reactions are 360.65, 149.29, and 102.36 kJ/mol, respectively. The carburization reaction is a first-order reaction, while the carbon depositions on hematite and magnetite are both third-order reaction. In particular, the negative activation energy is obtained if considering the anti-Arrhenius circumstance in the Sharp-Wentworth method. Based on above results, it is feasible to adopt non-isothermal kinetic method to study the kinetic triplet of a reaction. According to the obtained activation energies and reaction mechanism functions, the simulated kinetic data are in good agreement with the experimental values even using the negative activation energy.
      PubDate: 2022-05-11
       
  • Roll profile electromagnetic control characteristics under roll
           heterogeneity

    • Free pre-print version: Loading...

      Abstract: Abstract The electromagnetic control roll (ECR) and electromagnetic stick (ES) are the core elements and the main driving parts of roll profile electromagnetic control technology (RPECT). To prolong the service life, it is necessary to treat ECR and ES surfaces. According to the heterogeneous characteristics of surface treatments, the roll profile electromagnetic control characteristics were analyzed for different parameters. An electromagnetic-thermal-force coupled axisymmetric finite element model was built to explore the differences in performance as a result of several treatment strategies, and the model was verified by experimental results measured with a roll profile electromagnetic control experimental platform. This model was used to analyze the influence of the heterogeneity of ECR inner hole and ES on the roll crown, the roll profile, the average contact pressure, and the stress state during RPECT process. The results indicate that the heterogeneous layer at ECR inner hole has a restrictive effect on RPECT and that the heterogeneous layer of ES can enhance the profile control ability of RPECT. A reasonable configuration scheme between the heterogeneity of ECR inner hole and the ES can increase the life of ECR and maintain the control ability of RPECT.
      PubDate: 2022-05-09
       
  • Optimization of manganese-rich slag extraction from low-manganese ore
           smelting by response surface methodology

    • Free pre-print version: Loading...

      Abstract: Abstract Manganese-rich slag is a raw material for smelting silicon–manganese alloys using an electric furnace. The blast furnace method is the main method for smelting manganese-rich slag. This method has the problems of a long process, large coke consumption, and easy volatilization of metals such as lead and zinc, which affects smelting safety. A new technology for smelting manganese-rich slag with low-manganese high-iron ore by smelting reduction optimization was proposed. This technology has the advantages of a short process, low energy consumption, low carbon emissions, and comprehensive recycling of lead, zinc, and other metals. According to the chemical composition, X-ray diffraction analysis, and particle size analysis of Cote d’Ivoire low-manganese ore, an experiment was carried out on manganese-rich slag by reduction–smelting separation. Combined with the design scheme of the Box–Behnken principle, three experimental factors (temperature, basicity, and carbon content) were selected as the influences to study. The influence that each factor has on the recovery rate of manganese was studied by response surface methodology, and the experimental factors were optimized. The results show that under the conditions of a reduction-smelting temperature of 1402 °C, basicity of R = 0.10, and carbon content of 10 mass%, the recovery rate of manganese is 97%. A verification experiment was carried out under the optimal conditions, and the error was only 1.24%; this proves that the response surface method prediction model is reliable and accurate. This is of great significance for the comprehensive utilization of lean-manganese ore resources.
      PubDate: 2022-05-08
       
 
JournalTOCs
School of Mathematical and Computer Sciences
Heriot-Watt University
Edinburgh, EH14 4AS, UK
Email: journaltocs@hw.ac.uk
Tel: +00 44 (0)131 4513762
 


Your IP address: 44.192.25.113
 
Home (Search)
API
About JournalTOCs
News (blog, publications)
JournalTOCs on Twitter   JournalTOCs on Facebook

JournalTOCs © 2009-