JournalTOCs

Subjects -> BUILDING AND CONSTRUCTION (Total: 139 journals) - BUILDING AND CONSTRUCTION (131 journals) - CARPENTRY AND WOODWORK (8 journals)
CARPENTRY AND WOODWORK (8 journals)

Showing 1 - 8 of 8 Journals sorted by number of followers
	Wood Material Science & Engineering (Followers: 10)
	Journal of Wood Chemistry and Technology (Followers: 6)
	European Journal of Wood and Wood Products (Followers: 3)
	Wood Science and Technology (Followers: 2)
	Wood and Fiber Science (Followers: 2)
	Journal of The Indian Academy of Wood Science (Followers: 2)
	International Wood Products Journal (Followers: 1)
	IAWA Journal

Most Followed Journals

Top Publishers

Top Subjects

Similar Journals

Wood Material Science & Engineering
Journal Prestige (SJR): 0.402

Citation Impact (citeScore): 1
Number of Followers: 10

Hybrid journal * Containing 9 Open Access article(s) in this issue *
ISSN (Print) 1748-0272 - ISSN (Online) 1748-0280
Published by Taylor and Francis

[2652 journals]

Decay resistance and mechanical strength of poplar wood treated after
injection treatment to living trees using ammoniacal copper
quaternary/carbon dots
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Liang WenZihao WangXuan WangQin XuZhu LiuWanwan ZhaoYaoli ZhangChanglei XiaJianxiong LvLiping Caia Jiangsu Co-Innovation Center of Efficient Processing; Engineering, Nanjing Forestry University, Nanjing, People’s Republic of Chinab Research Institute of Wood Industry of Chinese Academy of Forestry, Beijing, People’s Republic of China
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-29T05:46:12Z
  DOI: 10.1080/17480272.2023.2258854
Status of China’s wooden-door industry and challenges lying ahead
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mei ZhangXianqing XiongXinyi YueXiutong Xua College of Furnishings; Utilization of Forest Resources, Nanjing Forestry University, Nanjing, People’s Republic of China
  Pages: 1 - 14
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-28T06:46:02Z
  DOI: 10.1080/17480272.2023.2261405
Effect of wood adhesive modification with liquefied lignocellulosic
biomass and nanocellulose on the formaldehyde and volatile organic
compounds emissions of particleboards
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Dominika Janiszewska-LatteriniPatrycja Hochmańska-KaniewskaPatrycja Kwaśniewska-SipMagdalena CzajkaMarta PędzikCenter of Wood Technology; Łukasiewicz Research Network-Poznan Institute of Technology, Poznan, Poland
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-25T08:56:01Z
  DOI: 10.1080/17480272.2023.2258119
Assessment of the chipping process of beech (Fagus sylvatica L.) wood:
knives wear, chemical and microscopic analysis of wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jozef KrilekIveta ČabalováEva VýbohováMiroslava MamoňováMiroslava ŤavodováJán MelicherčíkArkadiusz GendekMonika AniszewskaLuigi TodaroValentina Lo Giudicea Faculty of Technology; Department of Environmental Environmental Sciences, University of Basilicata, Potenza, Italy
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-21T08:14:46Z
  DOI: 10.1080/17480272.2023.2259343
Comparison of physico-chemical and thermo-mechanical properties of sungkai
(Peronema canescens Jack.), sengon (Falcataria moluccana (Miq.) Barneby &
J.W. Grimes), and teak (Tectona grandis L.f.) wood veneers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Adik Bahanawan, Yeyen Nurhamiyah, Nissa Nurfajrin Solihat, Widya Fatriasari, Petar Antov, Seng Hua Lee; Innovation Agency (BRIN), Cibinong, Indonesiab Faculty of Forest Industry, University of Forestry, Sofia, Bulgariac Department of Wood Industry, Faculty of Applied Sciences, Universiti Teknologi MARA Pahang Branch Campus Jengka, Pahang, Malaysia
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-13T08:57:04Z
  DOI: 10.1080/17480272.2023.2255166
Characterization of the odorous constituents and chemical structure of
thermally modified rubberwood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tongtong Li, Guanjun Li, Jianing Li, Xiaowen Li, Min Li, Yachao Li; Chinese Academy of Tropical Agricultural Sciences, Rubber Subcenter-National Center of Important Tropical Crops Engineering Technology Research, Haikou, People’s Republic of China
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-12T08:34:00Z
  DOI: 10.1080/17480272.2023.2255571
Micro geometry analysis of WC-Co carbide blades modified with PVD coating
subjected to blunting during milling in chipboard
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Paweł Czarniak, Karol Szymanowski, Janusz Bucki, Dariusz Jarosiewicz; Furniture, Warsaw University of Life Sciences, Warsaw, Polandb Materials Science Faculty, Warsaw University of Technology, Warsaw, Polandc “FABA” S.A, Baboszewo, Poland
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-09-01T01:43:07Z
  DOI: 10.1080/17480272.2023.2251026
Determination of a mass-transfer coefficient for wood drying by means of
thermography
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Peter Lerman, Gerhard Scheepers; Wood Technology, Linnaeus University, Växjö, Swedenb RISE Research Institutes of Sweden, Växjö, Sweden
  Pages: 1 - 8
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-29T09:33:54Z
  DOI: 10.1080/17480272.2023.2243473
Axial compressive behavior of transversely reinforced bamboo winding tubes
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Haitao Li, Xinqi Shen, Bingyu Jian, Wenjing Zhou, Ottavia Corbi; Nanjing Forestry University, Nanjing, People’s Republic of Chinab College of Civil Engineering, Nanjing Forestry University, Nanjing, People’s Republic of Chinac Joint International Research Laboratory for Bio-composite Building Materials Structures, Nanjing Forestry University, Nanjing, People’s Republic of Chinad University of Naples Federico II Naples, Italy
  Pages: 1 - 16
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-25T07:38:53Z
  DOI: 10.1080/17480272.2023.2246942
Preparation of the water-resistant eco-friendly carbohydrate wood
adhesives by Schiff base reaction
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Qianyu Zhang, Jiaxuan Song, Hong Lei, Antonio Pizzi, Guanben Du, Xuedong Xi; Material Engineering, Zhejiang A&F University, Hangzhou, People’s Republic of Chinad LERMAB, University of Lorraine, Epinal, France
  Pages: 1 - 4
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-24T08:39:34Z
  DOI: 10.1080/17480272.2023.2238261
Influence of WC-Co knifes pre-treatment with drag finishing method
subjected to tool coatings deposition on blunting process
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Paweł Czarniak, Karol Szymanowski, Peter Panjan, Dariusz Jarosiewicz; Institute of Wood Sciences Furniture, Warsaw, Polandb Jožef Stefan Institute, Ljubljana, Sloveniac “FABA” S.A, Baboszewo, Poland
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-22T05:47:38Z
  DOI: 10.1080/17480272.2023.2248471
Decay resistance and weathering properties of thermally-modified amazon
woods – Parkia pendula (Willd.) and Simarouba amara (Aubl.)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Leonardo Vinícius de Souza, Diego Martins Stangerlin, Rafael Rodolfo de Melo, Aylson Costa Oliveira, Alexandre Santos Pimenta; Cuiabá, Mato Grosso, Brazilb Federal University of the Semi-Arid Region–UFERSA, Costa e Silva, Mossoró-RN, Brazilc Federal University of Rio Grande do Norte – UFRN, Distrito de Jundiaí, Macaíba-RN, Brazil
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-18T10:51:27Z
  DOI: 10.1080/17480272.2023.2242823
Predicting the mechanical properties of timber from existing structures by
the longitudinal vibration method, visual grading and definition of the
nominal cross-section
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Carlos Osuna-Sequera, Francisco Arriaga, Daniel F. Llana, Guillermo Íñiguez-González; Natural Resources), Universidad Politécnica de Madrid, Madrid, Spainb Timber Construction Research Group, Universidad Politécnica de Madrid, Madrid, Spainc Department of Forest Products, INIA-ICIFOR, Madrid, Spain
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-17T08:10:04Z
  DOI: 10.1080/17480272.2023.2243673
Mathematical description of the operating temperature in regimes for
autoclave steaming and subsequent air conditioning of wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nencho Deliiski, Peter Niemz, Pavlin Vitchev, Dimitar Angelski, Natalia Tumbarkova; Faculty of Forest Industry, University of Forestry, Sofia, Bulgariab Institute for Building Materials, ETH Zürich, Zürich, Switzerlandc Wood Science Engineering, Luleå University of Technology, Skellefteå, Swedend Department of Furniture Production, Faculty of Forest Industry, University of Forestry, Sofia, Bulgaria
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-16T11:51:08Z
  DOI: 10.1080/17480272.2023.2240746
Study of mass transfer and hygroscopic properties of Australian
mass-timber panels and species in hot and humid conditions- moisture
sorption and desorption
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Maryam Shirmohammadi; Fisheries, Queensland Government, Brisbane, Australia
  Pages: 1 - 15
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-09T08:59:51Z
  DOI: 10.1080/17480272.2023.2235566
An X-ray CT assessment of fungal growth in spruce, poplar and
thermally-modified poplar
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiuping Jiang, Jan Van den Bulcke, Joris Van Acker, Liselotte De Ligne; Department of Environment, Faculty of Bioscience Engineering, Ghent University, Ghent, Belgiumb UGCT – UGent Center for X-Ray Tomography, Gent, Belgiumc College of Materials Science Engineering, Nanjing Forestry University, Nanjing, People’s Republic of China
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-08T09:06:25Z
  DOI: 10.1080/17480272.2023.2243464
Preparation of hydrophobic coating by phytic acid-based hybrid complexes
to enhance the surface property of wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Longchao Ma, Yihan Zhao, Tao Zhang, Xinzhou Wang, Meiling Chen, Liang Chen, Yanjun Li; Forestry University, Hangzhou, People’s Republic of Chinac Guangxi Rongshui Chenyang Wood Industry Co., Ltd, Liuzhou, People’s Republic of China
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-07T05:19:00Z
  DOI: 10.1080/17480272.2023.2243045
Kinetics and thermodynamics of beech wood pyrolysis mechanism
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Muhammad Azeem Arshad; University of the Punjab, Lahore, Pakistan
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-03T05:12:06Z
  DOI: 10.1080/17480272.2023.2242827
Evaluation of flammability for bamboo products treated with water-soluble
flame retardants
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiazhen Li, Siyang Ji, Qunying Mou, Zhangjing Chen, Xianjun Li; Technology, Changsha, People’s Republic of Chinac Department of Sustainable Biomaterials, Virginia Tech University, Blacksburg, VA, USA
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-02T08:00:59Z
  DOI: 10.1080/17480272.2023.2241036
Selection of wooden furniture joints with multi-criteria decision-making
techniques
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kıvanç Yilmaz, Erol Burdurlu; Faculty of Technology, Gazi University, Ankara, Turkeyb Department of Wood Products Industrial Engineering, School of Vocational Technology, Hacettepe University, Ankara, Turkey
  Pages: 1 - 16
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-08-02T03:39:42Z
  DOI: 10.1080/17480272.2023.2242329
Recent advances of nanotechnology in wood protection: a comprehensive
review
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: R. Athulya, J. Nandini, Tanmaya Kumar Bhoi, R. Sundararaj; ICFRE-Institute of Wood Science Technology (ICFRE-IWST), Bengaluru, Indiab Forest Protection Division, ICFRE-Arid Forest Research Institute (ICFRE-AFRI), Jodhpur, India
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-31T07:37:13Z
  DOI: 10.1080/17480272.2023.2239800
Delignified wood biocomposites as sustainable and transparent materials
for passive cooling applications
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Laurentius Kevin Hendinata, Nur Abdillah Siddiq, Sentagi Sesotya Utami, Ahmad Ilham Rokhul Fikri, Michael Alfano Suprapto, Ribka Prilia; Engineering Physics, Universitas Gadjah Mada, Yogyakarta, Indonesia
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-31T07:34:55Z
  DOI: 10.1080/17480272.2023.2240295
Vibroacoustic properties as a function of crystallinity changes in
heat-treated Pinus radiata D. Don wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: A. Rolleri, M. Wentzel, A. Aguilera, J. L. Barros; Facultad de Ciencias Forestales y Recursos Naturales, Universidad Austral de Chile, Valdivia, Chileb Instituto de Acústica, Facultad de Ciencias de la Ingeniería, Universidad Austral de Chile, Valdivia, Chile
  Pages: 1 - 6
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-25T07:51:55Z
  DOI: 10.1080/17480272.2023.2236960
Creep performance and analysis of glass fiber reinforced glulam beams
under the influence of climatic conditions
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yo-Jin Song, In-Hwan Lee, Soon-Il Hong; Kangwon National University, Chuncheon-Si, South Koreab Wood Engineering Division, Forest Products Industry Department, National Institute of Forest Science, Seoul, South Koreac Department of Forest Biomaterials Engineering, Kangwon National University, Chuncheon-Si, South Korea
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-21T10:51:53Z
  DOI: 10.1080/17480272.2023.2235677
Effects of accelerated aging on compressive response of natural and
synthetic core materials: freeze-thaw cycles and UV radiation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Claudia Sergi, Fabrizio Sarasini, Anna Candida Felici, Maria Paola Bracciale, Jacopo Tirillò; Sapienza Università di Roma Applied Sciences for Engineering, Sapienza Università di Roma, Rome, Italy
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-21T10:43:48Z
  DOI: 10.1080/17480272.2023.2236988
Effect of tip path overlap on ring debarker performance of frozen and
unfrozen black spruce logs
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wassim Kharrat, Roger. E. Hernández, Claudia. B. Cáceres; Département des sciences du bois et de la forêt, Université Laval, Quebec City, Canada
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-20T07:45:34Z
  DOI: 10.1080/17480272.2023.2237492
Effect of pretreatment and compaction ratio on the properties of oriented
strand board from sengon (Paraserianthes falcataria L. Nielsen) wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Muhammad Iqbal Maulana, Fadilah Fitrianum, Derisna Noviyanti, Refany Audy, Denni Prasetia, Sena Maulana, Muhammad Adly Rahandi Lubis, Wahyu Hidayat, Rita Kartika Sari, Fauzi Febrianto, Nam Hun Kim; Environmental Science, Kangwon National University, Chuncheon, Republic of Koread Forestry Engineering Studi Program, Institut Teknologi Sumatera (ITERA), South Lampung, Indonesiae Department of Forestry, Faculty of Agriculture, Lampung University, Bandar Lampung, Indonesia
  Pages: 1 - 14
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-17T03:43:45Z
  DOI: 10.1080/17480272.2023.2233952
Mechanical properties of Norway spruce (Picea abies) infested by the bark
beetle (Ips typographus)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tina Künniger, Roman Elsener, Markus Heeb, Anja Huch; Empa, Dübendorf, Switzerland
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-11T09:28:57Z
  DOI: 10.1080/17480272.2023.2226644
Bamboo scrimber production: optimization of post-impregnation drying
process using a heat pump dryer
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ershan Liang, Xiuyi Lin, Jiaqi He, Qiaofang Zhou, Xianju Wang, Chuanshuang Hu, Dengyun Tu; Energy, South China Agricultural University, Guangzhou, People’s Republic of China2 College of Electronic Engineering, South China Agricultural University, Guangzhou, People’s Republic of China
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-11T09:26:55Z
  DOI: 10.1080/17480272.2023.2233086
Multi-objective optimization of sawblade multi-spot pressure tensioning
process based on backpropagation neural network and genetic algorithm
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mingyang Yu, Bin Wang, Pengliang Ji, Bo Li, Luo Zhang, Qingdong Zhang; University of Science Technology Beijing, Beijing, People’s Republic of Chinab Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing, People’s Republic of Chinac AVIC Changhe Aircraft Industry (Group) Corporation Ltd, Jiangxi, People’s Republic of China
  Pages: 1 - 17
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-11T09:26:43Z
  DOI: 10.1080/17480272.2023.2233163
Numerical analysis of buckling behaviour of timber-encased steel composite
columns under axial compression
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Feiyang Xu, Xinmiao Meng, Qibin Hu, Ying Gao; Technology, Beijing Forestry University, Beijing, People’s Republic of Chinab Department of Civil Engineering, Beijing Forestry University, Beijing, People’s Republic of Chinac Faculty of Engineering, University of Alberta, Edmonton, Canada
  Pages: 1 - 19
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-07T11:04:03Z
  DOI: 10.1080/17480272.2023.2228272
Wood chatoyance within different species
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Paolo Pisani, Laura Zanetta, Davide Codoro; Saronno, Italyb Employee within the Pharmaceutical Industry, Saronno, Italyc Employee within the Telecommunication Industry, Saronno, Italy
  Pages: 1 - 16
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-07T11:00:10Z
  DOI: 10.1080/17480272.2023.2225048
Experimental and theoretical study on axial compression behavior of
cold-formed thin-walled steel-bamboo scrimber composite columns
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiuhua Zhang, Taotao Wen, Jing E; Transportation, Northeast Forestry University, Harbin, People’s Republic of China
  Pages: 1 - 14
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-07T10:58:55Z
  DOI: 10.1080/17480272.2023.2231403
The sawmill yield increase potential with manufacturing increased wane and
random width boards for engineered wood products
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Bruno Monteiro Balboni, Sylvester T. Chatukuta, Barry Muller, C. Brand Wessels; Wood Science, Stellenbosch University, Stellenbosch, South Africab School of Natural Resource Management, Nelson Mandela University, George, South Africa
  Pages: 1 - 8
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-07T10:58:38Z
  DOI: 10.1080/17480272.2023.2229279
Axial stress–strain behaviour of bamboo composite tube-confined recycled
aggregate concrete with different aggregate replacement ratios
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yang Wei, Yuhan Nie, Yu Lin, Dongjie Shen, Gaofei Wang; Nanjing Forestry University, Nanjing, People’s Republic of Chinab School of Civil Engineering, Southeast University, Nanjing, People’s Republic of China
  Pages: 1 - 17
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-06T06:17:51Z
  DOI: 10.1080/17480272.2023.2229275
Environmentally friendly protection of European beech against fire and
fungal decay using a combination of thermal modification and
mineralisation
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rožle Repič, Andreja Pondelak, Davor Kržišnik, Miha Humar, Nataša Knez, Friderik Knez, Andrijana Sever Škapin; Slovenian National Building Civil Engineering Institute, Ljubljana, Sloveniab Biotechnical Faculty, University of Ljubljana, Ljubljana, Sloveniac Faculty of Polymer Technology - FTPO, Slovenj Gradec, Slovenia
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-05T09:20:30Z
  DOI: 10.1080/17480272.2023.2223508
The effect of growth-ring orientation on the compressive performance of
Douglas fir
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wanzhao Li, Kai Yang, Ye Zhang, Jiangtao Shi, Jan Van den Buckle, Joris Van Acker; Engineering, Nanjing Forestry University, Nanjing, People’s Republic of Chinac UGent-Woodlab, Laboratory of Wood Technology, Department of Environment, Faculty of Bioscience Engineering, Ghent University Ghent, Belgium
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-07-04T08:05:19Z
  DOI: 10.1080/17480272.2023.2228750
Analysis of the lamella dimensions of the bed slat for the bariatric
respondent: A modelling approach
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Miloš Hitka, Rastislav Lagaňa, Milan Naď, Ivan Klement, Maciej Sydor; Management Wood Technology, Poznań University of Life Sciences, Poznań, Poland
  Pages: 1 - 8
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-29T09:00:40Z
  DOI: 10.1080/17480272.2023.2221792
Machinability of plantation-grown Eucalyptus globoidea timber
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hamish Scown, Hyungsuk Lim, Clemens Altaner; University of Canterbury, Christchurch, New Zealand
  Pages: 1 - 6
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-29T08:59:25Z
  DOI: 10.1080/17480272.2023.2222700
Differences of technological properties on sapwood and heartwood of short
rotation teak wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Resa Martha, Mahdi Mubarok, Firmin Obounou Akong, Béatrice George, Istie Sekartining Rahayu, Christine Gérardin, Stéphane Dumarçay, Wayan Darmawan, Philippe Gérardin; Université de Lorraine, Vandoeuvre-lès-Nancy Cedex, Franceb Department of Forest Products, Faculty of Forestry Environment, IPB University, Bogor, Indonesia
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-28T08:05:40Z
  DOI: 10.1080/17480272.2023.2221678
Bond-line strength, chemical properties and cellulose crystallinity of
welded pine and itauba wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ana Carolina Costa Viana, Carlos Eduardo Maduro de Campos, Poliana Dias de Moraes, Walter Lindolfo Weingaertner; Department of Civil Engineering, Federal University of Santa Catarina, Florianópolis, Brazilb X-ray Diffraction Laboratory (LDRX), Department of Physics, Federal University of Santa Catarina, Florianópolis, Brazilc Precision Mechanical Laboratory (LMP), Department of Mechanical Engineering, Federal University of Santa Catarina, Florianópolis, Brazil
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-28T06:25:34Z
  DOI: 10.1080/17480272.2023.2225043
Analysis of surface roughness of chemically impregnated Scots pine
processed using frame-sawing machine
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Daniel Chuchala, Kazimierz A. Orlowski, Salim Hiziroglu, Aleksandra Wilmanska, Aleksandra Pradlik, Karolina Mietka; EkoTech Center, Gdansk University of Technology, Gdansk, Polandb Department of Natural Resource Ecology & Management, Oklahoma State University, Stillwater, OK, USAc Aptiv Services Poland S.A., Plant in Gdansk, Gdansk, Polandd Eco – Constructions Sp. z o.o., Gościcino, Poland
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-27T05:02:37Z
  DOI: 10.1080/17480272.2023.2221655
Mode I fracture properties of thermally-modified spruce wood (Picea abies)
at different moisture contents
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Miran Merhar, Rostand Moutou Pitti, Tom Argensse; Department of Wood Science Technology, University of Ljubljana, Ljubljana, Sloveniab Université Clermont Auvergne, Clermont Auvergne INP, CNRS, Institut Pascal, Clermont Ferrand, France
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-25T09:11:00Z
  DOI: 10.1080/17480272.2023.2228280
Additive manufactured acoustic absorbers made of wood-fiber composites
with modified infill patterns
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Vignesh Sekar, Azma Putra, Sabarinathan Palaniyappan, Se Yong Eh Noum, Sivakumar Sivanesan, Yu Lih Jiun; Saveetha Engineering College, Chennai, Indiab Centre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, Malaysiac Centre for Molecular Medicine Innovation, Kuala Lumpur, Malaysiae Faculty of Enginnering, Technology & Built Environment, UCSI University, Kuala Lumpur, Malaysia
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-25T09:08:03Z
  DOI: 10.1080/17480272.2023.2227604
Phenotyping wood properties of Corymbia torelliana x Corymbia citriodora
and Eucalyptus dunnii based on NIR spectra
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Leticia Miranda, Evandro Vagner Tambarussi, Regiane Abjaud Estopa, Fernanda Maria Guedes Ramalho, Flaviana Reis Milagres, Paulo Ricardo Gherardi Hein; Telêmaco Borba, Brazilb Universidade Estadual do Centro-Oeste, Irati, Brazilc Universidade Estadual Paulista, Botucatu, Brazild Universidade Federal de Lavras, Lavras, Brazil
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-25T09:06:53Z
  DOI: 10.1080/17480272.2023.2228266
Enhanced removal of Cu(II) ions from aqueous solution by in-situ synthesis
of zeolitic imidazolate framework-67@wood aerogel composite adsorbent
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gang Zhu, Chaoling Zhang, Kaiqian Li, Xupeng Zhang, Shuduan Deng; Glued Product, Southwest Forestry University, Kunming, People’s Republic of China
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-22T08:59:42Z
  DOI: 10.1080/17480272.2023.2223557
Study on mechanical behavior of modified wood chips reinforced
cementitious composites and reinforcing mechanism of wood chips from the
perspective of energy
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ziqiang Liu, Yushu Wang, Chunpeng Han; Northeast Forestry University, Harbin, People’s Republic of China
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-20T09:04:01Z
  DOI: 10.1080/17480272.2023.2221209
Wood veneer strips as reinforcement for cement-bonded particleboards
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lukas Günther, Christof Schröfl, Martin Direske; Dresden, Germanyb Institut of Construction Materials, TU Dresden, Germany
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-13T07:15:16Z
  DOI: 10.1080/17480272.2023.2213675
Development of plywood bonded with a novel adhesive film made from
polystyrene foam waste dissolved in D-limonene
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Habib Noori, Ali Shalbafan, Saeed Kazemi-Najafi; Marine Sciences, Tarbiat Modares University, Noor, Iran
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science & Engineering
  PubDate: 2023-06-11T08:23:45Z
  DOI: 10.1080/17480272.2023.2221220
Biological resistance of Phoenician juniper wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Charalampos Lykidis, Miklos Bak, George I. Mantanis; Faculty of Forestry Design, University of Thessaly, Karditsa, Greece
  Pages: 1 - 5
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-06-09T06:51:17Z
  DOI: 10.1080/17480272.2023.2221657
Ultrasonic pulse velocity for mechanical properties determination of wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Soheil Palizi, Vahab Toufigh, Moein Ramezanpour Kami; Sharif University of Technology, Tehran, Iran
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-30T07:22:53Z
  DOI: 10.1080/17480272.2023.2208556
Comparative study on weathering resistance of transparent wood infiltrated
with three different polymers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kaiwen Chen, Xianfu Xiao, Baoming Deng, Hui Peng, Tianyi Zhan, Jianxiong Lyu; Utilization of Forest Resources, Nanjing Forestry University, Nanjing, People’s Republic of Chinac Research Institute of Wood Industry of Chinese Academy of Forestry, Beijing, People’s Republic of China
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-25T08:27:36Z
  DOI: 10.1080/17480272.2023.2215219
A hybrid mathematical model for international target market decision: the
case of fibreboard industry
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Murat Yeşilkaya, Yıldız Çabuk; Tokat Gaziosmanpaşa University, Niksar, Tokat, Turkeyb Faculty of Forestry, Department of Forest Industrial Engineering, Bartın University, Bartın, Turkey
  Pages: 1 - 16
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-22T11:44:16Z
  DOI: 10.1080/17480272.2023.2212267
Supervised classification of wood species during milling based on
extracted cut events from ultrasonic air-borne acoustic signals
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mehieddine Derbas, Stephan Frömel-Frybort, Christian Laaber, Hans-Christian Möhring, Martin Riegler; Life Sciences (BOKU), Vienna, Austriac HTBLuVA Mödling, Mödling, Austriad Laaber GmbH, Wiener Neudorf, Austriae Institute for Machine Tools, University of Stuttgart, Stuttgart, Germany
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-22T11:42:30Z
  DOI: 10.1080/17480272.2023.2214118
Risk prevention of plywood product defects using Failure Mode Effect
Analysis (FMEA) in the Indonesian plywood processing industry
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Herdiana Dyah Susanti; University of 17 Agustus 1945 Banyuwangi, Banyuwangi, Indonesia
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-22T11:41:56Z
  DOI: 10.1080/17480272.2023.2214527
The effects of urea-formaldehyde resin and paraffin contents on fluid flow
(air and water) and physico-mechanical properties of medium-density
fibreboards
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hamid R. Taghiyari, Petar Antov, Elham Nadali, Seng Hua Lee, Gholamreza Samkhaniani, Maria Kokorska; Faculty of Materials Engineering & New Technologies, Shahid Rajaee Teacher Training University, Tehran, Iranb Department of Mechanical Wood Technology, Faculty of Forest Industry, University of Forestry, Sofia, Bulgariac Ph.D. Graduate from the Department of Wood & Paper Science Furniture Design, Faculty of Forest Industry, Sofia, Bulgaria
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-17T09:38:25Z
  DOI: 10.1080/17480272.2023.2212257
Effect of thermo-vacuum modification on selected chemical, physical, and
mechanical properties of Siberian larch (Larix sibirica L.) wood
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Valentina Lo Giudice, Petar Antov, Daniel Koynov, Lubos Kristak, Seng Hua Lee, Muhammad Adly Rahandi Lubis, Marisabel Mecca, Nicola Moretti, Rupali Tiwari, Luigi Todaro; Forest, Food Universitas Padjadjaran, Jatinangor, Indonesiag Institute of Physics, Slovak Academy of Sciences, Bratislava, Slovakia
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-15T10:05:42Z
  DOI: 10.1080/17480272.2023.2212253
Reduction of the corrosion potential of wood for application in the museum
environment
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Axel Mund, Anja Kampe, Lothar Clauder, Alexander Pfriem; Faculty of Wood Engineering, Eberswalde, Germany
  Pages: 1 - 6
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-15T10:01:36Z
  DOI: 10.1080/17480272.2023.2208101
Decay resistance of bifenthrin-propiconazole-treated laminated bamboo
lumber
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: B. U. Kelkar, S. R. Shukla; Technology, Bengaluru, India
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-12T04:02:48Z
  DOI: 10.1080/17480272.2023.2194858
Development of extraction methodology for identification of

Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Eli Keržič, Miha Humar, Primož Oven, Viljem Vek; Department of Wood Science Technology, University Ljubljana, Ljubljana, Slovenia
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-08T07:12:12Z
  DOI: 10.1080/17480272.2023.2207529
The mechanical performance evaluation of recombinant bamboo with weakened
metal connections under low-cyclic loading
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yi Su, Jun Zou, Hao Shi; Nanjing Forestry University, Nanjing, People’s Republic of China
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-05T08:03:51Z
  DOI: 10.1080/17480272.2023.2208562
Fire resistance of pine wood treated with phenol-formaldehyde resin and
phosphate-based flame retardant
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Muting Wu, Lukas Emmerich, Katarzyna Kurkowiak, Holger Militz; Wood Biology Wood Products, University of Goettingen, Goettingen, Germany
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-04T06:07:50Z
  DOI: 10.1080/17480272.2023.2205379
Influence of knots on the adhesion of wood from young Eucalyptus grandis
plantations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Bruno Monteiro Balboni, C. Brand Wessels, Marcelo Leite Ribeiro, Alessandra Silva Batista, José Nivaldo Garcia; University of São Paulo, Piracicaba, Brazilb Department of Forest Wood Science, Stellenbosch University, Stellenbosch, South Africac Department of Aeronautical Engineering, University of São Paulo, São Carlos, Brazil
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-02T05:35:54Z
  DOI: 10.1080/17480272.2023.2208094
Hydrothermal treatment-induced changes in wood iron concentrations and
colour: a technological study
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mindaugas Škėma, Iveta Varnagirytė-Kabašinskienė, Marius Aleinikovas, Lina Beniušienė, Benas Šilinskas; Lithuanian Research Centre for Agriculture Forestry (LAMMC), Girionys, Lithuania
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-05-02T05:32:47Z
  DOI: 10.1080/17480272.2023.2195393
Dynamic moisture sorption and humidity response inside the wooden space to
cyclical changing external relative humidity
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tiantian Yang, Changtong Mei, Shuwen Qian; Utilization of Forest Resources, Nanjing Forestry University, Nanjing, People’s Republic of China
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-28T02:05:41Z
  DOI: 10.1080/17480272.2023.2204069
Dynamic tests on a long-span, stressed-skin, timber floor
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: J. Bjerve, E. Sagerud, H. Stamatopoulos, K.A. Malo, A. Rønnquist; Norwegian University of Science Technology, Trondheim, Norway
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-19T10:42:40Z
  DOI: 10.1080/17480272.2023.2197857
Moisture performance of various wooden shingles designs tested on the
Golobar cable yarding
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Miha Humar, Boštjan Lesar, Davor Kržišnik; Technology, Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-18T05:10:54Z
  DOI: 10.1080/17480272.2023.2199714
Application of lignocellulosic composite (Taiwan incense-cedar) for
digital light processing (DLP) in 3D printing
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Meng-Ting Tsai, Pei-Chen Wang; National Taiwan University of Science Technology, Taipei, Taiwan
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-13T07:25:17Z
  DOI: 10.1080/17480272.2023.2199018
The deterioration state and degradation mechanism of historical timber
structures from the Yunnan Military Academy
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gang Dong, Bozhi Zhang, Jiyun Qi, Haoli Yuan, Yijun Zhou, Bei Luo, Shuduan Deng, Yan Xia; Physical Sciences, Brunel University London, Uxbridge, UK
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-11T05:46:12Z
  DOI: 10.1080/17480272.2023.2198498
Surface carbonization of wood: comparison of the biological performance of
Pinus taeda and Eucalyptus bosistoana woods modified by contact charring
method
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ekim Elçin Soytürk, S. Nami Kartal, Rachel A. Arango, Katie M. Ohno, Edanur Solhan, İclal Çağlayan, Claudia Marcela Ibanez; Dept of Forest Biology Wood Protection Technology, Istanbul University-Cerrahpaşa, Istanbul, Turkeyb USDA Forest Service Forest Products Laboratory, Madison, WI, USAc Faculty of Forestry, Forest Industrial Engineering, Istanbul University-Cerrahpaşa, Istanbul, Turkeyd Instituto Superior de Estudios Forestales, Sede Tacuarembó, Cenur Noreste, Universidad de la República, Montevideo, Uruguay
  Pages: 1 - 12
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-10T07:32:43Z
  DOI: 10.1080/17480272.2023.2198993
Experimental investigations on the bearing properties of bamboo scrimber
joints by a bolted bamboo-steel-bamboo connection
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Qi Cao, Yang Wei, Yu Lin, Mingmin Ding, Kaiqi Zheng; Nanjing Forestry University, Nanjing, People’s Republic of China
  Pages: 1 - 19
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-04-03T08:17:53Z
  DOI: 10.1080/17480272.2023.2193816
Chromatic aberration and decay resistance performance of bamboo and bamboo
scrimber decayed by white-rot and brown-rot fungi
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Huimin Zhang, Yahua Jiang, Yu Liu, Quan Li; Ornamental Horticulture of Suqian, Suqian University, Suqian, People’s Republic of China
  Pages: 1 - 7
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-28T02:00:53Z
  DOI: 10.1080/17480272.2023.2193822
Comparison of tensioning effect between roll and multi-spot pressure
tensioning process of circular sawblade
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mingyang Yu, Bin Wang, Luo Zhang, Bo Li, Qingdong Zhang; University of Science Technology Beijing, Beijing, PR Chinab Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing, PR Chinac AVIC Changhe Aircraft Industry (Group) Corporation Ltd, Jiangxi, PR China
  Pages: 1 - 14
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-27T07:12:24Z
  DOI: 10.1080/17480272.2023.2193819
Influence of cutting parameters on the tool life for WC-Co composites in
the machining of wood-based materials
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Joanna Wachowicz, Jacek Wilkowski, Szymon Talarek; Institute of Wood Sciences Furniture, Warsaw University of Life Science – SGGW, Warsaw, Poland
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-21T12:59:53Z
  DOI: 10.1080/17480272.2023.2191219
Effect of hot-pressing and hydrothermal parameters on recycled wood
particles and particleboards
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lidong Shi, Chuanshuang Hu, Weiwei Zhang, Xiuyi Lin; Energy, South China Agricultural University, Guangzhou, People’s Republic of China
  Pages: 1 - 8
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-15T09:01:25Z
  DOI: 10.1080/17480272.2023.2186262
Impregnation of Norway spruce with low melting-point binary fatty acid as
a phase-change material
Open Access Article
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: J. Grzybek, Z. Paschová, P. Meffert, A. Petutschnigg, T. Schnabel; Salzburg University of Applied Sciences, Kuchl, Austria2 Faculty of Forestry Wood Engineering, Transilvania University of Brasov, Brasov, Romania
  Pages: 1 - 10
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-15T09:01:25Z
  DOI: 10.1080/17480272.2023.2186266
Acoustic properties of glued laminated bamboo and spruce-pine-fir
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Youbohong Kong, Jie Wen, Anxu Huang, Lejun Zhou, Yan Xiao; Zhejiang University, Haining, People’s Republic of China2 Center for Balance Architecture, the Architectural Design & Research Institute of Zhejiang University Co, Ltd., Hangzhou, People’s Republic of China3 Department of Civil Environmental Engineering, University of Southern California, Los Angeles, CA, USA
  Pages: 1 - 15
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-13T03:19:26Z
  DOI: 10.1080/17480272.2023.2187318
Impact of visible knots on relative visual attractiveness of furniture
fronts made of pine wood (Pinus sylvestris L.)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Katarzyna Śmietańska, Jarosław Górski; Furniture, Warsaw University of Life Sciences (WULS) Warsaw, Poland
  Pages: 1 - 6
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-09T05:58:43Z
  DOI: 10.1080/17480272.2023.2186263
Increasing efficiency of an industrial robot when machining timber beams
– introduction of a parametric solving model to determine optimised
stacks
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Marc Pantscharowitsch, Jakob Witzeneder, Benjamin Kromoser; Life Sciences Vienna (BOKU), Vienna, Austria
  Pages: 1 - 17
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-08T07:15:23Z
  DOI: 10.1080/17480272.2023.2183897
The effect of laminate configuration on the mechanical properties of model
glued-laminated timber composed of single and mixed tropical fast-growing
tree species
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Agus Ngadianto, Futoshi Ishiguri, Ikumi Nezu, Denny Irawati, Jyunichi Ohshima, Shinso Yokota; Utsunomiya University, Utsunomiya, Japanb United Graduate School of Agricultural Science, Tokyo University of Agriculture Technology, Fuchu, Tokyo, Japanc Vocational College, Universitas Gadjah Mada, Yogyakarta, Indonesiad Faculty of Forestry, Universitas Gadjah Mada, Yogyakarta, Indonesia
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-03-06T11:57:04Z
  DOI: 10.1080/17480272.2023.2175254
An experimental and theoretical analysis of the dynamic response of solar
drying in natural convection under rainy month of Maroua (Cameroon) of
three tropical wood species
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tanenbé Teussingka, Merlin Simo-Tagne, Jacques Michel Njankouo, Gambo Betchewe, Macmanus Chinenye Ndukwu, Nnaemeka Reginald Nwakuba, Naoual Bekkioui, André Zoulalian; The University of Maroua, Maroua, Cameroonb Wood Engineering Department, Higher Technical Teacher’s Training College, University of Ebolowa, Ebolowa, Cameroonc University of Lorraine, INRAE, LERMAB, ERBE – F, Epinal, Franced CFA – CFPPA of Mirecourt, Mirecourt, Francee Department of Agricultural Techniques, University of Lorraine, Vandoeuvre-lès-Nancy, France
  Pages: 1 - 21
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-02-20T09:28:03Z
  DOI: 10.1080/17480272.2023.2178030
Changes in chemical composition, crystallinity, and microstructure of wood
fiber mat-reinforced composite caused by white-rot fungus Trametes
versicolor and brown-rot fungus Gloeophyllum trabeum
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Minzhen Bao, Weigang Zhang, Lihui He, Yongjie Bao, Zaixing Wu, Wenji Yu, Yuhe Chen, Neng Li; China National Bamboo Research Center, Hangzhou, People’s Republic of Chinab School of Engineering, Zhejiang Agricultural Technology Innovation Testing Technology Research Institute, Hangzhou, People’s Republic of Chinad Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing, People’s Republic of China
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-02-20T09:27:29Z
  DOI: 10.1080/17480272.2023.2180431
A comparison study on methylene-blue adsorption between moso bamboo fiber
and parenchyma cells
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jiulong Xie, Huijuan Shao, Yongze Jiang, Jinqiu Qi, Shaobo Zhang, Hui Xiao, Yuzhu Chen, Shanshan Jia, Xingyan Huang, Qi Chen; Sichuan Agricultural University, Chengdu, People’s Republic of Chinab Wood Industry Furniture Engineering Key Laboratory of Sichuan Provincial Department of Education, Chengdu, People’s Republic of China
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-02-16T05:17:34Z
  DOI: 10.1080/17480272.2023.2178972
Paulownia (Paulownia elongata S.Y.Hu) – importance for forestry and a
general screening of technological and material properties
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Christian Huber, David Moog, Robert Stingl, Maximilian Pramreiter, Alexander Stadlmann, Georg Baumann, Gabriel Praxmarer, Roland Gutmann, Herfried Eisler, Ulrich Müller; Economic Sciences, Vehicle Safety Institute, Graz University of Technology, Graz, Austriad Plantownia GesbR, Bairisch Kölldorf, Austria
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-02-04T01:25:24Z
  DOI: 10.1080/17480272.2023.2172690
Study the effects of ferrous materials inside wood on the propagation
characteristics of acoustic emission signals
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ning Xu, Ming Li, Saiyin Fang, Changlin Huang, Yue Zhao, Feilong Mao, Gezhou Qin, Tingting Deng, Yuan Wang; Intelligent Control of High-end Equipment of Ministry of Education, Anhui Polytechnic University, Wuhu, People’s Republic of Chinac School of Electrical Engineering, Anhui Polytechnic University, Wuhu, People’s Republic of China
  Pages: 1 - 13
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-02-02T06:17:19Z
  DOI: 10.1080/17480272.2023.2171808
Effects of physical parameters on the temperature and vapor-pressure
behavior of bamboo scrimber during hot-pressing
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tong Lu, Yanglin Ge, Chenfei Zhou, Yiming Ren, Mingyun He, Kang Xu, Xianjun Li; Technology, Changsha, People’s Republic of China
  Pages: 1 - 9
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-01-27T06:29:26Z
  DOI: 10.1080/17480272.2023.2169633
A novel method and validation for obtaining the optimal interference fit
of round-end mortise-and-tenon joint
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Bingrui Chen, Huiyuan Guan; College of Furnishings Utilization of Forest Resources, Nanjing Forestry University, Nanjing, People’s Republic of China
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-01-24T09:51:45Z
  DOI: 10.1080/17480272.2023.2165451
Transparent, UV blocking, and strong wood-based biocomposites with
isotropic optical and mechanical properties
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jiamin Wu, Yang Wang, Yingji Wu, Liping Cai, Daihui Zhang, Jianxiong Lu, Jianzhang Li, Changlei Xia; Engineering, Beijing Forestry University, Beijing, People’s Republic of China
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-01-17T06:19:21Z
  DOI: 10.1080/17480272.2023.2165450
The effect mechanism and properties of poplar wood cross-linking modified
with polyols and polycarboxylic acid
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Youming Dong, Silong Gao, Kaili Wang, Xianxu Zhan, Zhiwen Li, Yifan Zhao, Miao Wu, Mark Hughes; Biosystems, Aalto University, Espoo, Finland
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-01-17T06:19:19Z
  DOI: 10.1080/17480272.2023.2167110
Strain measurement in glulam timber for bridges with embedded strain
gauges and detection of moisture-variation effects
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Placide Uwizeyimana, Marianne Perrin, Emmanuel Laügt, Pierre Larricq, Florent Eyma; University of Toulouse, Tarbes, France2 University of Toulouse, UPS – IUT de Tarbes, department of Electrical Engineering Industrial IT, Tarbes, France
  Pages: 1 - 11
  Abstract: .
  
  Citation: Wood Material Science and Engineering
  PubDate: 2023-01-11T07:36:43Z
  DOI: 10.1080/17480272.2023.2165147