|
Journal of Ocean Engineering and Technology
Number of Followers: 1  Open Access journalISSN (Print) 1225-0767 - ISSN (Online) 2287-6715 Published by The Korean Society of Ocean Engineers  [1 journal]
|
- Study on Optimal Damping Model of Very Large Offshore Semi-submersible
Structure
Abstract: In order to analyze the response of the offshore structure numerically, the linear potential theory is generally applied for simplicity, and only the radiation damping is considered among various damping forces. Therefore, the results of a numerical simulation can be different from the motion of the structure in a real environment. To reduce the differences between the simulation results and experimental results, the viscous damping, which affects the motion of the structure, is also taken into account. The appropriate damping model is essential for the numerical simulation in order to obtain precise responses of the offshore structure. In this study, various damping models such as linear or quadratic damping and the nonlinear drag force from numerous slender bodies were used to simulate the free decay motion of the platform, and its characteristics were confirmed. The optimized damping model was found by comparing the simulation results to the experimental results. The hydrodynamic forces and wave exciting forces of the structure were obtained using WAMIT, and the free decay test was simulated using OrcaFlex. A free decay test of the scale model was performed by KRISO.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Quayside Mooring System Design of Prelude FLNG for Extreme Environmental
Condition
Abstract: The design and analysis of a quayside mooring system for safe mooring of Prelude FLNG under extreme environmental conditions were carried out. The design of the mooring system considered the yard operation conditions and maximum wind speed during a typhoon. In order to secure the mooring safety of Prelude FLNG under an extreme environment, a special steel structure was designed between the quay and Prelude FLNG to maintain the distance from the quay to a certain extent to avoid a collision with the inclined base. The mooring safety was also ensured by installing additional new parts on the quay. A mooring analysis and mooring safety review were performed with more rigorous modeling considering the nonlinearity of the mooring rope and fender. In order to secure additional safety of the mooring system under extreme environmental conditions, a safety assessment was conducted on the failures of the mooring components proposed in the marine mooring guidelines. Based on the results of the mooring analysis, it was confirmed that the Prelude FLNG can be safely moored even under the extreme conditions of typhoons, and a worst case scenario analysis verified that the mooring system design was robust enough. The proposed mooring analysis and design method will provide a basis for the safe mooring of ultra-large floating offshore structures of similar size in the future.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Analysis of Velocity Potential around Pulsating Bubble near Free or Rigid
Surfaces Based on ...
Abstract: An analytical method for predicting the velocity potential around a pulsating bubble close to a free or rigid wall was established using an image method. Because the velocity potential should satisfy two boundary conditions at the bubble surface and rigid wall, we investigated the velocity in the normal direction at the two boundaries by adding the image bubbles. The potential was analyzed by decomposing the bubble motion as two independent motions, pulsation and translation, and we found that when the number of image bubbles was greater than ten, the two boundary conditions were satisfied for the translation term. By adding many image bubbles after the approximation of the pulsation term, we also confirmed that the boundary condition at the wall was satisfied.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Numerical Analysis of Unsteady Cavitating Vortex around Two-dimensional
Wedge-shaped Submerged Body
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Study on Ice Parameters Affecting DP Performance of FPSO in Arctic Ocean
Abstract: Recently, various efforts have been made to develop oil and gas in the Arctic Ocean. It is very important to consider the load caused by ice in designing floating structures in the area. The magnitude of the ice load and its impact on a structure should be considered. In this paper, we analyze ice parameters affecting the DP performance of FPSO with a DP-assisted mooring system. Several ice characteristics are selected, and the resulting ice load is calculated using GEM software. Numerous simulations are conducted while changing the values of the parameters, and DP capability plots are generated to visualize the effects of changing these parameters. It is shown that the ice drift speed and thickness are the major properties to be considered in DP system design. The limitations of the analysis and future work are discussed in the conclusion.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Experimental Study on Floating LNG Bunkering Terminal for Assessment of
Loading and Offloading ...
Abstract: In this study, the operability of an FLBT (floating LNG bunkering terminal) was evaluated experimentally. Model tests were conducted in the KRISO (Korea Research Institute of Ships and Ocean Engineering) ocean engineering basin. An FLBT, an LNG carrier, and two LNG bunkering shuttles were moored side by side with mooring ropes and fenders. Two white-noise wave cases, one irregular wave case, and various regular wave cases were generated. The relative local motions between each LNG loading arm and its corresponding manifold in the initial design configuration were calculated from measured 6-DOF motions at the center of gravity of each of the four vessels. Furthermore, the locations of the LNG loading arms and manifolds were varied to minimize the relative local motions.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Development of Sea Surface Wind Monitoring System using Marine Radar
Abstract: A wave buoy commonly used for measurements in marine environments is very useful for measurements on the sea surface wind and waves. However, it is constantly exposed to external forces such as typhoons and the risk of accidents caused by ships. Therefore, the installation and maintenance charges are large and constant. In this study, we developed a system for monitoring the sea surface wind using marine radar to provide spatial and temporal information about sea surface waves at a small cost. The essential technology required for this system is radar signal processing. This paper also describes the analytical process of using it for monitoring the sea surface wind. Consequently, developing this system will make it possible to replace wave buoys in the near future.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Implementation of Heading Angle and Depth Keeping Control of ROV with
Multiple Thrusters by ...
Abstract: This study deals with the heading angle and depth keeping control technique for an ROV with multiple horizontal and vertical thrusters by thrust allocation. The light work class ROV URI-L, which is under development at KRISO, is a redundant actuating system with multiple thrusters that are larger than the ROV's degree of freedom. In the redundant actuating system, there are several solutions for a specific ROV motion to be performed. Therefore, a thrust allocation algorithm that considers the entire propulsion system should be regarded as important. First, this paper describes the propulsion system of the ROV and introduces the thrust allocation method of each motion controller. In addition, the performance of the controller is examined using a heading angle and depth keeping control test in a stationary state.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
- Conceptual Design of Motion Reduction Device for Floating Wave-Offshore
Wind Hybrid Power ...
Abstract: The present study deals with the conceptual design of a motion reduction device for a floating wave-offshore wind hybrid power generation platform. A damping plate attached to the bottom of a column of a large semi-submersible is introduced to reduce the motion of the platform. Performance analyses on various shapes and configurations of damping plates were performed using the potential flow solver, and the appropriate configuration and size of the damping plate were selected based on the numerical results. In order to see the effect of viscous damping, a small scale model test was performed in a 2D wave flume. The performances of five different damping plates were measured and discussed based on the results of free decay tests and regular wave tests.
PubDate: Wed, 28 Feb 2018 00:00:00 +010
