JournalTOCs

Heat Transfer Engineering
Journal Prestige (SJR): 0.57

Citation Impact (citeScore): 1
Number of Followers: 38

Hybrid journal (It can contain Open Access articles)
ISSN (Print) 0145-7632 - ISSN (Online) 1521-0537
Published by Taylor and Francis

[2652 journals]

Influence of Obliquely Spiral Jet Impingement on Flow and Heat Transfer
Characteristics of Flat Surface
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Natthaporn Kaewchoothong a Department of Mechanical; thermal battery management system.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-04-11T01:25:43Z
  DOI: 10.1080/01457632.2025.2489707
The Potential of Hourglass-Shaped Pin-Fins on Enhancing Thermohydraulic
Performance in Microchannel Arrays
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Justina Jaseliūnaitė Marijus Šeporaitis Laboratory of Nuclear Installation Safety; Lithuanian Energy Institute, Kaunas, LithuaniaJustina Jaseliūnaitė is a PhD student in energetics interfacial interactions in horizontal vertically stratified two-phase flow.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-04-01T07:26:07Z
  DOI: 10.1080/01457632.2025.2480904
A Dual-Mesh Method for Speeding up Conjugated Conductive-Radiative Heat
Transfer Computations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Maciej Rogożyński Piotr Łapka Faculty of Power; numerical methods.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-04-01T06:42:03Z
  DOI: 10.1080/01457632.2025.2480902
Numerical Investigation of the Effect of Dimpled Surface on Convective
Heat Transfer and Friction Factor in a Rectangular Channel
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Erman Aslan Elif Eker Kahveci Murad Kucur Banu Körbahti a Department of Mechanical Engineering; Kocaeli University, Kocaeli, Turkeyb Department of Mechanical Engineering, Sakarya University, Sakarya, Turkeyc Department of Mechanical Engineering, Istanbul University-Cerrahpasa, Istanbul, TurkeyErman Aslan is an Associate Professor at Kocaeli University, Turkey. He received his B.Sc., M.Sc., fluid mechanics.
  Pages: 1 - 29
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-31T11:03:35Z
  DOI: 10.1080/01457632.2025.2480905
Effects of Mist/Steam Flow on Heat Transfer Performance for Rib Turbulated
Channel
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sajan Tamang Heesung Park a Department of Mechanical Engineering; Changwon National University, Changwon, South Koreab Department of Smart Manufacturing Engineering, Changwon National University, Changwon, South KoreaSajan Tamang is currently a Ph.D. student at Smart Manufacturing holds 12 patents.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-27T11:57:05Z
  DOI: 10.1080/01457632.2025.2480903
Small Domain Numerical Approach to Study Cylinder Temperature Heated by
Moving Heat Source
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lu Wang Xin Lu Jinlong Zhang Liangbi Wang a School of Mechanical; the general descriptive parameters of secondary flow intensity. He developed the numerical design method of tube fin heat exchanger.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-26T06:11:00Z
  DOI: 10.1080/01457632.2025.2480907
Transitional Mixed Convection in Inclined Solar Air Heater Tube with Wavy
Inserts
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Devendra Kumar Vishwakarma Suvanjan Bhattacharyya Manoj Kumar Soni Ali Cemal Benim a Department of Mechanical Engineering; Birla Institute of Technology Head of Center of Flow Simulation at the Duesseldorf University of Applied Sciences, Duesseldorf, Germany.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-26T06:06:37Z
  DOI: 10.1080/01457632.2025.2480906
Selected Papers from the 14th International Conference on Computational
Heat and Mass Transfer (ICCHMT2023)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ali Cemal Benim Center of Flow Simulation; Department of Mechanical Head of Center of Flow Simulation at the Duesseldorf University of Applied Sciences, Duesseldorf, Germany.
  Pages: 1 - 1
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-21T06:16:08Z
  DOI: 10.1080/01457632.2025.2480900
Assessment of Solar and Desiccant-Assisted Building Air-Conditioning
Systems for Net-Zero Status in Hot-Humid Conditions
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gaurav Singh Ranjan Das a Department of Energy Science; building air-conditioning systems.
  Pages: 1 - 33
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-17T11:42:29Z
  DOI: 10.1080/01457632.2025.2473779
A Passive Geothermal-Based Approach to Snow Melting
Using Natural Circulation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiangcheng Wu Mengzhu Ma Jin Lu Liangbin Su Xianbao Yuan Huayu Chen Oybek Ishnazarov a Hubei Key Laboratory of Hydroelectric Machinery Design & Maintenance; Three Gorges University, Yichang, Chinab School of Mechanical resource management system based on modern information technologies of technological process.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-11T07:05:32Z
  DOI: 10.1080/01457632.2025.2473783
Interferometric Study of Transient Natural Convection in Open Enclosure
with Square Obstacle
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sonu Kumar Swarup Kumar Mahapatra Subhankar Ray School of Mechanical Sciences; Indian Institute of Technology Bhubaneswar, Bhubaneswar, Odisha, IndiaSonu Kumar has completed his PhD from the School of Mechanical Sciences at Indian Institute of Technology (IIT) Bhubaneswar numerical study of the natural convection heat transfer in cavities of different shapes.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-10T06:09:57Z
  DOI: 10.1080/01457632.2025.2473781
Pore Scale Simulation of Fluid Flow and Heat Transfer in Packed Beds with
Different Packing Structures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nan Li Peng Feng Meng Yue Zhilong He a School of Energy; heat transfer in packed/fluidized beds of particles.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-07T07:53:21Z
  DOI: 10.1080/01457632.2025.2473782
Experimental Investigation on Film Condensation Heat Transfer
Characteristics of R245fa Outside Horizontal Tube
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Liansheng Liu Jifeng Li Tiancheng Lian Huilong Liu Xuanchen Liu a School of Energy; its application technology.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-07T07:45:02Z
  DOI: 10.1080/01457632.2025.2473780
Experimental Study on Heat Transfer Performance of Micro-Channel Heat Pipe
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yaping Zhang Chenlong Li Xingke Cui Mengge Hu Haochen Jiang a College of Energy; Xi’an University of Science Technology in 2021. His main research interest is heat pipe conduction.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-03-05T09:29:47Z
  DOI: 10.1080/01457632.2025.2473778
Energy Simulation Module Development of Evaporative Condensing Chiller
Based on TRNSYS
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chunmei Guo Yuxin Hao Botao Gou School of Energy; Environment from Tianjin Chengjian University, Tianjin, China in 2023. His research interests are in the study of energy saving characteristics of evaporative condensing refrigeration systems.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-25T09:24:51Z
  DOI: 10.1080/01457632.2025.2468126
Enhancing Liquid Desiccant Dehumidification Performance with Embossed
Stainless-Steel Plates
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Huan Liu Chuanshuai Dong a Key Laboratory of Enhanced Heat Transfer; phase change material. He has published over 50 SCI papers in well-known journals.
  Pages: 1 - 9
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-25T09:20:40Z
  DOI: 10.1080/01457632.2025.2468124
Preparation of Durable Superomniphobic Surfaces for Applications in
Condensation Heat Transfer
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jinghui Zhi Wenfeng Li Chuangqi Xu a School of Energy; Power Engineering, Jiangsu University, China. His major is thermal engineering.
  Pages: 1 - 11
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-24T07:32:35Z
  DOI: 10.1080/01457632.2025.2468123
Study on Dehumidification Characteristics of an Ultra-Small
Dehumidification Rotor
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jiannan Yao Bolong Yu Bowen Gu Jian Li Guannan Xi a School of Mechanical Engineering; Nantong University, Nantong, Chinab Intelligent Manufacturing Research Institute, Nantong Institute of Technology, Nantong, ChinaJiannan Yao received his Ph.D. degree in mechatronic engineering from China University of Mining organic waste disposal.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-24T06:24:32Z
  DOI: 10.1080/01457632.2025.2468125
Three-Dimensional Simulation of Flow Channel for Performance Enhancement
of Electrolyte Membrane Dehumidifiers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Heyong Li Junhua Shang Tongbo Qi Yawei Li Wei Yang Ronghui Qi Li-zhi Zhang a New Energy College; Zhengzhou University of Light Industry, Zhengzhou, Chinab Key Laboratory of Enhanced Heat Transfer mass transfer.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-24T05:58:48Z
  DOI: 10.1080/01457632.2025.2468122
Thermal Performance Evaluation of Immersion-Cooled Single Cylindrical
Battery and Battery Pack: An Experimental-Based Simulation Study
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Niaz Muhammad Khan JiaHui Li Yunsheng Zhao Cai-hang Liang Chenghui Wu Abdul Rehman Hashmi Fatima Saadat a School of Mechanical; desalination systems.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-24T03:06:42Z
  DOI: 10.1080/01457632.2025.2468121
Selected Papers from the 6th International Symposium on Heat Transfer and
Energy Conservation (ISHTEC2024)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ronghui Qi Li-Zhi Zhang a Key Laboratory of Enhanced Heat Transfer; on the editorial boards of several international SCI journals. He served as the Chairman of ISHTEC2024.
  Pages: 1 - 3
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-22T07:36:18Z
  DOI: 10.1080/01457632.2025.2468119
Data Driven Optimal Design of Flattened Microchannel Heat Sinks with
Non-Newtonian Coolants
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Seyed Amin Chabok Ali Ahmadpour Department of Mechanical Engineering; Amirkabir University of Technology (Tehran Polytechnic), Tehran, IranSeyed Amin Chabok received his master’s in Mechanical Engineering-Energy Conversion at Amirkabir University of Technology (Tehran Polytechnic). He is currently a research assistant at the Department of Mechanical Engineering. His research interests include CFD, heat transfer, heat transfer of complex fluids. He has published multiple articles on the subject, especially on the thermal management of electronic devices.
  Pages: 1 - 22
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-18T06:38:24Z
  DOI: 10.1080/01457632.2025.2459982
Validation of the Modified k − ε Turbulence Model for Conical Vortex
Tubes Accounting for Compressibility Effects
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Itay Zinn Anatoliy Khait Idit Avrahami Department of Mechanical Engineering & Mechatronics; Faculty of Engineering, Ariel University, Ariel, IsraelItay Zinn is an M.Sc. student at the Department of Mechanical Engineering problems.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-08T03:43:01Z
  DOI: 10.1080/01457632.2025.2459986
Experimental and Numerical Study on Performance of Indirect Evaporative
Cooler with Baffles
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Seong-Bhin Kim Kwang-Am Moon Hwi-Ung Choi Kwang-Hwan Choi a Graduate School of Refrigeration; evaporative coolers.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-07T07:02:01Z
  DOI: 10.1080/01457632.2025.2459984
Simulation Study Based on Experimental Flexible Composite Phase Change
Material for Battery Thermal Management
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiaoping Yang Weibiao He a Guangdong Provincial Key Laboratory of Distributed Energy Systems; School of Chemical Engineering distributed energy.Weibiao He is currently a master’s student at Xiangtan University. He is focusing on the numerical simulation study of the battery thermal management system.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-07T06:57:41Z
  DOI: 10.1080/01457632.2025.2459983
Flow and Heat Transfer in Ribbed Swirl Tubes with a Tangential Inlet Jet
for Gas Turbine Blade Leading Edge Cooling
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Natthaporn Kaewchoothong Sarawut Gonsrang Ni-Asri Cheputeh Department of Mechanical; Mechatronics Engineering at Prince of Songkla University, Thailand. He received his Ph.D. in Metallurgy and Materials, at the University of Birmingham, United Kingdom, in 2023. He is interested in numerical simulation of high-speed trains.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-06T07:22:35Z
  DOI: 10.1080/01457632.2025.2459985
A Review on Additive Manufacturing of Topology Optimized Microchannel Heat
Sink
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Amit Kumar Shah Hongxia Li Zhicheng Xin Zan Wu a College of Electrical Engineering; Zhejiang University, Hangzhou, Chinab School of Mechanical Engineering, Guangxi University, Nanning, Chinac ZJU-Hangzhou Global Scientific Mass Transfer (ICHMT).
  Pages: 1 - 27
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-03T03:21:25Z
  DOI: 10.1080/01457632.2025.2459981
Impact of Structural and Sink Parameters on Performance of Loop Heat Pipe
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Shail N. Shah Sanjay V. Jain Kamleshkumar Baraya a Department of Mechanical Engineering; Nirma University, Ahmedabad, Indiab Thermal Engineering Department, SAC-ISRO, Ahmedabad, IndiaShail N. Shah is a Ph.D. research scholar at Institute of Technology, Nirma University, Ahmedabad, India. He has more than 8 years of experience in teaching loop heat pipes.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-02-02T12:00:24Z
  DOI: 10.1080/01457632.2025.2452750
Pool boiling experiments in graphene, graphene oxide and reduced graphene
oxide nanofluid
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sudhir Kumar Singh Deepak Sharma Department of Mechanical Engineering; National Institute of Technology Hamirpur, Hamirpur, IndiaSudhir Kumar Singh is pursuing his Ph.D. in the Department of Mechanical Engineering, NIT Hamirpur, India. He received his master’s degree in 2018 from Thapar Institute of Eng. & Technology, Patiala, India. His research interests include experimental solar cavity receiver.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-23T06:53:12Z
  DOI: 10.1080/01457632.2025.2452744
Thickness Profile Measurements of Acoustic Induced Maneuvering of Thin
Film Evaporation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Saumya Singh Ankit Kumar Soubhik Kumar Bhaumik Pawan Kumar Singh Subramanian Narayanan a Department of Mechanical Engineering; Indian Institute of Technology (ISM), Dhanbad, Indiab Department of Chemical Engineering, Indian Institute of Technology (ISM), Dhanbad, IndiaSaumya Singh is a research scholar in the Department of Mechanical Engineering at Indian Institute of Technology, Dhanbad. Her research interests are microfluidics, nanofluids, heat transfer, aerodynamics.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-23T06:51:44Z
  DOI: 10.1080/01457632.2025.2452749
Thermal Analysis of Self-Powered and Controlled Dual Sourced Hybrid
Box-Type Solar Cooker
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Abhijeet Redekar Dipankar Deb Electrical; Elsevier.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-23T06:49:57Z
  DOI: 10.1080/01457632.2025.2452746
Selected Papers from the 2nd International Conference on Futuristic
Advancements in Materials, Manufacturing, and Thermal Sciences (IC FAMMT
2024)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gautam Choubey Sumit Tripathi Vivek Kumar Singh a Department of Mechanical & Aerospace Engineering; Institute of Infrastructure, Technology Research IDRSS. He is the recipient of Dr. Wille Memorial Prize for the year 2007, conferred by The National Society of Fluid Mechanics & Fluid Power, India.
  Pages: 1 - 2
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-20T03:16:52Z
  DOI: 10.1080/01457632.2025.2453260
Numerical Investigations of Superconducting Material Cooling Using
Buoyancy-Driven Heat Transport in Cryogenic Nanofluids
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Smrutiranjan Nayak Atul Bhattad Kishore Singh Patel a Mechanical Engineering Department; National Institute of Technology Rourkela, Rourkela, Indiab Department of Mechanical Engineering, Koneru Lakshamaiah Education Foundation, Vaddeswaram, IndiaSmrutiranjan Nayak is a doctoral research scholar at the Department of Aerospace Engineering, Indian Institute of Technology Kanpur. He completed his master’s degree in mechanical engineering (specialization in Cryogenics & Vacuum Technology) in 2023 from the National Institute of Technology Rourkela He received his bachelor’s degree in mechanical engineering from the BPUT Odisha in 2018. His research interests are heat transfer, thermal management, fluid mechanics, 2020.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-20T03:13:35Z
  DOI: 10.1080/01457632.2025.2452751
Design and Development of Point Focus Integrated Linear Fresnel Solar
Collector for 1kW Thermal Power Generation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gunjan Kumar Pulkit Kumar a Department of Mechanical Engineering; UPL University of Sustainable Technology, Ankleshwar, Indiab Air Control conferences.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-20T03:01:45Z
  DOI: 10.1080/01457632.2025.2452743
Numerical Modeling of Thermal Link for Optical Cooler
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sarang Balasaheb Deshpande Mandar Vinayak Tendolkar Vivek Kumar Singh a Department of Mechanical Engineering; Veermata Jijabai Technological Institute, Mumbai, Indiab Thermal Engineering Division, Space Applications Centre, ISRO, Ahmedabad, IndiaSarang Balasaheb Deshpande is a Mechanical-Thermal-CFD Engineer with over two years of experience at FLOW-3D, Flow Science Software Pvt. Ltd. in Pune. He specializes in numerical modeling of free surface flows, confined flows, IDRSS. He is the recipient of Dr. Wille Memorial Prize for the year 2007, conferred by The National Society of Fluid Mechanics & Fluid Power, India.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-19T07:18:12Z
  DOI: 10.1080/01457632.2025.2452748
Experimental Study of Different Factors Influencing Supercooling in Phase
Change Material–Sodium Acetate Trihydrate
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ridhi V. Raaj Amrita Sharma Hardik Kothadia Department of Mechanical Engineering; Indian Institute of Technology Jodhpur, Rajasthan, IndiaRidhi V Raaj is pursuing her masters in Mechanical Engineering Department from the Indian Institute of Technology Jodhpur, India. She has been working on investigating different bottlenecks associated with PCM for complete utilization.Amrita Sharma is a Ph.D. student of the Mechanical Engineering Department, Indian Institute of Technology Jodhpur, India. Her research interests include designing fluid dynamics. He is working on thermal performance testing of different thermofluids equipment of the macro/micro-scale.
  Pages: 1 - 11
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-16T10:12:27Z
  DOI: 10.1080/01457632.2025.2452745
Numerical Study on the Influence of Solutal Buoyancy on Mixed Convection
Heat and Mass Transfer in Skewed Domain
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ranjit J. Singh Yellakonda S. Kannan Hari Krishan Yadav Rahul a Division of Engineering; New York University Abu Dhabi, Abu Dhabi, UAEb Department of Mechanical Engineering, Chaitanya Bharathi Institute of Technology, Hyderabad, IndiaRanjit J. Singh is currently working as a post-doctoral fellow at New York University Abu Dhabi. Previously, he was associated with the University of California Los Angeles, IIT Bombay, master’s degree in Materials Engineering from the esteemed University of Hyderabad (Institute of Eminence).
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-15T08:57:39Z
  DOI: 10.1080/01457632.2025.2452747
Calculations of Gas and Grate Boilers Combustion Chambers - Verification
of Methods Based on Measurement Data of Actual Boilers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Łukasz Rutkowski Ireneusz Szczygieł a Power Boiler Manufacturer Sędziszowska Fabryka Kotłów SEFAKO S.A; Gliwice, Polandb Institute of Thermal Technology, Silesian University of Technology, Gliwice, PolandŁukasz Rutkowski graduated from the Faculty of Energy has directed or participated in over twenty research projects.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-08T07:56:56Z
  DOI: 10.1080/01457632.2024.2445919
Thermal Performance Analysis of a Miniature Loop Heat Pipe with
Water-Graphene Working Fluid
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hadi Mirkazemi Masoud Ziaei-Rad Department of Mechanical Engineering; Faculty of Engineering, University of Isfahan, Isfahan, IranHadi Mirkazemi obtained his bachelor’s degree in 2018 renewable energy facilities.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-08T07:42:47Z
  DOI: 10.1080/01457632.2024.2445918
Numerical Investigation of the Phase-Change Heat Transfer Mechanism in
Sodium Heat Pipes
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: BingBing Peng Wei Wang Liang Ding BingXi Li Yong Shuai School of Energy Science; served as an Associate Professor at HIT from June 2008 to December 2013.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2025-01-02T08:33:22Z
  DOI: 10.1080/01457632.2024.2445917
Influence of Nozzle Geometries on Heat Transfer and Flow Characteristics
of Swirling Impinging Micro-Slot Jets
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Natthaporn Kaewchoothong Chayut Nuntadusit Montri Luengchavanon a Department of Mechanical; energy storage.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-31T11:30:06Z
  DOI: 10.1080/01457632.2024.2445916
Experimental Study of Condensation Heat Transfer on Thermally Improved
Hybrid Teflon-Copper Vertically Patterned Surfaces
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Shahab Shahlaei Ehsan Aminian Mohammad Kamali Hamid Saffari School of Mechanical Engineering; Department of Energy Conversion, Iran University of Science HVAC&R.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-31T11:22:26Z
  DOI: 10.1080/01457632.2024.2445914
Thermal Performance of Selected Nanofluids in Combination with Heat
Transfer Inserts
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Abdul Kaggwa Martin Atkins Amir Tarighaleslami Michael Walmsley James K. Carson School of Engineering; University of Waikato, University of Waikato, Hamilton, New ZealandAbdul Kaggwa completed his PhD in engineering studying heat transfer performance enhancement effects of nanofluids with surfactants. Since completing his PhD, he has taken on the role of Asset Engineer at the Hamilton City Council (New Zealand) where his main focus is the Council’s Open Spaces Asset Management Plan.Martin Atkins is Senior Lecturer at the University of Waikato where he serves as program leader for the Chemical thermal process modeling, with applications mainly related to food refrigeration. More recently he has focused more on improving the performance of vapor compression cycles as part of the Ahuora Program where he is Leader of Aim 2.
  Pages: 1 - 9
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-27T10:23:00Z
  DOI: 10.1080/01457632.2024.2445913
An Investigation of Hyperthermia for Non-Newtonian Fluid Inside an
Imitation Circular Vein
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lam Lam Yi Fan Yang Naihe Song Hou Kuan Tam Qingsong Xu Chun Wing Cheung Lap Mou Tam Afshin J. Ghajar a Department of Electromechanical Engineering; Faculty of Science Heat Transfer in Tubes, Mechanical Engineering Series, published by Springer, 2022.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-18T08:18:17Z
  DOI: 10.1080/01457632.2024.2437889
Improvement of Heat Conduction in Triply Periodic Minimal Surface Heat
Sinks Filled with Phase Change Materials
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tianyu Si Han Zhang Qiuwang Wang Zhilong Cheng Key Laboratory of Thermo-Fluid Science; reacting flow. He has published more than 20 journal papers. He has given 4 invited keynote lectures at international conferences.
  Pages: 1 - 11
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-17T10:01:42Z
  DOI: 10.1080/01457632.2024.2437892
Autonomous Cooling Design and Temperature Control Mechanism
of Hypersonic Vehicle
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lin Wang Rui Ma Bing Liu Shibin Li Hypersonic Technology Laboratory; National University of Defense Technology, Changsha, ChinaLin Wang is an associate research fellow of Hypersonic Technology Laboratory, National University of Defense Technology, Changsha, China. He received his Ph.D. from National University of Defense Technology in 2014. His area of interest is the active thermal protection, steam- water flow inside the porous media.Rui Ma is a doctoral student of Hypersonic Technology Laboratory, National University of Defense Technology. She is interested in thermal protection technology for high-speed aircraft. Her present work is to investigate the mechanism of liquid-vapor two-phase flow steam-water two phase flow.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-16T11:33:24Z
  DOI: 10.1080/01457632.2024.2437893
Numerical Simulation of a Wavy Fin-and-Tube Heat Exchanger Under Wet
Conditions
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yue Zhang Pan Cui Rui Long Zhichun Liu Wei Liu School of Energy; Master students.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-13T08:02:04Z
  DOI: 10.1080/01457632.2024.2437895
Numerical Optimization of Thermal Performance Using Kriging Method in a
Propulsion Motor
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sungjin Yang Yongwoo Shin Gihun Son Jongrak Choi a Mechanical Engineering Department; Sogang University, Seoul, Republic of Koreab Korea Electronics Technology Institute, Bucheon, Republic of KoreaSungjin Yang is a principal researcher at the Korea Electronics Technology Institute (KETI), Bucheon, Korea simulation solvers’ automation.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-13T06:56:49Z
  DOI: 10.1080/01457632.2024.2437890
Selected Papers from the 7th International Workshop on Heat/Mass Transfer
Advances for Energy Conservation and Pollution Control (IWHT2023)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Guanghui Song Jingwen Liu Ting Ma Yoshihiro Deguchi Yitung Chen Qiuwang Wang a School of Energy; four US Patents.
  Pages: 1 - 1
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-13T06:51:49Z
  DOI: 10.1080/01457632.2024.2437888
Effects of Spline Mid-Passage Gap on Turbine Endwall Film Cooling
Characteristics
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhao Liu Weixin Zhang Yixuan Lu Yu Song Zhenping Feng Shaanxi Engineering Laboratory of Turbomachinery; aerothermodynamics of turbomachinery.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-11T11:01:40Z
  DOI: 10.1080/01457632.2024.2437894
Effect of Spindle Deviation on the Performance of Adjustable Ejectors
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jianxiang Gao Yuyan Hou Xiao Su Weixiong Chen Jiantao Zheng Jinshi Wang Daotong Chong a State Key Laboratory of Multiphase Flow in Power Engineering; Xi’an Jiaotong University, Xi’an, Chinab Huaneng Clean Energy Research Institute, Beijing, ChinaJianxiang Gao is a master student of State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University. His present research is to investigate the performance of ejectors based on CFD simulation. He is interested in the application of adjustable steam ejector.Yuyan Hou is a master student of State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University. His present research is to investigate the performance of ejectors based on CFD simulation. He is interested in the application of supersonic ejectors.Xiao Su is a master student of State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University. He is interested in the energy Technology.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-12-11T10:53:19Z
  DOI: 10.1080/01457632.2024.2437891
Thermal Performance Enhancement of Ice Storage Capsule
by Dandelion-Shaped Fins
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yanmei Wang Chengbin Zhang Weibo Yang Liangyu Wu a College of Electrical; Energy micro-scale multiphase flow.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-28T12:12:34Z
  DOI: 10.1080/01457632.2024.2427318
Comprehensive Strategies for Addressing Tube and Tubesheet Joint Leaks
in Shell-and-Tube Heat Exchangers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohammad Atiqur Rahman Arcadium Lithium; Bessemer City, NC, USAMohammad A. Rahman serves as the Global Reliability Engineer at Arcadium Lithium, USA. He earned his MSc in Mechanical Engineering from the University of New Brunswick, Canada in 2012. He specializes in enhancing the reliability of static tube heat exchangers.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-25T12:21:06Z
  DOI: 10.1080/01457632.2024.2427313
New Two-Phase Multiplier Model for Phase-Change Flows in Plate Heat
Exchangers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yagnavalkya Mukkamala Jaco Dirker a School of Mechanical Engineering; Vellore Institute of Technology, Vellore, Indiab Department of Mechanical post-doctoral scholars. He is a registered professional engineer at the Engineering Council of South Africa.
  Pages: 1 - 29
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-25T04:54:47Z
  DOI: 10.1080/01457632.2024.2427314
Correction
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Pages: 1 - 1
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-25T04:17:27Z
  DOI: 10.1080/01457632.2024.2434212
Optimization Investigation of Bionic Fin Structure by Experimental and
Numerical Modelling
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chunhua Min Kun Wang Yuanhong Fan Xuguang Yang Kun Wang a School of Energy; technology.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-23T06:21:40Z
  DOI: 10.1080/01457632.2024.2427315
Hybrid Nanofluid Flow in Microchannel With Fins: Thermal-Hydraulic,
Entropy Generation and Energy Management Analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jeffrey Zhan Xian Jee Angnes Ngieng Tze Tiong Department of Chemical; circular economy.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-15T05:13:06Z
  DOI: 10.1080/01457632.2024.2427317
Flow and Heat Transfer Behaviors of Impinging Spiral Jet Arrays
in a Rectangular Channel Based on Battery Cooling Technique
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Natthaporn Kaewchoothong Sawit Tanthanuch Chayut Nuntadusit Kiattisak Sengchuai a Department of Mechanical; EV motors.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-12T05:17:37Z
  DOI: 10.1080/01457632.2024.2427316
Cauchy Type Nonlinear Inverse Problem in a Two-Layer Cylindrical Area
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Michał Ciałkowski Magda Joachimiak Magdalena Mierzwiczak Andrzej Frąckowiak Aleksander Olejnik Adam Kozakiewicz a Institute of Thermal Engineering; Poznan University of Technology, Poznan, Polandb Institute of Applied Mechanics, Center for Mechatronics, Biomechanics diagnostics of turbine engines.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-07T04:46:19Z
  DOI: 10.1080/01457632.2024.2416285
Determination of the Temperature on the Inner Wall of the Piston Machine
Body by Solving the Inverse Problem
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Magda Joachimiak Andrzej Frąckowiak Damian Joachimiak Institute of Thermal Engineering; Faculty of Environmental Engineering machines as well as in thermo-chemical treatment.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-07T04:42:04Z
  DOI: 10.1080/01457632.2024.2416283
Biomass as a Renewable Energy Source for Power Boilers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Marek Pronobis Department of Power Engineering; SNCR technology. He developed the concepts of many modernizations implemented in the energy sector.
  Pages: 1 - 9
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-11-01T05:04:19Z
  DOI: 10.1080/01457632.2024.2416281
On the Correct Nusselt Numbers for Laminar Fully Developed Flow in a Plane
Channel with Isothermal Walls
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: S. Paolucci Department of Aerospace; Applied Mathematics (SIAM).
  Pages: 1 - 5
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-25T06:48:26Z
  DOI: 10.1080/01457632.2024.2416286
Numerical Study of Sputter Deposited Ultra-Low Loaded Effective Platinum
Electrocatalyst Utilization in Proton Exchange Membrane Fuel Cell
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chidambaram Ramesh Kumar Parthasarathy Rajesh Kanna Vignesh Boopalan Jobel Jose Senthil Kumar Arumugam Dawid Taler Tomasz Sobota Jan Taler a Automotive Research Centre; Vellore Institute of Technology, Vellore, Indiab CO2 Research the number of citations of his papers is 2792.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-18T09:29:43Z
  DOI: 10.1080/01457632.2024.2416282
Selected Papers from the VIth Modern Power Systems and Units Conference
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Damian Piotr Muniak Dorota Skrzyniowska Department of Energy; Cracow University of Technology, Cracow, PolandDamian Piotr Muniak is an Assistant Professor at the Department of Energy, Cracow University of Technology, Poland. He received his Ph.D. (2014) renewable energy sources.
  Pages: 1 - 2
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-18T09:28:33Z
  DOI: 10.1080/01457632.2024.2416287
The Performance of Solar Still in Continental Climates: A Case Study in
Poland
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ewelina Radomska Łukasz Mika Piotr Boruta Tomasz Bujok Faculty of Energy; the use of renewable energy in buildings.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-17T08:09:45Z
  DOI: 10.1080/01457632.2024.2416284
Techno-Economic Feasibility Study of Earth Air Heat Exchangers for Gas
Turbine Inlet Air Cooling
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohammad Hossein Bahmani Ali Hakkaki-Fard a RASES Lab; Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iranb Department of Mechanical Engineering, Université Laval, Québec, Québec, CanadaMohammad Hossein Bahmani is a Sharif University of Technology Ph.D. candidate in mechanical engineering. He received his B.Sc. thermodynamics.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-14T07:29:21Z
  DOI: 10.1080/01457632.2024.2407673
Investigation on Saturation Vapor Pressure of NH3–H2O–LiBr in
Absorption Energy Storage System
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jitong Li Gang Wang Yonghan Zhao Xiaoyan Cui Haoqi Cui Yaxuan Xiong Qunli Zhang a School of Environmental; phase change thermal storage.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-07T09:48:27Z
  DOI: 10.1080/01457632.2024.2407672
An Experimental Investigation on the Performance Analysis of Two-Stage
Desert Cooler
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pushpanjay K. Singh Sudarshan Singh Amar Nath Sinha a School of Technology Management & Engineering; SVKM’s Narsee Monjee Institute of Management Studies (Deemed-to-be-University), Indore, Indiab Department of Mechanical Engineering, National Institute of Technology Patna, Patna, IndiaPushpanjay Kumar Singh is an Assistant Professor of Mechanical Engineering at SVKM’s Narsee Monjee Institute of Management Studies (NMIMS), Indore campus. Prior to joining NMIMS, Indore, he was working as postdoc researcher at the University of Tokyo, Bunkyo-ku, Tokyo, Japan. He received his PhD Indian Institute of Technology Delhi, respectively.Amar Nath Sinha is a Professor of the Department of Mechanical Engineering at the National Institute of Technology Patna, India. He received his PhD in Mechanical Engineering from the Indian Institute of Technology Kharagpur, India.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-04T07:39:03Z
  DOI: 10.1080/01457632.2024.2407671
Numerical Investigation of Shell-Nozzle Diameter Effect on Thermal
Performance of Shell-and-Tube Heat-Exchanger
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chan Hyeok Park Hwabhin Kwon Ehtesham Ali Jaehun Choi Ji Young Kang Sung Woong Kim Heesung Park a Department of Mechanical Engineering; Changwon National University, Changwon, South Koreab Department of Smart Manufacturing Engineering, Changwon National University, Changwon, South Koreac Naval Technology Research Institute, Republic of Korea Navy, Busan, South KoreaChan Hyeok Park is currently a graduate student in Mechanical Engineering Department of Changwon National University, South Korea. His research is focused on the shell holds 20 patents.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-03T10:39:48Z
  DOI: 10.1080/01457632.2024.2407667
Reevaluation of Plate-Fin Heatsink Natural Convection Correlations for
Sideways and Three-Dimensional Inclinations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mehdi Mehrtash Energy Systems Engineering; Atilim University, Ankara, TurkeyMehdi Mehrtash is an assistant professor of Energy Systems Engineering at Atilim University, Ankara, Turkey. He holds a BS in Mechanical Engineering from Urmia University thermal energy storage.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-03T10:36:18Z
  DOI: 10.1080/01457632.2024.2407668
Inverse Estimation of Swirl Cooling Heat Transfer Coefficient
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mostafa Forouzanmehr Farshad Kowsary Hossein Mohammadi Khaligh Department of Mechanical Engineering; College of Engineering, University of Tehran, Tehran, IranMostafa Forouzanmehr is a graduate of University of Tehran (MS 2013, BS 2010). He is currently a PhD candidate at the University of Tehran, School of Mechanical Engineering. His research interests are in the fields of inverse heat conduction, enhanced heat transfer, solar power.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-10-03T10:31:44Z
  DOI: 10.1080/01457632.2024.2407669
Flow and Heat Transfer Characteristics of Swirling Impinging Micro-Slot
Jets by Adopting Circular Ribs in the Wall Jet Region
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Natthaporn Kaewchoothong Chayut Nuntadusit a Department of Mechanical; optical measurement.
  Pages: 1 - 23
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-27T09:47:31Z
  DOI: 10.1080/01457632.2024.2407670
Experimental Study of Single and Two-Phase Flow and Heat Transfer
Characteristics in Helical Tube under Motion Condition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhiming Zhu Kui Zhang Kepiao Li Hao Fu Wenxi Tian Suizheng Qiu a Department of Nuclear Science; hydraulic analysis, safety analysis of nuclear power system.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-17T09:38:50Z
  DOI: 10.1080/01457632.2024.2400863
Research on Operation Characteristics of Passive Containment Heat Removal
System in Typical Accident Conditions
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wei Li Yongzhen Hua Weiyu Chu Ji Xing Zhongning Sun Zhaoming Meng a Harbin Engineering University; Heilongjiang Provincial Key Laboratory of Nuclear Power System & Equipment, Harbin, PR Chinab China Power Engineering Consulting Group Co., Ltd, Beijing, PR Chinac China Nuclear Power Engineering Co., Ltd, Beijing, PR ChinaWei Li is the director of the Technology Research translated 1 book. He has won many scientific research awards.
  Pages: 1 - 11
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-16T06:52:39Z
  DOI: 10.1080/01457632.2024.2400864
Analysis of the Applicability of a Phase-Change Energy Storage Wall for
Public Buildings in Hot Summer and Cold Winter Climate Zones
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Haowei Hu Yubin Zhang Qin Li Taotao Shui Jing He a School of Environment; direct/indirect application of molten salt systems.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-13T03:51:05Z
  DOI: 10.1080/01457632.2024.2400867
Local Vorticity and Flow Heat Transfer Mechanism Analysis in
Micro-Cylinder-Groups Based on Field Synergy Principle
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Guangfan Meng Kunpeng Yuan Feipeng Wan Zhaoliang Wang a Thermal Engineering; 3 books.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T11:28:55Z
  DOI: 10.1080/01457632.2024.2400869
Experimental Study on the Effect of Additives for Phase Change Hysteresis
Performance
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiaofeng Xu Yi Zhou Xiaoqiang Zhai a Shanghai Highly Appliances Co.; Ltd, Shanghai, Chinab School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, ChinaXiaofeng Xu is a researcher at the Shanghai Highly Appliances Co., Ltd. Shanghai, China. He studied refrigeration conference papers.
  Pages: 1 - 9
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T07:59:59Z
  DOI: 10.1080/01457632.2024.2400868
Steady Heat Transfer Analysis of the Refrigerator Seal Considering Rigid
and Flexible Contact
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Guoqiang Liu Tianyang Zhao Guixiang He Gang Yan Department of Refrigeration; cryogenic systems.
  Pages: 1 - 22
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T07:57:13Z
  DOI: 10.1080/01457632.2024.2400862
Effect of Strain Rate on the Structure Properties of Silica Aerogel
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ke Yang Yang Zhao Rifeng Zhou Qingli Cheng Mingyang Yang Lin Guo Wenlong Xu Mu Du a State Key Laboratory of Chemical Safety; SINOPEC Research Institute of Safety Engineering Co., Ltd, Qingdao, Chinab Institute for Advanced Technology, Shandong University, Jinan, Shandong, Chinac School of Resources Engineering, Xi’an University of Architecture Solar Energy.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T07:52:47Z
  DOI: 10.1080/01457632.2024.2400860
Performance Evaluation of a Novel Cold Plate with Double-Layer
Interdigitated Flow Channels for Battery Thermal Management
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Huaqiang Liu Hao Li Yu Shi Yulong Ji a Naval Architecture; Technology Talent.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T06:38:42Z
  DOI: 10.1080/01457632.2024.2400865
Heat Transfer in Low Carbon Energy Systems
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Huaqiang Liu Bing Tan Jiyun Zhao a Naval Architecture; Case Studies in Thermal Engineering.
  Pages: 1 - 2
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T06:37:19Z
  DOI: 10.1080/01457632.2024.2400858
A Nanorod With Near-Perfect Absorption for Efficient Utilization of Solar
Thermal Energy
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yuan Zou Liu Yang Xiaoke Li Caiyan Qin Bin Zhang Xiaohu Wu a College of Electromechanical Engineering; Qingdao University of Science micro/nano optics. He has published about 120 peer-reviewed journal papers.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T06:36:59Z
  DOI: 10.1080/01457632.2024.2400861
Water Thermal Conductivity in Nanoscale and Its Effect on Dropwise
Condensation Heat Transfer
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Dong Niu Xianzhi Chen Hongtao Gao Naval Architecture; multi-scale simulation.
  Pages: 1 - 9
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-11T03:45:24Z
  DOI: 10.1080/01457632.2024.2400866
Two-Dimensional Inverse Method to Estimate the Heat Flux Function in a
Phase Change Material Heat-Exchanger
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mehrzad Jalalizadeh Sahar Noori Vahid Tahmasebi Department of Aerospace Engineering; Amirkabir University of Technology, Tehran, IranMehrzad Jalalizadeh received his B.S. inverse heat conduction problems.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-09-03T12:24:37Z
  DOI: 10.1080/01457632.2024.2392076
Thermal Management of Electronics under Cyclic Heat Loads Using
Graphite-Assisted Heat Sink
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sayan Majumder Rajesh Akula Chakravarthy Balaji Heat Transfer; has undertaken several sponsored research projects. He has authored thirteen books. Currently, he is the Editor-in-Chief of the International Journal of Thermal Sciences.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-31T11:00:03Z
  DOI: 10.1080/01457632.2024.2392077
Chaotic Behavior and Heat Transfer Analysis of Pulsating Flows with
Different Frequencies
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chunhua Min Chenyang Lan Yuanhong Fan Kun Wang Jinqi Hu a School of Energy; liquid heat dissipation in electronic devices.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-26T12:56:24Z
  DOI: 10.1080/01457632.2024.2392078
Performance Assessment of Cold Thermal Storage-Based Building
Air-Conditioning Layouts for Different Climates
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gaurav Singh Ranjan Das Department of Mechanical Engineering; Indian Institute of Technology Ropar, Rupnagar, Punjab, IndiaGaurav Singh is currently working as a Research Associate in the Department of Mechanical Engineering at Indian Institute of Technology Ropar. He did undergraduate degree from Govt. College of Engineering building air-conditioning systems.
  Pages: 1 - 27
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-23T06:08:35Z
  DOI: 10.1080/01457632.2024.2392074
Mechanism of Working Fluid Circulation in the Multisource Organic Solid
Waste Incinerator
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yifan Bie Qiang Cheng Zixue Luo National Key Laboratory of Coal Combustion; control technologies for enriched oxygen combustion.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-22T07:15:18Z
  DOI: 10.1080/01457632.2024.2392079
Heat Enhancement in a Short Air Channel with Solid and Permeable Baffles
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Bader Albusairi Anwaar Albeeshi a Chemical Engineering Department; College of Engineering & Petroleum, Kuwait University, Safat, Kuwaitb Engineering Training & Alumni Center, College of Engineering & Petroleum, Kuwait University, Safat, KuwaitBader Albusairi is an Assistant Professor in the Chemical Engineering Department, College of Engineering waste management.
  Pages: 1 - 21
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-22T07:13:15Z
  DOI: 10.1080/01457632.2024.2392075
Advances in Thermal-Fluid Science and Technology
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lixin Cheng Guodong Xia Ke Wang Afshin J. Ghajar a Beijing Key Laboratory of Heat Transfer; Heat Transfer in Tubes, Mechanical Engineering Series, published by Springer, 2022.
  Pages: 1 - 2
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-14T05:15:51Z
  DOI: 10.1080/01457632.2024.2384151
Experimental Study on Convection Heat Transfer of CO2 in C/SiC Composite
Porous Material at Subcritical, Transcritical, and Supercritical States
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhao-Rui Peng Yi-Zhou Wang Sapargeldi Amangeldiyev Yu-Wei Fan Jing-Zhi Cui Chuan-Jun Liao Jia Liu a Department of Energy; mass transfer of carbon dioxide.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-12T06:47:28Z
  DOI: 10.1080/01457632.2024.2384158
Effect of Fluid-Solid-Thermal Coupling on the Performance of S-Duct in
Hypersonic Inlet
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yuan Lin Yu Yuan Chenglong Wang Chibing Shen Mingbo Sun Yuan Wang Hypersonic Technology Laboratory; College of Aerospace Science microscale phase change heat transfer.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-09T09:31:53Z
  DOI: 10.1080/01457632.2024.2384153
Numerical Simulation of Effects of Catalyst Layer Parameters on Heat
Transfer in Proton Exchange Membrane Fuel Cells
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yitong Li Hang Guo Fang Ye Hao Chen MOE Key Laboratory of Enhanced Heat Transfer; conversion.Hao Chen received the Ph.D. degree at Beijing University of Technology in 2019. He researched the thermal fluid issues of proton exchange membrane fuel cells for more than 10 years. He presides over a project of national natural science foundation of China (Youth Scientific Fund).
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-08T09:47:36Z
  DOI: 10.1080/01457632.2024.2384155
Convective Heat Transfer Analysis of Supercritical CO2 in Artificial Rock
Fractures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sapargeldi Amangeldiyev Yan Wang Yong-Zhi Yang Xin-Rong Zhang a Department of Energy; optimization.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-08T07:46:06Z
  DOI: 10.1080/01457632.2024.2384154
Transport Instabilities of Hazardous Contaminants in a Microscale Soil
Sample Under Thermal Flow of Supercritical CO2
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Karim Ragui Lin Chen Rachid Bennacer a Institute of Engineering Thermophysics; Chinese Academy of Sciences, Beijing, Chinab School of Astronautics more than 320 referenced international journals (Rank A).
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-05T09:28:35Z
  DOI: 10.1080/01457632.2024.2384156
Performance Analysis of Finned-Tube Heat Exchanger Charged with Phase
Change Material for Space Cooling
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Arton Merovci Yunting Ge Xinyu Zhang School of the Built Environment and Architecture; London South Bank University, London, UKArton Merovci is a Research Associate on the Innovate UK (IUK) project, hydrogen storage also skills in modeling different energy systems. She has gained teaching experience as an hourly paid lecturer.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-05T09:25:04Z
  DOI: 10.1080/01457632.2024.2384152
Bubble Separation in a Gas–Liquid Swirling Pipe Flow
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wen Liu Pingnan Huang Nan Wu School of Mechatronic Engineering; conferences.
  Pages: 1 - 11
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-05T09:20:15Z
  DOI: 10.1080/01457632.2024.2384159
Experimental Study on Heat Transfer Enhancement of 3D-Printed Mini Tubes
Under Three Different Flow Directions
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jia Hang Chen Kai Wen Wu Lap Mou Tam Afshin J. Ghajar a Department of Electromechanical Engineering; Faculty of Science Heat Transfer in Tubes, Mechanical Engineering Series, published by Springer, 2022.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-01T12:14:42Z
  DOI: 10.1080/01457632.2024.2384160
Influence of Operation Parameters on Thermohydraulic Performance of
Supercritical CO2 in a Printed Circuit Heat Exchanger
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lei Chai Savvas A. Tassou Centre for Sustainable Energy Use in Food Chain (CSEF); Institute of Energy Futures, Brunel University London, Uxbridge, Middlesex, UKLei Chai is a research fellow at the Institute of Energy Futures, Brunel University London. He received his BSc degree in oil sCO2 heat-to-power cycles.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-08-01T12:12:08Z
  DOI: 10.1080/01457632.2024.2384157
Research on the Impact and Parameters of Liquid-Cooling Garment on Thermal
Comfort
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yaping Zhang Xingke Cui Chenlong Li Mengge Hu Haohao Hao a College of Energy; Xi’an University of Science obtained a master’s degree in 2022. His main research direction is renewable energy utilization.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-23T03:57:23Z
  DOI: 10.1080/01457632.2024.2378560
Enhancing Natural Convection Heat Transfer Through Dome-Shaped Nanofluid
Enclosures: Two-Phase Simulation Analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rafel H. Hameed Qusay Rasheed Al-Amir Hameed K. Hamzah Farooq H. Ali Ali Alahmer a Mechanical Engineering Department; College of Engineering, University of Babylon, Babylon, Iraqb Mechanical Power Technical Engineering Department, College of Engineering conferences.
  Pages: 1 - 26
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-22T05:14:40Z
  DOI: 10.1080/01457632.2024.2378562
Effect of Synthetic Jet on Flow Field over Different Shaped Ribs and Its
Impact on Heat Transfer
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sushanta Dutta Shantanu a Mechanical & Industrial Engineering Department; IIT Roorkee, Roorkee, Uttarakhand, Indiab Flow Control passive flow control techniques for heat transfer applications using the liquid crystal thermography technique.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-18T06:10:44Z
  DOI: 10.1080/01457632.2024.2378559
Effect of Jet-to-Target Spacing on Flow and Heat Transfer Characteristics
for Swirling Impinging Micro-Slot Jets
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Natthaporn Kaewchoothong Chayut Nuntadusit Surapong Chatpun a Department of Mechanical; numerical modeling.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-17T12:43:49Z
  DOI: 10.1080/01457632.2024.2378564
Double-Diffusive Natural Convection in L-Shaped Cavity by Lattice
Boltzmann Method: Numerical Study
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Parthasarathy Rajesh Kanna Anbalagan Satheesh Senthil Kumar Arumugam Hakan Fehmi Öztop Neelamegam Rajan Devi a CO2 Research; characterization for heat transfer applications.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-17T10:43:50Z
  DOI: 10.1080/01457632.2024.2378561
Investigation of Laminar Forced and Mixed Convection in Horizontal Mini
Tubes with Uniform Wall Heat Flux Boundary Condition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yi Fan Yang Lap Mou Tam Afshin J. Ghajar a Department of Electromechanical Engineering; Faculty of Science Heat Transfer in Tubes, Mechanical Engineering Series, published by Springer, 2022.
  Pages: 1 - 12
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-15T03:34:40Z
  DOI: 10.1080/01457632.2024.2378558
Experimental and Comparative Heat Transfer Analysis of Heat Exchanger with
Surface Modification
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chinnadurai Dineshbabu Nallasamy Shivasankaran Krishnan Venkatesh Raja Rathinavelu Venkatesh a Department of Mechanical Engineering; Kongunadu College of Engineering research.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-13T02:10:56Z
  DOI: 10.1080/01457632.2024.2378563
Analysis of mixing enhancement ability of bypass dual throat nozzle with
single/multi-tabs
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ruifeng Pan Jinglei Xu Yuqi Zhang Bingsong Lan Shuai Huang Jiangsu Province Key Laboratory of Aerospace Power System; Nanjing University of Aeronautics published more than 10 papers. He is the main recipient of the gold medal of the Geneva International Invention Exhibition.
  Pages: 1 - 20
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-03T11:07:02Z
  DOI: 10.1080/01457632.2024.2368430
Assessment of Multi-Physical Fields Reconstruction Approaches in
Three-Dimensional Supersonic Flow with Shocks
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jie Tian Jinglei Xu Junfei Zhou Han Dong Jiang Su Province Key laboratory of Aerospace Power System; College of Energy experimental fluid mechanics.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-03T05:54:19Z
  DOI: 10.1080/01457632.2024.2368438
The Spatial Development Characteristics of High-Pressure Methane Jet
Impinging on Methane Lean-Burn Premixed Flame
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yan Lei Ying Wang Tao Qiu Huihui Chen College of Mechanical; combustion in internal combustion engines.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-03T03:33:01Z
  DOI: 10.1080/01457632.2024.2368436
Investigation of Thermal Performance of Optimized Tree-Shaped Fins in
Latent Heat Storage Units
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhaoyang He Li Yang Wei Yang Ke Tian Jin Wang a School of Energy; building intelligent control.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-03T01:37:21Z
  DOI: 10.1080/01457632.2024.2368435
Numerical Study on the Dynamics of a Liquid Nitrogen Droplet Impacting on
a Liquid Nitrogen Film
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Qingshuo Miao Xiufang Liu Yiming Liu Jiajun Chen Yanan Li Yu Hou a School of Energy; cryogenic multi-phase flow.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-01T12:04:36Z
  DOI: 10.1080/01457632.2024.2368439
Numerical study of uranium hexafluoride desublimation process based on
Eulerian two-phase model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rui Qiu Zhaofei Tian Hao Yan Huilun Kang Jun Che Zhongdi Wu Hongyue Zeng a Fundamental Science on Nuclear Safety; process optimization.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-01T10:48:59Z
  DOI: 10.1080/01457632.2024.2368426
Effects of the Slotted-Cavity Tip on the Vortices and Aerothermal
Performance in the High-Pressure Turbine
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lei Li Chenglong Wang Yuan Wang Jianjun Zou Junbing Liu Chuanqi Tu Hypersonic Technology Laboratory; College of Aerospace Science thermodynamics of turbomachinery.Chuanqi Tu is a postgraduate student in the Hypersonic Technology Laboratory of the National University of Defense Technology, directed by associate researcher Chenglong Wang. He is currently engaged in large eddy simulation research of turbine blades.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-01T10:38:36Z
  DOI: 10.1080/01457632.2024.2368424
Selected Papers from the 4th International Symposium on Thermal-Fluid
Dynamics (ISTFD 2023)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jinglei Xu Bofeng Bai Junfei Zhou Haibin Zhang Lixin Cheng Afshin J. Ghajar a State Key Laboratory of Mechanics; Heat Transfer in Tubes, Mechanical Engineering Series, published by Springer, 2022.
  Pages: 1 - 3
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-07-01T04:21:09Z
  DOI: 10.1080/01457632.2024.2368423
Unique Operating Conditions Analysis of Turboshaft Engines Based on
Nonlinear Integrated Model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yujie Zhao Xizhen Song Zhiping Li Xingyu Zhu Xinqian Zheng a Research Institute of Aero-Engine; Beihang University, Beijing, Chinab School of Aerospace Engineering, Tsinghua University, Beijing, ChinaYujie Zhao is a doctoral candidate at the Research Institute of Aero-Engine, Beihang University, Beijing, China. Her research focuses on aerodynamic stability Technology.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-26T04:50:33Z
  DOI: 10.1080/01457632.2024.2368433
A Modified Model of Micro-Scale Gas Seepage in Rock Porous Media
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jimin Xu Tianwang Lai Zhenhui Chen Tian Lan Xiangyang Liu Maogang He Key Laboratory of Thermal Fluid Science; thermophysical properties of fluids.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-26T04:43:59Z
  DOI: 10.1080/01457632.2024.2368427
Experimental Investigation on Air-Water Two-Phase Flow Pattern and
Pressure Drop in Vertical Upward Annulus
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nailiang Li Changsong Liu Xurui Peng Xueping Du School of Low-carbon Energy; the application of artificial intelligence in thermal engineering. He has published more than 60 papers in international journals or conferences. He is also a reviewer for several journals.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-25T02:19:34Z
  DOI: 10.1080/01457632.2024.2368432
Fouling and Corrosion Behavior of
Nickel–Graphene/Polytetrafluoroethylene Composite Hydrophobic Coating
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Muhammad Zafar Ullah Mingyan Liu Jizhe He Muhammad Chawla a School of Chemical Engineering; surface modification.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-24T06:59:49Z
  DOI: 10.1080/01457632.2024.2368425
Three-Dimensional Lattice Boltzmann Simulations for Droplet Impact and
Freezing on Cold Surfaces with a Large Density Ratio
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yunjie Xu Linlin Tian Chunling Zhu Ning Zhao a College of Aerospace Engineering; Nanjing University of Aeronautics deicing simulation, as well as multiphase flow. Up to now, he has published more than 250 journal papers.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-24T06:58:47Z
  DOI: 10.1080/01457632.2024.2368434
Asymptotic analysis of fluid thermodynamic behaviors in the near-critical
region under highly variable physical properties
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rui Zhang Lin Chen a Institute of Engineering Thermophysics; Chinese Academy of Sciences, Beijing, PR Chinab School of Astronautics Engineering (AUTSE) in 2018 due to his contribution to supercritical fluid thermodynamics.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-24T06:50:03Z
  DOI: 10.1080/01457632.2024.2368431
Real Gas Corrections Based on the Interaction of One-Dimensional Unsteady
Waves in a Shock Tube
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Decong Zhang Yuqiang Dai Ning Yu Mohan Li College of Chemical Engineering; Dalian University of Technology, Dalian, P.R. ChinaDecong Zhang is currently pursuing a master’s degree in chemical process mechanical at Dalian University of Technology. He graduated from College of Chemical Engineering, Dalian University of Technology with a bachelor’s degree in process equipment wave rotors.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-24T02:39:30Z
  DOI: 10.1080/01457632.2024.2368429
Effect of Exhaust Pipe Size on Separation Efficiency of Cyclone Separator
Used in Power Plant
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ruixiang Wang Haixia Li Zhiheng Song School of Mechanical; heat transfer. During his postgraduate studies, he published two SCI journal papers as a second author.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-24T02:39:15Z
  DOI: 10.1080/01457632.2024.2368437
Boosting Solidification Rates in a Triplex-Tube Thermal Storage System
Using Circular Fins: Novel Staggered and Inline Fin Arrangements
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hosseinali Ramezani Mouziraji Mohammadreza Ebrahimnataj Tiji Azher M. Abed Abolfazl Ebrahimnataj Tiji Hayder I. Mohammed Jasim M. Mahdi Pouyan Talebizadehsardari Amir Keshmiri a Department of Mechanical Engineering; Tarbiat Modares University, Tehran, Iranb Department of Mechanical Engineering, Qom University of Technology, Qom, Iranc Air conditioning his research has successfully led to several companies.
  Pages: 1 - 22
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-18T04:13:13Z
  DOI: 10.1080/01457632.2024.2362539
Thermal Performance of Conventional-Metal and Novel-Plastic Drain Water
Heat Recovery Device
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ezra Ovadia Tasnim Alam Aurora Duran Mostafa H. Sharqawy School of Engineering; College of Engineering holds 12 issued US patents that have been commercialized in the water industry.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-11T07:38:04Z
  DOI: 10.1080/01457632.2024.2362542
Frost Formation over an Inclined Plate Under Natural Convection with
Lattice–Boltzmann Method
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Gholamreza Seddigh Ali Reza Tahavvor Department of Mechanical Engineering; Shiraz Branch, Islamic Azad University, Shiraz, IranGholamreza Seddigh is a Ph.D. candidate in mechanical engineering in the Department of Mechanical Engineering, Shiraz Branch, Islamic Azad University, Shiraz, Iran. He received his B.S. degree in mechanical engineering from the same university computational heat transfer.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-11T07:35:58Z
  DOI: 10.1080/01457632.2024.2362541
Effect of Upwind and Downwind Directions of Right-Trapezoidal
Winglet-Vortex-Generators in a Solar-Air-Heater
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Roytor Charoensin-O-larn Boonchai Lertnuwat Department of Mechanical Engineering; Faculty of Engineering, Chulalongkorn University, Bangkok, ThailandRoytor Charoensin-O-larn is a Lecturer in the Department of Mechanical Engineering, Chulalongkorn University, Bangkok, Thailand. He earned his Ph.D. in Mechanical Engineering from the University of Washington, USA in 2022. His research interests include computational fluid dynamics recently he has been studying the thermo-hydraulic performance of winglet vortex generators in solar air heaters.
  Pages: 1 - 18
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-11T07:32:15Z
  DOI: 10.1080/01457632.2024.2362537
Modeling of Additively Manufactured Ceramic Heat Exchangers with
Semi-Elliptical Cross-Section Flow Channels
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wenhua Yu David M. France Wenchao Du Dileep Singh Applied Materials Division; Argonne National Laboratory, Lemont, IL, USAWenhua Yu is a principal Mechanical Engineer in the Applied Materials Division of Argonne National Laboratory. He received his Ph.D. from Zhejiang University (China). Prior to joining Argonne National Laboratory in 1998, he was an Associate Professor in the Department of Mechanical Engineering at Zhejiang University. He has published two scientific books, four technical reports, the American Society of Ceramics.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-08T09:39:01Z
  DOI: 10.1080/01457632.2024.2355834
Effect of Obstacle Shape on Natural Convection in Partially Open Square
Enclosure
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sonu Kumar Swarup Kumar Mahapatra School of Mechanical Sciences; Indian Institute of Technology, Bhubaneswar, Odisha, IndiaSonu Kumar is a research scholar in the School of Mechanical Sciences at Indian Institute of Technology Bhubaneswar. His research activities focus on experimental flow in porous medium.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-07T12:16:38Z
  DOI: 10.1080/01457632.2024.2362540
Impact of Eccentric Tube Shapes and Heat Pipes on Phase Change
Material’s Thermal Charging
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jayesh Kumar Pushpendra Singh Rajesh Kumar a Department of Applied Sciences; Maharaja Surajmal Institute of Technology, Delhi, Indiab Department of Mechanical Engineering, Delhi Technological University, Delhi, IndiaJayesh Kumar is presently pursuing his Ph.D as a research scholar in Delhi Technical University, Delhi, India. He has more than twelve years of teaching experience fellow of Institution of Engineers.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-06T09:11:14Z
  DOI: 10.1080/01457632.2024.2362538
Correction for Nusselt Number Correlations of Transcritical Methane Based
on Radial Velocity Distribution
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Meng Zhang Wubing Miao Yang Li Huangjun Xie Shumiao Zhu Shanghai Aerospace System Engineering Institute; Shanghai, People’s Republic of ChinaMeng Zhang is an engineer in the Shanghai Aerospace System Engineering Institute. He received his B.Sc. degree in aircraft design engineering in 2015 hybrid transmission system design.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-06-03T10:21:55Z
  DOI: 10.1080/01457632.2024.2355839
Crystallization Fouling on Different Surfaces under Static and Dynamic
Experiments
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Juan Xiao Yuheng Zhang Sophie Wang Simin Wang a School of Chemical Engineering; ultra-fine powder technology.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-28T12:02:21Z
  DOI: 10.1080/01457632.2024.2355837
Utilizing Reversed Brayton Cycle for Enhanced Cooling Tower Technology
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Avijit Karmakar Basile C. Salomon Sumanta Acharya Aleksandr Kozlov Yaroslav Chudnovsky a Mechanical; Materials, patents.
  Pages: 1 - 15
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-24T12:55:21Z
  DOI: 10.1080/01457632.2024.2355836
Validation of Continuous Conjugate Heat Transfer Model through
Experimental Data
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Navid Erfani Digby Symons Conan Fee Matthew James Watson a Department of Chemical; coordinates the final year design projects for chemical engineering students.
  Pages: 1 - 9
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-22T11:58:17Z
  DOI: 10.1080/01457632.2024.2355835
Thermal Systems Modeling and Control of Flex-Fuel Combustion Engines for
Real-Time Applications
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Marcos Henrique Carvalho SilvaAndré Vinícius Oliveira MaggioArmando Antônio Maria LaganáDemerson MoscardiniBruno Silva PereiraJoão Francisco Justoa Laboratory of Bioenergy; embedded electronics.
  Pages: 1 - 19
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-21T12:31:44Z
  DOI: 10.1080/01457632.2024.2355838
Performance and Emission Measurement of Spark Ignition Engines Operating
with 100% Methanol Fuel
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Prasad Boggavarapu Ashwin Bangar Mallikarjun Himabindu Mendu Varatharaj Naayam Ramraju Sampathkumar Krishnamachari Sunil Kumar Pandey Shri Krishnan Sadagopan R. V. Ravikrishna a Engines; Hindustan Aeronautics Limited (HAL).
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-20T01:04:59Z
  DOI: 10.1080/01457632.2024.2347177
Effect of Using Fractals as Grain Configuration on the Performance of
Solid Rocket Motors
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Soham Bhattacharya Raghav Mundhra a Mechanical Engineering Department; Jadavpur University, Kolkata, Indiab Mechanical Engineering Department, Indian Institute of Technology, Kharagpur, IndiaSoham Bhattacharya is a third-year undergraduate student at the Department of Mechanical Engineering, Jadavpur University, Kolkata, India. His primary research interests lie in the field of aerospace propulsion, combustion stability, thermodynamics. He has authored three conference papers.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-09T08:40:51Z
  DOI: 10.1080/01457632.2024.2347178
Selected Papers from the 27th National Conference on Internal Combustion
Engines and Combustion (NCICEC 2022)
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ekambaram Porpatham Parthasarathy Rajesh Kanna Mohamed Ibrahim Mohamed Ilyas Ramesh Kumar Chidambaram Arunachalam Rammohan a Automotive Research Centre; Vellore Institute of Technology, Vellore, Indiab CO2 Research abroad. Recently his two patents have been granted by Indian Patent Office.
  Pages: 1 - 2
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-07T07:44:30Z
  DOI: 10.1080/01457632.2024.2347169
Numerical Investigation of Thermohydraulic Characteristics in
Supercritical CO2 Natural Circulation Loop with Spatially Varying
Temperature
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Vignesh Boopalan Parthasarathy Rajesh Kanna Senthil Kumar Arumugam a CO2 Research; conferences. He is a fellow of Institution of Engineers, India.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-07T07:35:39Z
  DOI: 10.1080/01457632.2024.2347176
Investigations on a Spark Ignition Engine, Part I: Fuelled With Biogas
Extracted From Sewage
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Charles Benjamin Essuman Ekambaram Porpatham a School of Mechanical Engineering; Vellore Institute of Technology, Vellore, Indiab Automotive Research Centre, Vellore Institute of Technology, Vellore, IndiaCharles Benjamin Essuman received his PhD in the School of Mechanical Engineering at Vellore Institute of Technology, Vellore, India. He received his M.Tech. in Automotive Engineering at the University of Education, Winneba. Kumasi Campus, Ghana. His main research activities are focused on the use of biogas use of gaseous fuels in spark ignition engines.
  Pages: 1 - 13
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-06T01:16:22Z
  DOI: 10.1080/01457632.2024.2347172
JetA1, JP10 and Their Nano-Boron Slurries Combustion in Atmospheric
Pressure Slinger Combustor
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chitradurga Subrahmanya Bhaskar Dixit Appathurai Venugopalan Sowriraajan Annaiappa Shivakumar Prasanna Gorby Dsouza Hanasoge Suryanarayana Avadhany Mukunda Fire; fire science.
  Pages: 1 - 16
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-06T01:15:27Z
  DOI: 10.1080/01457632.2024.2347171
Investigations on a Spark Ignition Engine, Part II: Impact of Hydrogen
Addition and Compression Ratio on a Biogas-Fuelled Engine
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Charles Benjamin Essuman Ekambaram Porpatham a School of Mechanical Engineering; Vellore Institute of Technology, Vellore, Indiab Automotive Research Centre, Vellore Institute of Technology, Vellore, IndiaCharles Benjamin Essuman, registered his PhD in the School of Mechanical Engineering at Vellore Institute of Technology, Vellore, India. He received his M.Tech. in Automotive Engineering at the University of Education, Winneba. Kumasi Campus, Ghana. His main research activities are focused on the use of biogas use of gaseous fuels in SI engines.
  Pages: 1 - 10
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-03T07:45:35Z
  DOI: 10.1080/01457632.2024.2347173
Development of Sustainable Biofuel from Seed Waste Using Pyrolysis and Its
Sustainability in the Compression Ignition Engine Application
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kuppan Baskaran Cigurupadi Ganesan Mohan School of Mechanical Engineering; Vellore Institute of Technology, Vellore, IndiaKuppan Baskaran is a Full-time Ph.D. scholar in the School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India, He is currently working on sustainable fuel production renewable waste.
  Pages: 1 - 17
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-03T07:44:36Z
  DOI: 10.1080/01457632.2024.2347170
A Simplified Correlation for Burning Velocity of Gaseous Fuel-Air Mixtures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hanasoge Suryanarayana Avadhany Mukunda Annaiappa Shivakumar Fire; combustion.
  Pages: 1 - 11
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-02T07:51:08Z
  DOI: 10.1080/01457632.2024.2347179
Experimental Studies on the Jatropha-Biogas Dual Fuel Engine
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Subramanian Jayagopal Ekambaram Porpatham Senthil Kumar Arumugam a School of Mechanical Engineering; Vellore Institute of Technology, Vellore, Indiab Automotive Research Centre, Vellore Institute of Technology, Vellore, Indiac School of Mechanical Engineering, VIT Bhopal University, Bhopal, IndiaSubramanian Jayagopal received his PhD in the School of Mechanical Engineering at Vellore Institute of Technology, Vellore, India. He received his M.Tech. in Automotive Engineering at Madras Institute of Technology, Anna University, Chennai, India. His main research activities are focused on the use of biogas internal combustion engines.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-02T07:38:58Z
  DOI: 10.1080/01457632.2024.2347175
Energy and Exergy Analysis of an Ejector Expansion Transcritical Carbon
Dioxide Air Conditioning System
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jobel Jose Parthasarathy Rajesh Kanna Senthil Kumar Arumugam a School of Mechanical Engineering; Vellore Institute of Technology, Vellore, Indiab CO2 Research conferences. He is a fellow of Institution of Engineers, India.
  Pages: 1 - 14
  Abstract: .
  
  Citation: Heat Transfer Engineering
  PubDate: 2024-05-02T07:37:10Z
  DOI: 10.1080/01457632.2024.2347174

HOME > Browse the 73 Subjects covered by JournalTOCs
Subject	Total Journals