Please help us test our new pre-print finding feature by giving the pre-print link a rating. A 5 star rating indicates the linked pre-print has the exact same content as the published article.
First page: 111012 Abstract: AbstractManual wheelchair (MWC) locomotion exposes the user's upper-body to large and repetitive loads, which can lead to upper limbs pain and injuries. A thinner understanding of the influence of MWC settings on propulsion biomechanics could allow for a better adaptation of MWC configuration to the user, thus limiting the risk of developing such injuries. Advantageously compared to experimental studies, simulation methods allow numerous configurations to be tested. Recent studies have developed predictive locomotion simulation using optimal control methods. However, those models do not consider MWC anteroposterior stability, potentially resulting in unreasonable propulsion strategies. To this extent, this study aimed at confirming if constraining MWC anteroposterior stability in the optimal control formulation could lead to a different simulated movement. For this purpose, a four-link rigid-body system was used in a forward dynamics optimization paired with an anteroposterior stability constraint to predict MWC locomotion dynamics of the upper limbs during both startup and steady-state propulsion. Simulation results indicated the occurrence of MWC tipping when stability was not constrained, and that the constrained optimal control algorithm predicted different propulsion strategies. Hence, further proceedings of MWC locomotion simulation and optimal control investigations should take the anteroposterior stability into account to achieve more realistic simulations. Additionally, the implementation of the anteroposterior stability constrains unexpectedly resulted in a reduction of the computational time. PubDate: Thu, 14 Sep 2023 00:00:00 GMT DOI: 10.1115/1.4063274 Issue No:Vol. 145, No. 11 (2023)
Please help us test our new pre-print finding feature by giving the pre-print link a rating. A 5 star rating indicates the linked pre-print has the exact same content as the published article.
First page: 111013 Abstract: AbstractThe determination of bone mechanical properties remains crucial, especially to feed up numerical models. An original methodology of inverse analysis has been developed to determine the longitudinal elastic modulus of femoral cortical bone. The method is based on a numerical twin of a specific three-point bending test. It has been designed to be reproducible on each test result. In addition, the biofidelity of the geometric acquisition method has been quantified. As the assessment is performed at the scale of a bone shaft segment, the Young's modulus values obtained (between 9518.29 MPa and 14181.15 MPa) are considered average values for the whole tissue, highlighting some intersubject variability. The material microstructure has also been studied through histological analysis, and bone-to-bone comparisons highlighted discrepancies in quadrants microstructures. Furthermore, significant intrasubject variability exists since differences between the bone's medial-lateral and anterior–posterior quadrants have been observed. Thus, the study of microstructures can largely explain the differences between the elastic modulus values obtained. However, a more in-depth study of bone mineral density would also be necessary and would provide some additional information. This study is currently being setup, alongside an investigation of the local variations of the elastic modulus. PubDate: Thu, 14 Sep 2023 00:00:00 GMT DOI: 10.1115/1.4063100 Issue No:Vol. 145, No. 11 (2023)
Subscription journal
[25 journals]
