JournalTOCs

About Help News

Additive Manufacturing Letters
Number of Followers: 3

This is an Open Access Journal

Open Access journal
ISSN (Online) 2772-3690
Published by Elsevier

[2906 journals]

Embedding Components During Laser Sintering
- Abstract: Publication date: Available online 17 May 2022Source: Additive Manufacturing LettersAuthor(s): John Whitehead, Hod Lipson
A graph-based algorithm for slicing unstructured mesh files
- Abstract: Publication date: Available online 17 May 2022Source: Additive Manufacturing LettersAuthor(s): Sunil Bhandari
Uniform Fatigue Damage Tolerance Assessment for Additively Manufactured
and Cast Al-Si Alloys: An Elastic-Plastic Fracture Mechanical Approach
- Abstract: Publication date: Available online 14 May 2022Source: Additive Manufacturing LettersAuthor(s): Jochen Tenkamp, Felix Stern, Frank Walther
Analysis of hierarchical microstructural evolution in electron beam powder
bed fusion Ti–6Al–4V alloys via time-of-flight neutron diffraction
- Abstract: Publication date: Available online 8 May 2022Source: Additive Manufacturing LettersAuthor(s): Manami Mori, Kenta Yamanaka, Yusuke Onuki, Shigeo Sato, Akihiko Chiba
Bulk-Like Ductility of Cold Spray Additively Manufactured Copper in the
As-Sprayed State
- Abstract: Publication date: Available online 4 May 2022Source: Additive Manufacturing LettersAuthor(s): Reeti Singh, Jan Kondás, Christian Bauer, Jan Cizek, Jan Medricky, Stefan Csaki, Jan Čupera, Radek Procházka, Daniel Melzer, Pavel Konopik
Enabling Part-Scale Scanwise Process Simulation for Predicting Melt Pool
Variation in LPBF by Combining GPU-based Matrix-free FEM and Adaptive
Remeshing
- Abstract: Publication date: Available online 3 May 2022Source: Additive Manufacturing LettersAuthor(s): Alaa Olleak, Florian Dugast, Prajwal Bharadwaj, Seth Strayer, Shawn Hinnebusch, Sneha Narra, Albert C. To
Investigation of pore formation mechanisms induced by spherical-powder
delivery in directed energy deposition using in situ high-speed X-ray
imaging
- Abstract: Publication date: Available online 29 April 2022Source: Additive Manufacturing LettersAuthor(s): Hui Wang, Frank E. Pfefferkorn, Sarah J. Wolff
Improving fatigue performance of metal parts with up-facing inclined
surfaces produced by Laser Powder Bed Fusion and in-situ laser remelting
- Abstract: Publication date: Available online 26 April 2022Source: Additive Manufacturing LettersAuthor(s): Daniel Ordnung, Jitka Metelkova, Antonio Cutolo, Brecht Van Hooreweder
The intelligent recoater: a new solution for in-situ monitoring of
geometric and surface defects in powder bed fusion
- Abstract: Publication date: Available online 22 April 2022Source: Additive Manufacturing LettersAuthor(s): Matteo Bugatti, Bianca Maria Colosimo
Scan Path Resolved Thermal Modelling of LPBF
- Abstract: Publication date: Available online 11 April 2022Source: Additive Manufacturing LettersAuthor(s): Emil Duong, Lukas Masseling, Christian Knaak, Paul Dionne, Mustafa Megahed
A Process Parameter Predictive Framework for Laser Cladding of
Multi-principal Element Alloys
- Abstract: Publication date: Available online 5 April 2022Source: Additive Manufacturing LettersAuthor(s): Praveen Sreeramagiri, Ganesh Balasubramanian
Printability of low-cost pre-heat-treated ball milled Al7075 powders using
compressed air assisted cold spray additive manufacturing
- Abstract: Publication date: Available online 5 April 2022Source: Additive Manufacturing LettersAuthor(s): K. Prasad, M.A. Khalik, N. Hutasoit, R. A. Rahman Rashid, R. Rashid, A. Duguid, S. Palanisamy
Crack growth in conventionally manufactured pure nickel, titanium and
aluminum and the cold spray additively manufactured equivalents
- Abstract: Publication date: Available online 22 March 2022Source: Additive Manufacturing LettersAuthor(s): Rhys Jones, Ondrej Kovarik, Jan Cizek, Andrew Ang, Jeff Lang
Erratum regarding missing Declaration of competing interest statement in
previously published article
- Abstract: Publication date: April 2022Source: Additive Manufacturing Letters, Volume 2Author(s):
Heterogeneous Quality Characterization and Modeling of Thin Wall Structure
in Additive Manufacturing
- Abstract: Publication date: Available online 10 March 2022Source: Additive Manufacturing LettersAuthor(s): Ruimin Chen, Edward W. Reutzel, Mojtaba Khanzadeh, Farhad Imani
Stable cladding of high reflectivity pure copper on the aluminum alloy
substrate by an infrared-blue hybrid laser
- Abstract: Publication date: December 2022Source: Additive Manufacturing Letters, Volume 3Author(s): Huihui Yang, Jiayin Wu, Qianglong Wei, Zijue Tang, An Wang, Xinyuan Jin, Xianfeng Li, Yi Wu, Guojie Lu, Haowei Wang, Hongze Wang
Powder Spreading over Realistic Laser Melted Surfaces in Metal Additive
Manufacturing
- Abstract: Publication date: Available online 25 February 2022Source: Additive Manufacturing LettersAuthor(s): Arden Phua, Peter S. Cook, Chris H.J. Davies, Gary W. Delaney
Comparison of LPBF Processing of AlSi40 Alloy using Blended and
Pre-Alloyed Powder
- Abstract: Publication date: Available online 18 February 2022Source: Additive Manufacturing LettersAuthor(s): Rebecca Garrard, Donal Lynch, Luke N. Carter, Nicholas J.E. Adkins, Rodolfe Gie, Estelle Chouteau, Laurent Pambaguian, Moataz M. Attallah
Influence of Reduced Carbon Content on Microstructure and Mechanical
Behavior of Inconel 718 Prepared by Laser Powder Bed Fusion
- Abstract: Publication date: Available online 18 February 2022Source: Additive Manufacturing LettersAuthor(s): Tait D. McLouth, David B. Witkin, Julian R. Lohser, Glenn E. Bean, Paul M. Adams, Zachary R. Lingley, Rafael J. Zaldivar
Micro Wire and Arc Additive Manufacturing (µ-WAAM)
- Abstract: Publication date: Available online 4 February 2022Source: Additive Manufacturing LettersAuthor(s): J.P. Oliveira, Francisco M. Gouveia, Telmo G. Santos
Process Planning for Additive Manufacturing of Geometries with Variable
Overhang Angles using a Robotic Laser Directed Energy Deposition system
- Abstract: Publication date: Available online 31 January 2022Source: Additive Manufacturing LettersAuthor(s): Farzaneh Kaji, Arackal Narayanan Jinoop, Mark Zimny, German Frikel, Kyle Tam, Ehsan Toyserkani
Microstructure and Mechanical Properties of Ti6Al4V Alloys Fabricated by
Additive Friction Stir Deposition
- Abstract: Publication date: Available online 31 January 2022Source: Additive Manufacturing LettersAuthor(s): Ehsan Farabi, Steven Babaniaris, Matthew R. Barnett, Daniel M. Fabijanic
A Numerical Formalism Towards Finding a Good Component Orientation in
Laser Powder Bed Fusion
- Abstract: Publication date: Available online 26 January 2022Source: Additive Manufacturing LettersAuthor(s): Jörg Willems, Mustafa Megahed
Design of an In-situ Microscope for Selective Laser Sintering
- Abstract: Publication date: Available online 25 January 2022Source: Additive Manufacturing LettersAuthor(s): Douglas M. Sassaman, Matthew S. Ide, Desiderio Kovar, Joseph J. Beaman
Catalyzed frontal polymerization-aided 3D Printing of Epoxy Thermosets
- Abstract: Publication date: Available online 19 January 2022Source: Additive Manufacturing LettersAuthor(s): Zimeng Zhang, Chongjie Gao, Ruochen Liu, Wei Li, Jingjing Qiu, Shiren Wang
Directed energy deposition and characterization of high-speed steels with
high vanadium content
- Abstract: Publication date: Available online 11 January 2022Source: Additive Manufacturing LettersAuthor(s): Sravya Tekumalla, Riccardo Tosi, Xipeng Tan, Matteo Seita
Crack mitigation in laser engineered net shaping of WC-10wt%FeCr cemented
carbides
- Abstract: Publication date: Available online 10 January 2022Source: Additive Manufacturing LettersAuthor(s): E. Molobi, N. Sacks, M. Theron
Conformal 3D Printing of a Polymeric Tactile Sensor
- Abstract: Publication date: Available online 6 January 2022Source: Additive Manufacturing LettersAuthor(s): Omar Faruk Emon, Faez Alkadi, Mazen Kiki, Jae-Won Choi
Printability, mechanical and degradation properties of Mg-(x)Zn elemental
powder mixes processed by laser powder bed fusion
- Abstract: Publication date: Available online 5 January 2022Source: Additive Manufacturing LettersAuthor(s): Francesco D'Elia, Kerstin van Gaalen, Muzi Li, Savko Malinov, Alexander Kopp
Observations on comparable aluminium alloy crack growth curves: additively
manufactured Scalmalloy® as an alternative to AA5754 and AA6061-T6
alloys'
- Abstract: Publication date: Available online 3 January 2022Source: Additive Manufacturing LettersAuthor(s): Rhys Jones, Jan Cizek, Ondrej Kovarik, Andrew Ang, Victor Champagne
Multi-faceted monitoring of powder flow rate variability in directed
energy deposition
- Abstract: Publication date: Available online 25 December 2021Source: Additive Manufacturing LettersAuthor(s): Felicity S.H.B. Freeman, B Thomas, L Chechik, Iain Todd

JournalTOCs
School of Mathematical and Computer Sciences
Heriot-Watt University
Edinburgh, EH14 4AS, UK
Email: journaltocs@hw.ac.uk
Tel: +00 44 (0)131 4513762

Your IP address: 44.192.25.113

Home (Search)
API
About JournalTOCs
News (blog, publications)