Subjects -> MANUFACTURING AND TECHNOLOGY (Total: 363 journals)
    - CERAMICS, GLASS AND POTTERY (31 journals)
    - MACHINERY (34 journals)
    - MANUFACTURING AND TECHNOLOGY (223 journals)
    - METROLOGY AND STANDARDIZATION (6 journals)
    - PACKAGING (19 journals)
    - PAINTS AND PROTECTIVE COATINGS (4 journals)
    - PLASTICS (42 journals)
    - RUBBER (4 journals)

MANUFACTURING AND TECHNOLOGY (223 journals)                  1 2     

Showing 1 - 73 of 73 Journals sorted alphabetically
3D Printing and Additive Manufacturing     Full-text available via subscription   (Followers: 27)
Additive Manufacturing     Hybrid Journal   (Followers: 18)
Additive Manufacturing Letters     Open Access   (Followers: 3)
Advanced Composites and Hybrid Materials     Hybrid Journal   (Followers: 2)
Advanced Industrial and Engineering Polymer Research     Open Access   (Followers: 4)
Advanced Manufacturing: Polymer & Composites Science     Open Access   (Followers: 38)
Advances in Adaptive Data Analysis     Hybrid Journal   (Followers: 9)
Advances in Industrial and Manufacturing Engineering     Open Access   (Followers: 3)
Advances in Manufacturing     Hybrid Journal   (Followers: 9)
Advances in Manufacturing Science and Technology     Open Access   (Followers: 10)
Advances in Materials and Processing Technologies     Hybrid Journal   (Followers: 1)
Advances in Technology Innovation     Open Access   (Followers: 5)
Afrique Science : Revue Internationale des Sciences et Technologie     Open Access   (Followers: 1)
American Journal of Applied Sciences     Open Access   (Followers: 22)
American Journal of Sensor Technology     Open Access   (Followers: 2)
Appita Journal: Journal of the Technical Association of the Australian and New Zealand Pulp and Paper Industry     Full-text available via subscription   (Followers: 6)
Applied Ergonomics     Hybrid Journal   (Followers: 17)
Asia Pacific Biotech News     Hybrid Journal   (Followers: 3)
Asian Journal of Applied Sciences     Open Access   (Followers: 2)
Australian Journal of Learning Difficulties     Hybrid Journal   (Followers: 8)
Australian TAFE Teacher     Full-text available via subscription   (Followers: 4)
Behavioral and Cognitive Neuroscience Reviews     Hybrid Journal   (Followers: 25)
Bio-Design and Manufacturing     Hybrid Journal  
Biomanufacturing Reviews     Full-text available via subscription  
Biotechnology     Open Access   (Followers: 7)
Biotechnology Progress     Hybrid Journal   (Followers: 42)
Bulletin of Science, Technology & Society     Hybrid Journal   (Followers: 9)
Centaurus     Hybrid Journal   (Followers: 7)
China Foundry     Open Access  
Circuit World     Hybrid Journal   (Followers: 16)
Clay Technology     Full-text available via subscription  
Cold Regions Science and Technology     Hybrid Journal   (Followers: 2)
Comparative Technology Transfer and Society     Full-text available via subscription   (Followers: 4)
Components, Packaging and Manufacturing Technology, IEEE Transactions on     Hybrid Journal   (Followers: 27)
Composites Science and Technology     Hybrid Journal   (Followers: 150)
Computer-Aided Design and Applications     Hybrid Journal   (Followers: 6)
Conference Quality Production Improvement     Open Access  
Control Theory and Informatics     Open Access   (Followers: 9)
Control Theory and Technology     Hybrid Journal   (Followers: 2)
Cryoletters     Full-text available via subscription   (Followers: 4)
Current Protocols in Essential Laboratory Techniques     Full-text available via subscription  
Current Research in Nanotechnology     Open Access   (Followers: 23)
Decision Making : Applications in Management and Engineering     Open Access   (Followers: 1)
Decision Making in Manufacturing and Services     Open Access   (Followers: 2)
Design Journal : An International Journal for All Aspects of Design     Hybrid Journal   (Followers: 33)
Design Studies     Hybrid Journal   (Followers: 35)
Economics of Innovation and New Technology     Hybrid Journal   (Followers: 19)
Emerging Materials Research     Hybrid Journal   (Followers: 1)
Environmental Technology     Hybrid Journal   (Followers: 2)
Fibers     Open Access   (Followers: 4)
Fibers and Polymers     Full-text available via subscription   (Followers: 4)
Foresight     Hybrid Journal   (Followers: 7)
FORMakademisk - forskningstidsskrift for design og designdidaktikk     Open Access   (Followers: 2)
Futures     Hybrid Journal   (Followers: 15)
Gender, Technology and Development     Hybrid Journal   (Followers: 14)
Green Materials     Hybrid Journal   (Followers: 3)
History and Technology: An International Journal     Hybrid Journal   (Followers: 11)
History of Science and Technology     Open Access   (Followers: 2)
Human Factors in Design     Open Access   (Followers: 8)
i+Diseño : Revista científico-académica internacional de Innovación, Investigación y Desarrollo en Diseño     Open Access  
IEEE Engineering in Medicine and Biology Magazine     Full-text available via subscription   (Followers: 6)
IEEE Open Journal of Nanotechnology     Open Access   (Followers: 1)
IET Collaborative Intelligent Manufacturing     Open Access   (Followers: 1)
IETE Journal of Research     Open Access   (Followers: 10)
IETE Technical Review     Open Access   (Followers: 9)
IFAC Journal of Systems and Control     Hybrid Journal   (Followers: 1)
Indian Journal of Radio & Space Physics (IJRSP)     Open Access   (Followers: 49)
Información Tecnológica     Open Access  
Innovation: Management, Policy & Practice     Hybrid Journal   (Followers: 16)
Innovation: The European Journal of Social Science Research     Hybrid Journal   (Followers: 10)
Innovations : Technology, Governance, Globalization     Hybrid Journal   (Followers: 10)
Integrating Materials and Manufacturing Innovation     Open Access   (Followers: 7)
International Journal for Quality Research     Open Access   (Followers: 4)
International Journal for the History of Engineering and Technology     Hybrid Journal   (Followers: 2)
International Journal of Additive and Subtractive Materials Manufacturing     Hybrid Journal   (Followers: 8)
International Journal of Advanced Design and Manufacturing Technology     Open Access   (Followers: 7)
International Journal of Automation and Logistics     Hybrid Journal   (Followers: 3)
International Journal of Bifurcation and Chaos     Hybrid Journal   (Followers: 4)
International Journal of Business and Systems Research     Hybrid Journal   (Followers: 1)
International Journal of Concrete Technology     Full-text available via subscription  
International Journal of Design     Open Access   (Followers: 24)
International Journal of Design Creativity and Innovation     Hybrid Journal   (Followers: 2)
International Journal of Digital Enterprise Technology     Hybrid Journal   (Followers: 1)
International Journal of Embedded Systems and Emerging Technologies     Full-text available via subscription   (Followers: 3)
International Journal of Energy Technology and Policy     Hybrid Journal   (Followers: 6)
International Journal of Engineering and Manufacturing     Open Access   (Followers: 3)
International Journal of Engineering Materials and Manufacture     Open Access   (Followers: 2)
International Journal of Experimental Design and Process Optimisation     Hybrid Journal   (Followers: 5)
International Journal of Information Acquisition     Hybrid Journal   (Followers: 1)
International Journal of Innovation and Technology Management     Hybrid Journal   (Followers: 10)
International Journal of Innovation Science     Hybrid Journal   (Followers: 9)
International Journal of Instructional Technology and Educational Studies     Open Access   (Followers: 1)
International Journal of Intelligent Transportation Systems Research     Hybrid Journal   (Followers: 13)
International Journal of Law and Information Technology     Hybrid Journal   (Followers: 7)
International Journal of Learning Technology     Hybrid Journal   (Followers: 8)
International Journal of Lightweight Materials and Manufacture     Open Access  
International Journal of Manufacturing Engineering     Open Access   (Followers: 4)
International Journal of Manufacturing, Materials, and Mechanical Engineering     Full-text available via subscription   (Followers: 17)
International journal of materials research     Full-text available via subscription   (Followers: 2)
International Journal of Mathematical Education in Science and Technology     Hybrid Journal   (Followers: 9)
International Journal of Nano and Biomaterials     Hybrid Journal   (Followers: 8)
International Journal of Physical Modelling in Geotechnics     Hybrid Journal   (Followers: 4)
International Journal of Planning and Scheduling     Hybrid Journal   (Followers: 2)
International Journal of Power and Energy Systems     Full-text available via subscription   (Followers: 1)
International Journal of Precision Engineering and Manufacturing-Green Technology     Hybrid Journal   (Followers: 2)
International Journal of Production Management and Engineering     Open Access   (Followers: 4)
International Journal of Quality and Innovation     Hybrid Journal   (Followers: 6)
International Journal of Quality Engineering and Technology     Hybrid Journal   (Followers: 4)
International Journal of Service and Computing Oriented Manufacturing     Hybrid Journal   (Followers: 2)
International Journal of Social and Humanistic Computing     Hybrid Journal  
International Journal of System of Systems Engineering     Hybrid Journal   (Followers: 3)
International Journal of Technoentrepreneurship     Hybrid Journal   (Followers: 1)
International Journal of Technological Learning, Innovation and Development     Hybrid Journal   (Followers: 6)
International Journal of Technology and Design Education     Hybrid Journal   (Followers: 11)
International Journal of Technology and Globalisation     Hybrid Journal   (Followers: 3)
International Journal of Technology Intelligence and Planning     Hybrid Journal  
International Journal of Technology Management     Hybrid Journal   (Followers: 4)
International Journal of Technology Marketing     Hybrid Journal   (Followers: 3)
International Journal of Technology Transfer and Commercialisation     Hybrid Journal   (Followers: 2)
International Journal of Technology, Policy and Management     Hybrid Journal   (Followers: 2)
International Journal of Telecommunications & Emerging Technologies     Full-text available via subscription   (Followers: 1)
International Journal of Vehicle Autonomous Systems     Hybrid Journal  
International Journal of Vehicle Design     Hybrid Journal   (Followers: 6)
International Wood Products Journal     Hybrid Journal   (Followers: 1)
Invention Disclosure     Open Access   (Followers: 1)
ITL - International Journal of Applied Linguistics     Full-text available via subscription   (Followers: 15)
Journal of Analytical Science & Technology     Open Access   (Followers: 4)
Journal of Applied Sciences     Open Access   (Followers: 4)
Journal of Control & Instrumentation     Full-text available via subscription   (Followers: 18)
Journal of Design Research     Hybrid Journal   (Followers: 15)
Journal of Energy, Mechanical, Material and Manufacturing Engineering     Open Access   (Followers: 3)
Journal of Engineered Fibers and Fabrics     Open Access  
Journal of Enterprise Transformation     Hybrid Journal   (Followers: 1)
Journal of Hazardous Materials Advances     Open Access  
Journal of High Technology Management Research     Hybrid Journal   (Followers: 2)
Journal of Industrial and Production Engineering     Hybrid Journal   (Followers: 4)
Journal of large-scale research facilities JLSRF     Open Access  
Journal of Manufacturing and Materials Processing     Open Access  
Journal of Materials Science Research     Open Access   (Followers: 7)
Journal of Micro-Bio Robotics     Hybrid Journal  
Journal of Micromanufacturing     Hybrid Journal  
Journal of Nanobiotechnology     Open Access   (Followers: 4)
Journal of Operations and Supply Chain Management     Open Access   (Followers: 6)
Journal of Production Research & Management     Full-text available via subscription   (Followers: 3)
Journal of Remanufacturing     Open Access   (Followers: 3)
Journal of Scientific and Industrial Research (JSIR)     Open Access   (Followers: 10)
Journal of Sensor Technology     Open Access   (Followers: 3)
Journal of Sensors and Sensor Systems     Open Access   (Followers: 12)
Journal of Sustainable Metallurgy     Hybrid Journal   (Followers: 3)
Journal of Technological Possibilism     Open Access  
Journal of Technology in Human Services     Hybrid Journal   (Followers: 3)
Journal of Technology Management for Growing Economies     Open Access   (Followers: 4)
Journal of Technology Management in China     Hybrid Journal   (Followers: 1)
Journal of the Chinese Institute of Industrial Engineers     Hybrid Journal  
Journal of The Royal Society Interface     Full-text available via subscription   (Followers: 9)
Journal of Urban Technology     Hybrid Journal   (Followers: 5)
Journal of Urban Technology and Sustainability     Open Access  
Jurnal Energi Dan Manufaktur     Open Access  
Lasers in Manufacturing and Materials Processing     Full-text available via subscription   (Followers: 2)
Leibniz Transactions on Embedded Systems     Open Access  
Lightweight Design     Hybrid Journal   (Followers: 4)
Management and Production Engineering Review     Open Access   (Followers: 1)
Manufacturing Letters     Full-text available via subscription   (Followers: 2)
Manufacturing Review     Open Access   (Followers: 1)
Manufacturing Science and Technology     Open Access   (Followers: 3)
Materials Circular Economy     Hybrid Journal  
Materials Science and Engineering: B     Hybrid Journal   (Followers: 22)
Materials testing. Materialprüfung     Full-text available via subscription   (Followers: 4)
MECCA Journal of Middle European Construction and Design of Cars     Open Access  
Mechanics of Soft Materials     Hybrid Journal  
Métodos y Materiales     Open Access   (Followers: 1)
Micro and Nanostructures     Full-text available via subscription   (Followers: 3)
Microgravity Science and Technology     Hybrid Journal   (Followers: 3)
Modern Electronic Materials     Open Access   (Followers: 1)
Multimodal Transportation     Full-text available via subscription   (Followers: 2)
Nano Select     Open Access   (Followers: 1)
NanoEthics     Hybrid Journal  
Nanomanufacturing and Metrology     Hybrid Journal   (Followers: 2)
Nature Biotechnology     Full-text available via subscription   (Followers: 542)
NDT & E International     Hybrid Journal   (Followers: 220)
New Techno-Humanities     Open Access   (Followers: 1)
Nonconventional Technologies Review     Open Access  
Perspectives on Global Development and Technology     Hybrid Journal  
Plastics, Rubber and Composites     Hybrid Journal   (Followers: 9)
Procedia CIRP     Open Access   (Followers: 2)
Production & Manufacturing Research     Open Access   (Followers: 2)
Progress in Additive Manufacturing     Hybrid Journal   (Followers: 8)
Progress in Rubber, Plastics and Recycling Technology     Hybrid Journal   (Followers: 1)
Reliability Engineering & System Safety     Hybrid Journal   (Followers: 19)
Remote Sensing Letters     Hybrid Journal   (Followers: 46)
Research Papers Faculty of Materials Science and Technology Slovak University of Technology     Open Access   (Followers: 3)
Revista de Ciências Exatas e Tecnologia     Open Access  
Revista Produção Online     Open Access  
Science and Technology of Advanced Materials     Open Access   (Followers: 7)
Science China Materials     Hybrid Journal   (Followers: 1)
Scientia Canadensis: Canadian Journal of the History of Science, Technology and Medicine / Scientia Canadensis : revue canadienne d'histoire des sciences, des techniques et de la médecine     Open Access   (Followers: 4)
Strategic Design Research Journal     Open Access   (Followers: 1)
Structural Health Monitoring     Hybrid Journal   (Followers: 6)
Superhero Science and Technology     Open Access   (Followers: 2)
Sustainability and Climate Change     Full-text available via subscription   (Followers: 6)

        1 2     

Similar Journals
Journal Cover
3D Printing and Additive Manufacturing
Journal Prestige (SJR): 0.808
Citation Impact (citeScore): 2
Number of Followers: 27  
 
  Full-text available via subscription Subscription journal
ISSN (Print) 2329-7662 - ISSN (Online) 2329-7670
Published by Mary Ann Liebert Homepage  [102 journals]
  • Additive Construction

    • Free pre-print version: Loading...

      Authors: Benjamin Dillenburger
      Pages: 83 - 83
      Abstract: 3D Printing and Additive Manufacturing, Volume 9, Issue 2, Page 83-83, April 2022.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-11T07:00:00Z
      DOI: 10.1089/3dp.2022.29018.bd
      Issue No: Vol. 9, No. 2 (2022)
       
  • Mechanical Properties, Microstructure, and Actuation Behavior of Wire Arc
           Additive Manufactured Nitinol: Titanium Bimetallic Structures

    • Free pre-print version: Loading...

      Authors: Shalini Singh, Elena Demidova, Natalia Resnina, Sergey Belyaev, I.A. Palani, C.P. Paul, Ajit Kumar, K.G. Prashanth
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-19T07:00:00Z
      DOI: 10.1089/3dp.2021.0324
       
  • A New Device for In Situ Dental Biofilm Collection Additively Manufactured
           by Direct Metal Laser Sintering and Vat Photopolymerization

    • Free pre-print version: Loading...

      Authors: Pernille Thestrup Rikvold, Karina Kambourakis Johnsen, Dirk Leonhardt, Andreas Møllebjerg, Signe Maria Nielsen, Lea Benedicte Skov Hansen, Rikke Louise Meyer, Sebastian Schlafer
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-12T07:00:00Z
      DOI: 10.1089/3dp.2022.0009
       
  • Bio-Physical Properties of Acetylated Chitosan/Poly(ɛ-Caprolactone)
           Composites for Three-Dimensional Printing Material Applications

    • Free pre-print version: Loading...

      Authors: Jin Ik Lim
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-12T07:00:00Z
      DOI: 10.1089/3dp.2022.0047
       
  • Direct Ink Writing of Carbon-Doped Polymeric Composite Ink: A Review on
           Its Requirements and Applications

    • Free pre-print version: Loading...

      Authors: Ratnesh Raj, Amit Rai Dixit
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-04T07:00:00Z
      DOI: 10.1089/3dp.2021.0209
       
  • Optimization of Surface Roughness and Density of Overhang Structures
           Fabricated by Laser Powder Bed Fusion

    • Free pre-print version: Loading...

      Authors: Hong-You Lin, Hong-Chuong Tran, Yu-Lung Lo, Trong-Nhan Le, Kuo-Chi Chiu, Yuan-Yao Hsu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-03T07:00:00Z
      DOI: 10.1089/3dp.2021.0180
       
  • Three-Dimensional Additive Manufacturing of Artificial Oil Reservoir Rock
           Core Plugs for Core Flooding Experimental Tests

    • Free pre-print version: Loading...

      Authors: Juan Antonio Cruz-Maya, Luis Carlos Martínez-Mendoza, Florencio Sánchez-Silva, José Alfredo Rosas-Flores, Janet Jan-Roblero
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-02T07:00:00Z
      DOI: 10.1089/3dp.2021.0149
       
  • Investigating the Effect of Design Parameters on the Mechanical
           Performance of Contact Wave Springs Designed for Additive Manufacturing

    • Free pre-print version: Loading...

      Authors: Muhammad Rizwan ul Haq, Aamer Nazir, Shang-Chih Lin, Jeng-Ywan Jeng
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-05-02T07:00:00Z
      DOI: 10.1089/3dp.2021.0313
       
  • Capacitance of Flexible Polymer/Graphene Microstructures with High
           Mechanical Strength

    • Free pre-print version: Loading...

      Authors: Vahid Nasirian, Amir Ehsan Niaraki-Asli, Saurabh S. Aykar, Mehrnoosh Taghavimehr, Reza Montazami, Nicole N. Hashemi
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-29T07:00:00Z
      DOI: 10.1089/3dp.2022.0026
       
  • Defining Soft Tissue: Bitmap Printing of Soft Tissue for Surgical Planning

    • Free pre-print version: Loading...

      Authors: Nicholas Jacobson, Erik Carerra, Lawrence Smith, Lorna Browne, Nicholas Stence, Alison Sheridan, Robert MacCurdy
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-28T07:00:00Z
      DOI: 10.1089/3dp.2021.0141
       
  • 3D Printing of Noncytotoxic High-Resolution Microchannels in Bisphenol-A
           Ethoxylate Dimethacrylate Tissue-Mimicking Materials

    • Free pre-print version: Loading...

      Authors: Roger Domingo-Roca, Lauren Gilmour, Oana Dobre, Stylianos Sarrigiannidis, Mairi E. Sandison, Richard O'Leary, Joseph C. Jackson-Camargo, Helen E. Mulvana
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-28T07:00:00Z
      DOI: 10.1089/3dp.2021.0235
       
  • Studying the Effect of Short Carbon Fiber on Fused Filament Fabrication
           Parts Roughness via Machine Learning

    • Free pre-print version: Loading...

      Authors: Alberto García-Collado, Pablo Eduardo Romero-Carrillo, Rubén Dorado-Vicente, Munish Kumar Gupta
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-28T07:00:00Z
      DOI: 10.1089/3dp.2021.0304
       
  • Finding Ideal Parameters for Recycled Material Fused Particle
           Fabrication-Based 3D Printing Using an Open Source Software Implementation
           of Particle Swarm Optimization

    • Free pre-print version: Loading...

      Authors: Shane Oberloier, Nicholas G. Whisman, Joshua M. Pearce
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-28T07:00:00Z
      DOI: 10.1089/3dp.2022.0012
       
  • Biobased Resin for Sustainable Stereolithography: 3D Printed Vegetable Oil
           Acrylate Reinforced with Ultra-Low Content of Nanocellulose for Fossil
           Resin Substitution

    • Free pre-print version: Loading...

      Authors: Anda Barkane, Maksims Jurinovs, Sabine Briede, Oskars Platnieks, Pavels Onufrijevs, Zane Zelca, Sergejs Gaidukovs
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-27T07:00:00Z
      DOI: 10.1089/3dp.2021.0294
       
  • Interfacial Weakness Criterion by Indentation in 3D Printed Concrete

    • Free pre-print version: Loading...

      Authors: Maria Taleb, David Bulteel, Damien Betrancourt, Francine Roudet, Sébastien Rémond, Didier Chicot
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-08T07:00:00Z
      DOI: 10.1089/3dp.2021.0128
       
  • Fluid Thermodynamic Simulation of Ti-6Al-4V Alloy in Laser Wire Deposition

    • Free pre-print version: Loading...

      Authors: Xiang Wang, Lin-Jie Zhang, Jie Ning, Suck-Joo Na
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-08T07:00:00Z
      DOI: 10.1089/3dp.2021.0159
       
  • Evaluation of the Morphological Effects of Hydroxyapatite Nanoparticles on
           the Rheological Properties and Printability of
           Hydroxyapatite/Polycaprolactone Nanocomposite Inks and Final Scaffold
           Features

    • Free pre-print version: Loading...

      Authors: Mansure Kazemi, Motahareh Mirzadeh, Hasti Esmaeili, Elahe Kazemi, Mohammad Rafienia, Seyed Ali Poursamar
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-01T07:00:00Z
      DOI: 10.1089/3dp.2021.0292
       
  • Powder Bed Fusion Versus Material Extrusion: A Comparative Case Study on
           Polyether-Ether-Ketone Cranial Implants

    • Free pre-print version: Loading...

      Authors: Yaan Liu, Nan Yi, Richard Davies, Paul McCutchion, Oana Ghita
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-04-01T07:00:00Z
      DOI: 10.1089/3dp.2021.0300
       
  • Laser Powder Bed Fusion of Sm-Fe-N Bonded Magnets Employing Flake Powders

    • Free pre-print version: Loading...

      Authors: Melissa Röhrig, Rafael Gitti Tortoretto Fim, Rubens Nunes de Faria, Cristiani Campos Plá Cid, Carlos Henrique Ahrens, Paulo Wendhausen
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-29T07:00:00Z
      DOI: 10.1089/3dp.2021.0228
       
  • A Micro-Scale Non-Linear Finite Element Model to Optimize the Mechanical
           Behavior of Bioprinted Constructs

    • Free pre-print version: Loading...

      Authors: Abhinaba Banerjee, Sudipto Datta, Ankita Das, Amit Roy Chowdhury, Pallab Datta
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-29T07:00:00Z
      DOI: 10.1089/3dp.2021.0238
       
  • Mechanical Performance of Lightweight-Designed Honeycomb Structures
           Fabricated Using Multijet Fusion Additive Manufacturing Technology

    • Free pre-print version: Loading...

      Authors: Aamer Nazir, Ahmad Bin Arshad, Shang-Chih Lin, Jeng-Ywan Jeng
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-23T07:00:00Z
      DOI: 10.1089/3dp.2021.0004
       
  • Generative Design of Structured Materials for Controlled Frequency
           Responses

    • Free pre-print version: Loading...

      Authors: Wuxin Yang, Loulin Huang, Sarat Singamneni
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0241
       
  • The Application of a Multi-Material Flexible Chain Mail for the Design of
           an Artificial Spinal Disc to Reproduce Natural Nonlinear and Anisotropic
           Rotational Behavior

    • Free pre-print version: Loading...

      Authors: Zhiyang Yu, Kristina Shea, Tino Stankovic
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0299
       
  • Multiscale Porous Poly (Ether-Ether-Ketone) Structures Manufactured by
           Powder Bed Fusion Process

    • Free pre-print version: Loading...

      Authors: Yaan Liu, Richard Davies, Nan Yi, Paul McCutchion, Binling Chen, Oana Ghita
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0317
       
  • The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene
           Terephthalate Glycol Multi-Material Structures Manufactured by Material
           Extrusion

    • Free pre-print version: Loading...

      Authors: Emre Demir, İnal Kaan Duygun, Ayşe Bedeloğlu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-03-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0321
       
  • Regenerative Topology Optimization of Fine Lattice Structures

    • Free pre-print version: Loading...

      Authors: Sofia Di Toro Wyetzner, Salvy Cavicchio, Andrew Moshova, Hod Lipson
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-28T08:00:00Z
      DOI: 10.1089/3dp.2021.0086
       
  • Fast and Accurate Defects Detection for Additive Manufactured Parts by
           Multispectrum and Machine Learning

    • Free pre-print version: Loading...

      Authors: Lingbao Kong, Xing Peng, Yao Chen
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-28T08:00:00Z
      DOI: 10.1089/3dp.2021.0191
       
  • Centrifugation-Assisted Three-Dimensional Printing of Devices Embedded
           with Fully Enclosed Microchannels

    • Free pre-print version: Loading...

      Authors: Chia-Heng Chu, Enerelt Burentugs, Dohwan Lee, Jacob M. Owens, Ruxiu Liu, Albert B. Frazier, A. Fatih Sarioglu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-14T08:00:00Z
      DOI: 10.1089/3dp.2021.0133
       
  • Modeling and Simulation of Additively Manufactured Cylindrical Component
           Using Combined Thermomechanical and Inherent Strain Method with
           Nelder–Mead Optimization

    • Free pre-print version: Loading...

      Authors: Thoufeili Taufek, Yupiter H.P. Manurung, Mohd Shahriman Adenan, Syidatul Akma, Hui Leng Choo, Borhen Louhichi, Martin Bednardz, Izhar Aziz
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-14T08:00:00Z
      DOI: 10.1089/3dp.2021.0197
       
  • Fabricating Wood-Like Textures on Multicurved 3D Printed Architectural
           Elements

    • Free pre-print version: Loading...

      Authors: John Mai, Eduardo De Oliveira Barata, Sandra Karina Löschke, Gwénaëlle Proust
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-11T08:00:00Z
      DOI: 10.1089/3dp.2021.0139
       
  • Study of Low-Pressure Cold Spray Additive Manufacturing: Investigation of
           Kinematic Spray Parameters on Deposition and Properties

    • Free pre-print version: Loading...

      Authors: Wenbo Li, Hongjian Wu, Christophe Verdy, Sophie Costil, Hanlin Liao, Sihao Deng
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-11T08:00:00Z
      DOI: 10.1089/3dp.2021.0260
       
  • Performance Analysis of Conventional and DMLS Copper Electrode During EDM
           Process in AA4032-TiC Composite

    • Free pre-print version: Loading...

      Authors: Senthilkumar Thangarajan Sivasankaran, Senthil Kumar Shanmugakani, Rathinavel Subbiah
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-03T08:00:00Z
      DOI: 10.1089/3dp.2021.0030
       
  • Mechanical Performance of Three-Dimensional Printed Lattice Structures:
           Assembled Versus Direct Print

    • Free pre-print version: Loading...

      Authors: Adeeb Alam, Keith Berube, Masoud Rais-Rohani, Bashir Khoda
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-03T08:00:00Z
      DOI: 10.1089/3dp.2021.0207
       
  • Cross Section Contour Extraction Algorithm of Additive Manufacturing
           Micromixers

    • Free pre-print version: Loading...

      Authors: Wenjie Niu, Mengxue Yang, Yu Liu, Yu Gong, Ying Xu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-02-03T08:00:00Z
      DOI: 10.1089/3dp.2021.0245
       
  • The Quantitative Impact of Using 3D Printed Anatomical Models for Surgical
           Planning Optimization: Literature Review

    • Free pre-print version: Loading...

      Authors: María Clara Betancourt, Carlos Arau´jo, Sara Marín, Wanda Buriticá
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-31T08:00:00Z
      DOI: 10.1089/3dp.2021.0188
       
  • Selective Laser Melting of Commercially Pure Molybdenum by Laser
           Rescanning

    • Free pre-print version: Loading...

      Authors: Navid Alinejadian, Pei Wang, Lauri Kollo, Konda Gokuldoss Prashanth
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-27T08:00:00Z
      DOI: 10.1089/3dp.2021.0265
       
  • Fabrication of Multi-Channel Nerve Guidance Conduits Containing Schwann
           Cells Based on Multi-Material 3D Bioprinting

    • Free pre-print version: Loading...

      Authors: Liming Zhang, Hui Zhang, Heran Wang, Kai Guo, Huixuan Zhu, Song Li, Feiyang Gao, Shijie Li, Zhenda Yang, Xin Liu, Xiongfei Zheng
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-25T08:00:00Z
      DOI: 10.1089/3dp.2021.0203
       
  • Improvement of Processability Characteristics of Porcelain-Based
           Formulations Toward the Utilization of 3D Printing Technology

    • Free pre-print version: Loading...

      Authors: Liliana Sofia Oliveira Pires, Daniel Gil Afonso, Maria Helena Figueira Vaz Fernandes, José Martinho Marques de Oliveira
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-21T08:00:00Z
      DOI: 10.1089/3dp.2021.0102
       
  • Recovery of 17β-Estradiol Using 3D Printed Polyamide-12 Scavengers

    • Free pre-print version: Loading...

      Authors: Janne Frimodig, Aino Autio, Elmeri Lahtinen, Matti Haukka
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-13T08:00:00Z
      DOI: 10.1089/3dp.2021.0063
       
  • Failure Behavior of Laser Metal Deposited Additive Manufacturing
           Ti-6Al-4V: Effects of Stress State and Initial Defects

    • Free pre-print version: Loading...

      Authors: Chang Peng, Peng-Hui Li, Wei-Guo Guo, Rui-Feng Wang, Yan-Ping Li
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-13T08:00:00Z
      DOI: 10.1089/3dp.2021.0101
       
  • A Review of In Situ Defect Detection and Monitoring Technologies in
           Selective Laser Melting

    • Free pre-print version: Loading...

      Authors: Xing Peng, Lingbao Kong, Huijun An, Guangxi Dong
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-13T08:00:00Z
      DOI: 10.1089/3dp.2021.0114
       
  • Assessing Leachable Cytotoxicity of 3D-Printed Polymers and Facile
           Detoxification Methods

    • Free pre-print version: Loading...

      Authors: Venkatakrishnan Rengarajan, Angela Clyde, Jefferson Pontsler, Jonathan Valiente, Adreann Peel, Yu Huang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-13T08:00:00Z
      DOI: 10.1089/3dp.2021.0216
       
  • Rapid Volumetric Additive Manufacturing in Solid State: A Demonstration to
           Produce Water-Content-Dependent Cooling/Heating/Water-Responsive Shape
           Memory Hydrogels

    • Free pre-print version: Loading...

      Authors: Abhijit Vijay Salvekar, Faqrul Hasif Bin Abdul Nasir, Ya Hui Chen, Sharanya Maiti, Vivek Damodar Ranjan, Hong Mei Chen, Han Wang, Wei Min Huang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-12T08:00:00Z
      DOI: 10.1089/3dp.2021.0279
       
  • 3D Printable Thermoplastic Polyurethane Energy Efficient Passive Foot

    • Free pre-print version: Loading...

      Authors: Muhammad Hassaan Ahmed, Asharib Jamshid, Usman Amjad, Aashir Azhar, Muhammad Zawar ul Hassan, Mohsin Islam Tiwana, Waqar Shahid Qureshi, Eisa Alanazi
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-05T08:00:00Z
      DOI: 10.1089/3dp.2021.0022
       
  • Heat Treatment Design for IN718 by Laser Metal Deposition with High
           Deposition Rates: Modeling, Simulation, and Experiments

    • Free pre-print version: Loading...

      Authors: Chongliang Zhong, Venkatesh Pandian Narayana Samy, Norbert Pirch, Andres Gasser, Gandham Phanikumar, Johannes Henrich Schleifenbaum
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-05T08:00:00Z
      DOI: 10.1089/3dp.2021.0115
       
  • Influence of Auxiliary Process on Microstructure and Mechanical Properties
           of Wire Arc Additive Manufacturing of Thick Wall Depositions

    • Free pre-print version: Loading...

      Authors: Wei Wu, Wei Xu, Jiaxiang Xue, Ping Yao
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-05T08:00:00Z
      DOI: 10.1089/3dp.2021.0142
       
  • Machine Learning-Based Operational State Recognition and Compressive
           Property Prediction in Fused Filament Fabrication

    • Free pre-print version: Loading...

      Authors: Yongxiang Li, Guoning Xu, Wei Zhao, Tongcai Wang, Haochen Li, Yifei Liu, Gong Wang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-05T08:00:00Z
      DOI: 10.1089/3dp.2021.0185
       
  • Anomaly Detection in Fused Filament Fabrication Using Machine Learning

    • Free pre-print version: Loading...

      Authors: Guo Dong Goh, Nur Muizzu Bin Hamzah, Wai Yee Yeong
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2022-01-05T08:00:00Z
      DOI: 10.1089/3dp.2021.0231
       
  • Is COVID-19 the “Catalyst” to Incorporate 3D Printing Technology into
           the Manufacturing Industry'

    • Free pre-print version: Loading...

      Authors: Maria Mavri, Vangelis Mennis
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-30T08:00:00Z
      DOI: 10.1089/3dp.2021.0050
       
  • Effective Mechanical Properties of AlSi7Mg Additively Manufactured Cubic
           Lattice Structures

    • Free pre-print version: Loading...

      Authors: Sara Mantovani, Mauro Giacalone, Andrea Merulla, Elena Bassoli, Silvio Defanti
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-30T08:00:00Z
      DOI: 10.1089/3dp.2021.0176
       
  • 3D Printing of Copper Using Water-Based Colloids and Reductive Sintering

    • Free pre-print version: Loading...

      Authors: Lorenzo Airoldi, Riccardo Brucculeri, Primo Baldini, Francesco Pini, Barbara Vigani, Silvia Rossi, Ferdinando Auricchio, Umberto Anselmi-Tamburini, Simone Morganti
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-30T08:00:00Z
      DOI: 10.1089/3dp.2021.0248
       
  • Remodeling of Architected Mesenchymal Microtissues Generated on Mechanical
           Metamaterials

    • Free pre-print version: Loading...

      Authors: Chenyan Wang, Zacharias Vangelatos, Tackla Winston, Shiyang Sun, Costas P. Grigoropoulos, Zhen Ma
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-29T08:00:00Z
      DOI: 10.1089/3dp.2021.0091
       
  • Ceramic 3D Printing via Dye-Sensitized Photopolymerization Under Green LED

    • Free pre-print version: Loading...

      Authors: Gang Wang, Chuanzhe Ma, Tianyu Hu, Tao Wang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-28T08:00:00Z
      DOI: 10.1089/3dp.2021.0204
       
  • Optimizing Process Parameters of Direct Ink Writing for Dimensional
           Accuracy of Printed Layers

    • Free pre-print version: Loading...

      Authors: Yongqiang Tu, Javier A. Arrieta-Escobar, Alaa Hassan, Uzair Khaleeq uz Zaman, Ali Siadat, Gongliu Yang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-28T08:00:00Z
      DOI: 10.1089/3dp.2021.0208
       
  • Microstructures and Electrochemical Dissolution Characteristics of
           Additive-Manufactured Stainless Steel 304 on Different Sections at Low
           Current Density

    • Free pre-print version: Loading...

      Authors: Chenhao Zhao, Ningsong Qu, Xiaochuan Tang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-28T08:00:00Z
      DOI: 10.1089/3dp.2021.0214
       
  • Selective Laser Melting of TiC-Fe via Laser Pulse Shaping: Microstructure
           and Mechanical Properties

    • Free pre-print version: Loading...

      Authors: Himanshu Singh Maurya, Lauri Kollo, Marek Tarraste, Kristjan Juhani, Fjodor Sergejev, Konda Gokuldoss Prashanth
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-28T08:00:00Z
      DOI: 10.1089/3dp.2021.0221
       
  • Efficiency Research of Conformal Channel Geometries Produced by Additive
           Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive
           Industry

    • Free pre-print version: Loading...

      Authors: Cemal İrfan Çalışkan, Gökhan Özer, Ebubekir Koç, Umur Sezer Sarıtaş, Coşkun Fırat Yıldız, Övgü Yağız Çiçek
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-24T08:00:00Z
      DOI: 10.1089/3dp.2021.0062
       
  • Printing Ready Topology Optimization for Material Extrusion Polymer
           Additive Manufacturing

    • Free pre-print version: Loading...

      Authors: Jingjing Yan, Zhiling Yuan, Qiang Liu, Guoliang Liu, Lei Li
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-24T08:00:00Z
      DOI: 10.1089/3dp.2021.0189
       
  • A Novel Approach of Customized Pelvic Implant Design Based on Symmetrical
           Analysis and 3D Printing

    • Free pre-print version: Loading...

      Authors: Yuan Chai, Xiao-Bo Chen, Jesse A. Estoque, Nick Birbilis, Qinghua Qin, Tomas Ward, Paul N. Smith, Rachel W. Li
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-23T08:00:00Z
      DOI: 10.1089/3dp.2021.0121
       
  • The Influence of Interface Design and External Frame on the Energy
           Absorption Performance of the Semi-Auxetic Structure

    • Free pre-print version: Loading...

      Authors: Xuexia Zhang, Pengfei Yan, Biao Yan
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-23T08:00:00Z
      DOI: 10.1089/3dp.2021.0134
       
  • Additive Manufacturing and Composite Materials for Marine Energy: Case of
           Tidal Turbine

    • Free pre-print version: Loading...

      Authors: Marwane Rouway, Mostapha Tarfaoui, Nabil Chakhchaoui, Lhaj El Hachemi Omari, Fouzia Fraija, Omar Cherkaoui
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-20T08:00:00Z
      DOI: 10.1089/3dp.2021.0194
       
  • Design and Validation of Additively Manufactured Injection Molds

    • Free pre-print version: Loading...

      Authors: Yannic Lay, Robin Roj, Martin Bonnet, Ralf Theiß, Peter Dültgen
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-17T08:00:00Z
      DOI: 10.1089/3dp.2021.0132
       
  • Multipart Build Effects on Temperature and Residual Stress by Laser Beam
           Powder Bed Fusion Additive Manufacturing

    • Free pre-print version: Loading...

      Authors: Wenyou Zhang, Mingming Tong, Noel M. Harrison
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-17T08:00:00Z
      DOI: 10.1089/3dp.2021.0143
       
  • Closed-Loop Filament Feed Control in Fused Filament Fabrication

    • Free pre-print version: Loading...

      Authors: Michele Moretti, Arianna Rossi
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-12-06T08:00:00Z
      DOI: 10.1089/3dp.2021.0236
       
  • Investigation of In Situ Vibration During Wire and Arc Additive
           Manufacturing

    • Free pre-print version: Loading...

      Authors: Chi Ma, Changlong Li, Yuhao Yan, Yonghong Liu, Xinlei Wu, Dege Li, Hui Jin, Fan Zhang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-26T08:00:00Z
      DOI: 10.1089/3dp.2021.0053
       
  • Effect of High Laser Energy Density on Selective Laser Melted 316L
           Stainless Steel: Analysis on Metallurgical and Mechanical Properties and
           Comparison with Wrought 316L Stainless Steel

    • Free pre-print version: Loading...

      Authors: Pradeep Kumar Shanmuganathan, Dinesh Babu Purushothaman, Marimuthu Ponnusamy
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-26T08:00:00Z
      DOI: 10.1089/3dp.2021.0061
       
  • Bulk-Material Bond Strength Exists in Extrusion Additive Manufacturing for
           a Wide Range of Temperatures, Speeds, and Layer Times

    • Free pre-print version: Loading...

      Authors: Amirpasha Moetazedian, James Allum, Andrew Gleadall, Vadim V. Silberschmidt
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-26T08:00:00Z
      DOI: 10.1089/3dp.2021.0112
       
  • Finite Element Analysis and Computational Fluid Dynamics Verification of
           Molten Pool Characteristics During Selective Laser Melting of Ti-6Al-4V
           Plates

    • Free pre-print version: Loading...

      Authors: Lv Du, Wu-Gui Jiang, Gao-Gui Xu, Qing-Hua Qin, Duo-Sheng Li
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-26T08:00:00Z
      DOI: 10.1089/3dp.2021.0161
       
  • Effect of Stabilizers and Thermoplastic Polyurethane on the Properties of
           Three-Dimensional Printed Photochromic Wood Flour/Polylactic Acid
           Composites

    • Free pre-print version: Loading...

      Authors: Haiying Yang, Dong Wang, Hongjie Bi, Zechun Ren, Min Xu, Zhenhua Huang, Liping Cai
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-26T08:00:00Z
      DOI: 10.1089/3dp.2021.0170
       
  • Three-Dimensional Printed Subsurface Defect Detection by Active
           Thermography Data-Processing Algorithm

    • Free pre-print version: Loading...

      Authors: Ézio Carvalho de Santana, Wellington Francisco da Silva, Marcella Grosso Lima, Gabriela Ribeiro Pereira, Douglas Bressan Riffel
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-26T08:00:00Z
      DOI: 10.1089/3dp.2021.0172
       
  • Effect of Particle Size and Shape on Wall Slip of Highly Filled Powder
           Feedstocks for Material Extrusion and Powder Injection Molding

    • Free pre-print version: Loading...

      Authors: Daniel Sanetrnik, Berenika Hausnerova, Martin Novak, Bhimasena Nagaraj Mukund
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-25T08:00:00Z
      DOI: 10.1089/3dp.2021.0157
       
  • Investigation and Improvement of Pushing Dislocation in Ceramsite Sand
           Three-Dimensional Printing

    • Free pre-print version: Loading...

      Authors: Guili Gao, Zhimin Du, Weikun Zhang, Qingyi Liu, Yanqing Su, Yunqiang Ni, Dequan Shi
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-05T07:00:00Z
      DOI: 10.1089/3dp.2021.0088
       
  • Selective Laser Sintering of Polydimethylsiloxane Composites

    • Free pre-print version: Loading...

      Authors: Jinzhi Wang, Shaojie Sun, Xue Li, Guoxia Fei, Zhanhua Wang, Hesheng Xia
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-05T07:00:00Z
      DOI: 10.1089/3dp.2021.0105
       
  • Selective Laser Sintering Parameter Optimization of Prosopis
           Chilensis/Polyethersulfone Composite Fabricated by AFS-360 SLS

    • Free pre-print version: Loading...

      Authors: Aboubaker I.B. Idriss, Jian Li, Yanling Guo, Tong Shuhui, Yangwei Wang, Elkhawad A. Elfaki, Gafer A. Ahmed
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-11-05T07:00:00Z
      DOI: 10.1089/3dp.2021.0118
       
  • Advances in Online Detection Technology for Laser Additive Manufacturing:
           A Review

    • Free pre-print version: Loading...

      Authors: Rui Li Zu, Dong Liang Wu, Jiang Fan Zhou, Zhan Wei Liu, Hui Min Xie, Sheng Liu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0049
       
  • Effect of Process Parameters and Postprocessing on Mechanical Properties
           of Additive Manufacturing Polylactic Acid Obtained by Fused Deposition
           Modeling

    • Free pre-print version: Loading...

      Authors: Fernando Rivera-López, María Hernández-Molina, Alejandro del Medico Bravo, Maria Milagros Laz Pavón
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0052
       
  • Three-Dimensional Rock Core-Like Microstructure Fabricated by Additive
           Manufacturing for Petroleum Engineering

    • Free pre-print version: Loading...

      Authors: Yi Mo, Xiaocong Chang, Zhongwei Yu, Daxing Sun, Dekai Zhou, Longqiu Li
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0135
       
  • Microstructure and Biomechanical Properties in Selective Laser Melting of
           Porous Metal Implants

    • Free pre-print version: Loading...

      Authors: Yabao Hu, Hanning Chen, Xiaodan Liang, Mo Jia, Jianbo Lei
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-22T07:00:00Z
      DOI: 10.1089/3dp.2021.0150
       
  • The Facile Three-Dimensional Printing of the Composite of Copper Nanosized
           Powder and Micron Powder with Enhanced Properties

    • Free pre-print version: Loading...

      Authors: Youzhi Zhou, Huijun He, Jingjie Xu, Minghui Liang, Limin Wang, Ligen Wang, Xu Pan, Qiang Hu, Jingguo Zhang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-11T07:00:00Z
      DOI: 10.1089/3dp.2021.0122
       
  • Printing Parameters of Fused Filament Fabrication Affect Key Properties of
           Four-Dimensional Printed Shape-Memory Polymers

    • Free pre-print version: Loading...

      Authors: Katy Pieri, Bailey M. Felix, Teng Zhang, Pranav Soman, James H. Henderson
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-08T07:00:00Z
      DOI: 10.1089/3dp.2021.0072
       
  • Immersion Ultrasonic Testing of Artificially Induced Defects in Fused
           Filament Fabricated Steel 316L

    • Free pre-print version: Loading...

      Authors: Solomon O. Obadimu, John McLaughlin, Kyriakos I. Kourousis
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-08T07:00:00Z
      DOI: 10.1089/3dp.2021.0095
       
  • A Feature-Specific Local Cooling System to Control Tensile Strength and
           Dimensional Accuracy in Fused Filament Fabrication

    • Free pre-print version: Loading...

      Authors: Kilian Maria Arthur Mueller, Sebastian Tobias Pammer, Stefan Leonhardt, Petra Mela
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-08T07:00:00Z
      DOI: 10.1089/3dp.2021.0098
       
  • Design, Preparation, and Mechanical Property Study of Polylactic
           Acid/Ca2BO3Cl: Eu2+, Dy3+ Composite Material for 3D Printing

    • Free pre-print version: Loading...

      Authors: Chaoqun He, Wei Zeng, Rui Kong, Jingling Gong, Wenjing Ma, Qi Tie, Miao Zhang, Quanmei Zhang, Xin Yi, Jie Guan
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-08T07:00:00Z
      DOI: 10.1089/3dp.2021.0162
       
  • Nonplanar 3D Printing of Bifurcating Forms

    • Free pre-print version: Loading...

      Authors: Ioanna Mitropoulou, Mathias Bernhard, Benjamin Dillenburger
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-05T07:00:00Z
      DOI: 10.1089/3dp.2021.0023
       
  • Teaching Designing for Additive Manufacturing: Formulating Educational
           Interventions That Encourage Design Creativity

    • Free pre-print version: Loading...

      Authors: Rohan Prabhu, Timothy W. Simpson, Scarlett R. Miller, Stephanie L. Cutler, Nicholas A. Meisel
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-10-04T07:00:00Z
      DOI: 10.1089/3dp.2021.0087
       
  • Design and Evaluation of Asphalt Concrete Incorporating Plastic Aggregates
           Fabricated Using 3D Printing Technology

    • Free pre-print version: Loading...

      Authors: Aamer Nazir, Min-Chih Liao, Yan-Wei Zhu, Usman Nazir
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-22T07:00:00Z
      DOI: 10.1089/3dp.2020.0347
       
  • Melt Electrospinning Writing of Mesh Implants for Pelvic Organ Prolapse
           Repair

    • Free pre-print version: Loading...

      Authors: Miguel Nuno Barbosa da Cunha, Rita Rynkevic, Maria Elisabete Teixeira da Silva, André Filipe Moreira da Silva Brandão, Jorge Lino Alves, António Augusto Fernandes
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-20T07:00:00Z
      DOI: 10.1089/3dp.2021.0010
       
  • A 5 + 1-Axis 3D Printing Platform for Producing Customized
           Intestinal Fistula Stents

    • Free pre-print version: Loading...

      Authors: Qingxi Hu, Jian Cui, Haiguang Zhang, Suihong Liu, Murugan Ramalingam
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-20T07:00:00Z
      DOI: 10.1089/3dp.2021.0044
       
  • Optimization of Selective Laser Sintering Process Parameters Based on PA12
           Powders for Bone Tissue Scaffolds

    • Free pre-print version: Loading...

      Authors: Ran Yan, Changjiang Xie, Ze Zhao, Junchao Li
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-17T07:00:00Z
      DOI: 10.1089/3dp.2021.0111
       
  • Simulating and Predicting the Part Warping in Fused Deposition Modeling by
           Thermal–Structural Coupling Analysis

    • Free pre-print version: Loading...

      Authors: Guoguang Chen, Dashuang Wang, Weijian Hua, Weibin Wu, Wuyi Zhou, Yifei Jin, Wenxu Zheng
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-14T07:00:00Z
      DOI: 10.1089/3dp.2021.0119
       
  • Continuous Comprehensive Monitoring of Melt Pool Morphology Under
           Realistic Printing Scenarios with Laser Powder Bed Fusion

    • Free pre-print version: Loading...

      Authors: Chaitanya Krishna Prasad Vallabh, Xiayun Zhao
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-07T07:00:00Z
      DOI: 10.1089/3dp.2021.0060
       
  • Impact Printing

    • Free pre-print version: Loading...

      Authors: Coralie Ming, Ammar Mirjan, Jesús Medina Ibáñez, Fabio Gramazio, Matthias Kohler
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-06T07:00:00Z
      DOI: 10.1089/3dp.2021.0068
       
  • Robotic Plaster Spraying: Crafting Surfaces with Adaptive Thin-Layer
           Printing

    • Free pre-print version: Loading...

      Authors: Selen Ercan Jenny, Ena Lloret-Fritschi, David Jenny, Eliott Sounigo, Ping-Hsun Tsai, Fabio Gramazio, Matthias Kohler
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-27T07:00:00Z
      DOI: 10.1089/3dp.2020.0355
       
  • Binder Jetting of Custom Silicone Powder for Direct Three-Dimensional
           Printing of Maxillofacial Prostheses

    • Free pre-print version: Loading...

      Authors: Yun Chang Lee, Jisi Zheng, Jonathan Kuo, Giovanny F. Acosta-Vélez, Chase S. Linsley, Benjamin M. Wu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-24T07:00:00Z
      DOI: 10.1089/3dp.2021.0019
       
  • Additive Timber Manufacturing: A Novel, Wood-Based Filament and Its
           Additive Robotic Fabrication Techniques for Large-Scale,
           Material-Efficient Construction

    • Free pre-print version: Loading...

      Authors: Philipp Eversmann, Julian Ochs, Jannis Heise, Zuardin Akbar, Stefan Böhm
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-13T07:00:00Z
      DOI: 10.1089/3dp.2020.0356
       
  • Additive Manufacturing of Large Coreless Filament Wound Composite Elements
           for Building Construction

    • Free pre-print version: Loading...

      Authors: Serban Bodea, Pascal Mindermann, Götz T. Gresser, Achim Menges
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-11T07:00:00Z
      DOI: 10.1089/3dp.2020.0346
       
  • Benefits of 3D Printed and Customized Anatomical Footwear Insoles for
           Plantar Pressure Distribution

    • Free pre-print version: Loading...

      Authors: Sona Jandova, Radomir Mendricky
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-11T07:00:00Z
      DOI: 10.1089/3dp.2021.0002
       
  • Two-Dimensional Laser Melting of Lunar Regolith Simulant Using the
           MOONRISE Payload on a Mobile Manipulator

    • Free pre-print version: Loading...

      Authors: Stefan Linke, Anna Voß, Mathias Ernst, Patrick A. Taschner, Julian Baasch, Simon Stapperfend, Niklas Gerdes, Jürgen Koch, Peter Weßels, Jörg Neumann, Ludger Overmeyer, Enrico Stoll
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-02T07:00:00Z
      DOI: 10.1089/3dp.2020.0323
       
  • Additively Manufactured NdFeB Polyphenylene Sulfide Halbach Magnets to
           Generate Variable Magnetic Fields for Neutron Reflectometry

    • Free pre-print version: Loading...

      Authors: Tej Nath Lamichhane, Timothy R. Charlton, Brian Andrews, Devanshi Malaviya, Arjun K. Pathak, Haile Ambaye, Mathieu Doucet, Valeria Lauter, John Katsaras, Brian K. Post, Mariappan Parans Paranthaman
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-02T07:00:00Z
      DOI: 10.1089/3dp.2020.0340
       
  • Bibliometric Analysis-Based Review of Fused Deposition Modeling 3D
           Printing Method (1994–2020)

    • Free pre-print version: Loading...

      Authors: Rishi Parvanda, Prateek Kala, Varun Sharma
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-02T07:00:00Z
      DOI: 10.1089/3dp.2021.0046
       
  • Effects of Different Orientation Angle, Size, Surface Roughness, and Heat
           Curing on Mechanical Behavior of 3D Printed Cement Mortar With/Without
           Glass Fiber in Powder-Based 3DP

    • Free pre-print version: Loading...

      Authors: Pshtiwan Shakor, Shami Nejadi, Gavin Paul, Nadarajah Gowripalan
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-02T07:00:00Z
      DOI: 10.1089/3dp.2021.0067
       
  • Wear and Thermal Behavior of TiAlN Thin Films onto Ti6Al4V Alloy
           Manufactured by Selective Laser Melting Method

    • Free pre-print version: Loading...

      Authors: Gürkan Kaya, Tevfik Oğuzhan Ergüder, İlyas Hacısalihoğlu, Emre Mandev, Eyüphan Manay, Fatih Yıldız
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-08-02T07:00:00Z
      DOI: 10.1089/3dp.2021.0081
       
  • Rotation-Assisted Separation Model of Constrained-Surface
           Stereolithography

    • Free pre-print version: Loading...

      Authors: Min Hu, Haobo Cheng, Yunpeng Feng
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-28T07:00:00Z
      DOI: 10.1089/3dp.2021.0001
       
  • Development of 3D Printed Electrospun Scaffolds for the Fabrication of
           Porous Scaffolds for Vascular Applications

    • Free pre-print version: Loading...

      Authors: Jahnvi Bansal, Katelyn Neuman, Vaughn K. Greene, David A. Rubenstein
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-27T07:00:00Z
      DOI: 10.1089/3dp.2020.0337
       
  • Improved Sintering Quality and Mechanical Properties of Peanut Husk
           Powder/Polyether Sulfone Composite for Selective Laser Sintering

    • Free pre-print version: Loading...

      Authors: Aboubaker I.B. Idriss, Jian Li, Yanling Guo, Yangwei Wang, Elkhawad A. Elfaki, Elhaj A.I. Ahmed
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-26T07:00:00Z
      DOI: 10.1089/3dp.2021.0036
       
  • Electro-Osmotic Gripper Characterization for Layered Assembly

    • Free pre-print version: Loading...

      Authors: Cheryl Perich, Robert MacCurdy, Ashley Macner, Joni Mici, Paul Steen, Hod Lipson
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2020.0224
       
  • Toward Stimuli-Responsive Soft Robots with 3D Printed Self-Healing Konjac
           Glucomannan Gels

    • Free pre-print version: Loading...

      Authors: Krishna Manaswi Digumarti, Daniel Gosden, Nguyen Hao Le, Jonathan Rossiter
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2020.0289
       
  • Wire Arc Additive Manufacturing Process for Topologically Optimized
           Aeronautical Fixtures

    • Free pre-print version: Loading...

      Authors: Fernando Veiga, Alfredo Suárez, Eider Aldalur, Igor Goenaga, Jaime Amondarain
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2021.0008
       
  • Productivity Comparison Between Vat Polymerization and Fused Filament
           Fabrication Methods for Additive Manufacturing of Polymers

    • Free pre-print version: Loading...

      Authors: Dominik Muenks, Yordan Kyosev
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2021.0009
       
  • Optimization of the Impact Attenuation Capability of Three-Dimensional
           Printed Hip Protector Produced by Fused Deposition Modeling Using Response
           Surface Methodology

    • Free pre-print version: Loading...

      Authors: Suleiman Abimbola Yahaya, Zaidi Mohd Ripin, Mohamad Ikhwan Zaini Ridzwan
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2021.0014
       
  • Fabrication of Temperature- and Humidity-Independent Silver Nanoparticle's
           Carbon Composite-Based Strain Sensor Through Additive Manufacturing
           Process

    • Free pre-print version: Loading...

      Authors: Iqbal Nadeem, Sajid Memoon, Rahman Khalid, Amin Qausaria Tahseen, Muhammad Shakeel, Ahmad Salman, Amin Mohsin
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2021.0032
       
  • 3D Printed Housing Devices for Segregated Compartmental Delivery of Oral
           Fixed-Dose Anti-Tubercular Drugs Adopting Print and Fill Strategy

    • Free pre-print version: Loading...

      Authors: Tushar Kanti Malakar, Vishal Sharad Chaudhari, Santosha Kumar Dwivedy, Upadhyayula Suryanarayana Murty, Subham Banerjee
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2021.0037
       
  • Effect of Alloying Powders on Microstructure and Mechanical Properties of
           Aluminum Alloy Arc Additive Manufacturing

    • Free pre-print version: Loading...

      Authors: Liwei Wang, Huan Hu, Tao Wu, Aiping Liu, Ziqin Wu, Qian Wang, Balaji Narayanaswamy, Zhimin Liang, Dianlong Wang, Guang Yang
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-12T07:00:00Z
      DOI: 10.1089/3dp.2021.0055
       
  • Multiresin Additive Manufacturing Process for Printing a Complete Denture
           and an Analysis of Accuracy

    • Free pre-print version: Loading...

      Authors: Cho-Pei Jiang, M. Fahrur Rozy Hentihu, Shyh-Yuan Lee, Richard Lin
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-07-07T07:00:00Z
      DOI: 10.1089/3dp.2021.0007
       
  • Chemical Polishing of Additively Manufactured, Porous, Nickel–Titanium
           Skeletal Fixation Plates

    • Free pre-print version: Loading...

      Authors: Agnieszka Chmielewska, Ahmadreza Jahadakbar, Bartłomiej Wysocki, Mohammad Elahinia, Wojciech Święszkowski, David Dean
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-06-25T07:00:00Z
      DOI: 10.1089/3dp.2020.0209
       
  • Applicability of Poly(styrene–butadiene–styrene) for Three-Dimensional
           Printing of Tissue-Equivalent Samples

    • Free pre-print version: Loading...

      Authors: Angelina Bulavskaya, Yury Cherepennikov, Boris Gavrikov, Anna Grigorieva, Evgeny Grigoriev, Irina Miloichikova, Sergei Stuchebrov
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-06-25T07:00:00Z
      DOI: 10.1089/3dp.2021.0028
       
  • 3D Printing of MgAl2O4 Spinel Mesh and Densification Through Pressure-Less
           Sintering and Hot Isostatic Pressing

    • Free pre-print version: Loading...

      Authors: Aparna Adumbumkulath, Crystal Shin, Ghanashyam S. Acharya, Papiya Biswas, Mamatha Sirisala, Roy Johnson, Padmanabham Gade
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-06-14T07:00:00Z
      DOI: 10.1089/3dp.2021.0034
       
  • Fracture Toughness of Three-Dimensional Stereolithography Printed Polymer
           Reinforced with Continuous Carbon Fibers

    • Free pre-print version: Loading...

      Authors: Yue Lu, Xiao Xiao Han, Andrew Gleadall, Li-Guo Zhao
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-06-09T07:00:00Z
      DOI: 10.1089/3dp.2020.0310
       
  • Adaptable Method for Dynamic Planning of 3D Spatial Wireframes Extrusion
           with Neural Networks and Robotic Automation

    • Free pre-print version: Loading...

      Authors: Dan Luo, Weiguo Xu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-06-02T07:00:00Z
      DOI: 10.1089/3dp.2020.0176
       
  • Mechanical Properties of Thermoplastic Polyurethane-Based
           Three-Dimensional-Printed Lattice Structures: Role of Build Orientation,
           Loading Direction, and Filler

    • Free pre-print version: Loading...

      Authors: Victor Beloshenko, Yan Beygelzimer, Vyacheslav Chishko, Bogdan Savchenko, Nadiya Sova, Dmytro Verbylo, Iurii Vozniak
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-05-14T07:00:00Z
      DOI: 10.1089/3dp.2021.0031
       
  • Optimization of Freeze-FRESH Methodology for 3D Printing of Microporous
           Collagen Constructs

    • Free pre-print version: Loading...

      Authors: Thais Sousa, Nilabh Kajave, Pengfei Dong, Linxia Gu, Stephanie Florczyk, Vipuil Kishore
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-05-12T07:00:00Z
      DOI: 10.1089/3dp.2020.0311
       
  • Evaluation of Different Root Canal Obturation Techniques in Internal Root
           Resorption of Three-Dimensional Printed Teeth Manufactured Using Computer
           Software

    • Free pre-print version: Loading...

      Authors: Senem Yiğit Özer, Hicran Dönmez Özkan, İlayda Oyucu
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-05-06T07:00:00Z
      DOI: 10.1089/3dp.2021.0012
       
  • Structural Analysis of Voxel-Based Lattices Using 1D Approach

    • Free pre-print version: Loading...

      Authors: Antonio Bacciaglia, Alessandro Ceruti, Alfredo Liverani
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-04-16T07:00:00Z
      DOI: 10.1089/3dp.2020.0178
       
  • Consumer Assessment of 3D-Printed Food Shape, Taste, and Fidelity Using
           Chocolate and Marzipan Materials

    • Free pre-print version: Loading...

      Authors: Stefania Chirico Scheele, Christina Hartmann, Michael Siegrist, Martin Binks, Paul F. Egan
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-04-16T07:00:00Z
      DOI: 10.1089/3dp.2020.0271
       
  • Roughness and Near-Surface Porosity of Unsupported Overhangs Produced by
           High-Speed Laser Powder Bed Fusion

    • Free pre-print version: Loading...

      Authors: Mfanufikile Shange, Ina Yadroitsava, Anton du Plessis, Igor Yadroitsev
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-04-12T07:00:00Z
      DOI: 10.1089/3dp.2020.0097
       
  • Three-Dimensional Printing of Double-Network Hydrogels: Recent Progress,
           Challenges, and Future Outlook

    • Free pre-print version: Loading...

      Authors: Puskal Kunwar, Mark James Ransbottom, Pranav Soman
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-03-22T07:00:00Z
      DOI: 10.1089/3dp.2020.0239
       
  • Microstructure and Properties of Al-6.0Mg-0.3Sc Alloy Deposited by
           Double-Wire Arc Additive Manufacturing

    • Free pre-print version: Loading...

      Authors: Lingling Ren, Huimin Gu, Wei Wang, Shuai Wang, Chengde Li, Zhenbiao Wang, Yuchun Zhai, Peihua Ma
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-02-04T08:00:00Z
      DOI: 10.1089/3dp.2020.0039
       
  • 3D Printed Formwork for Concrete: State-of-the-Art, Opportunities,
           Challenges, and Applications

    • Free pre-print version: Loading...

      Authors: Andrei Jipa, Benjamin Dillenburger
      First page: 84
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-27T07:00:00Z
      DOI: 10.1089/3dp.2021.0024
       
  • Additive Fabrication of Large-Scale Customizable Formwork Using Robotic
           Fiber-Reinforced Polymer Winding

    • Free pre-print version: Loading...

      Authors: Ya Ou, Ding-Wen Bao, Guan-Qi Zhu, Dan Luo
      First page: 109
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-17T07:00:00Z
      DOI: 10.1089/3dp.2020.0358
       
  • Overcoming Environmental Stress Cracking of FDM 3D Printed Formwork for
           Counter-Pressure Casting of Concrete

    • Free pre-print version: Loading...

      Authors: Nicolas Ruffray, Lex Reiter, Robert Johann Flatt
      First page: 122
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-09-14T07:00:00Z
      DOI: 10.1089/3dp.2021.0006
       
  • Temperature Analyses in Fused Filament Fabrication: From Filament Entering
           the Hot-End to the Printed Parts

    • Free pre-print version: Loading...

      Authors: Jie Zhang, Egle Vasiliauskaite, Alec De Kuyper, Cédric De Schryver, Frederik Vogeler, Frederik Desplentere, Eleonora Ferraris
      First page: 132
      Abstract: 3D Printing and Additive Manufacturing, Ahead of Print.

      Citation: 3D Printing and Additive Manufacturing
      PubDate: 2021-06-16T07:00:00Z
      DOI: 10.1089/3dp.2020.0339
       
 
JournalTOCs
School of Mathematical and Computer Sciences
Heriot-Watt University
Edinburgh, EH14 4AS, UK
Email: journaltocs@hw.ac.uk
Tel: +00 44 (0)131 4513762
 


Your IP address: 3.230.142.168
 
Home (Search)
API
About JournalTOCs
News (blog, publications)
JournalTOCs on Twitter   JournalTOCs on Facebook

JournalTOCs © 2009-