Similar Journals
![]() |
Open Ceramics
Number of Followers: 2 ![]() ISSN (Online) 2666-5395 Published by Elsevier ![]() |
- Thermal shock resistance of industrial foam filters-a comparative study
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): Celaida Gayle Gumban, Jana Hubálková, Marc Neumann, Eric Werzner, Alexandros Charitos, Christos G. Aneziris, Claudia Voigt
- Synthesis of equimolar solid solution of zirconium and hafnium diborides
by vacuum-thermal routes
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): O. Vasiliev, D. Vedel, V. Muratov, P. Mazur, O. Chudinovych, V. Bekenev, O. Olifan, V. Bilyi, V. Kartuzov
- MgO–C refractories based on refractory recyclates and
environmentally friendly binders
Abstract: Publication date: Available online 19 September 2023Source: Open CeramicsAuthor(s): Till M.J. Stadtmüller, Enrico Storti, Nora Brachhold, Anna-Marie Lauermannová, Ondřej Jankovský, Thomas Schemmel, Jana Hubálková, Patrick Gehre, Christos G. Aneziris
- Comparative study between coal tar pitch and lower polycyclic aromatic
hydrocarbon (PAH) alternative binders for use in taphole clays
Abstract: Publication date: Available online 17 September 2023Source: Open CeramicsAuthor(s): I.J.-P. Cameron, S. Ramjee, A.M. Garbers-Craig
- Recycling insight into the ceramic tile manufacturing industry
Abstract: Publication date: Available online 16 September 2023Source: Open CeramicsAuthor(s): Giacomo Boschi, Giuliana Bonvicini, Giulia Masi, Maria Chiara Bignozzi
- Deterioration mechanism of Al2O3–MgO refractory castable in RH refining
ladle
Abstract: Publication date: Available online 16 September 2023Source: Open CeramicsAuthor(s): Junfeng Chen, Yu Zhang, Guangping Liu, Guoping Wei, Yi Zhao, Wen Yan, Nan Li
- The influence of Ca-, Na-, and P-content of Mgo-based resin-free
vibrateable dry tundish linings on the population of non-metallic
inclusions in a steel melt
Abstract: Publication date: Available online 15 September 2023Source: Open CeramicsAuthor(s): D. Veres, F. Kerber, S. Dudczig, S. Horn, C. Setzer, K. Lippold, C.G. Aneziris
- Effect of the Al2O3 content on the microstructure evolution of
flash-sintered Al2O3–8YSZ ceramics
Abstract: Publication date: Available online 15 September 2023Source: Open CeramicsAuthor(s): Shu Yao, Yongsheng Liu, Dianguang Liu, Ke Zhao, Jinling Liu
- Morphology dependent photocatalytic efficiency of nano ZnO towards Azure a
dye
Abstract: Publication date: Available online 12 September 2023Source: Open CeramicsAuthor(s): G. Revathi, N. Uma Sangari
- Yttria magnesia co-stabilized zirconia refractories for application as
functional components in continuous steel casting
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): Claudia Heuer, Steffen Dudczig, Nora Brachhold, Christos G. Aneziris, Ratana Soth, Angelika Priese, Christoph Wöhrmeyer, Christopher Parr
- Flame-sprayed MgAl2O4- and calcium aluminate-based coatings for
application in the aluminium industry
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): P. Gehre, C. Wöhrmeyer, C. Parr, C.G. Aneziris
- Steel ceramic composite anodes based on recycled MgO–C lining bricks for
applications in cryolite/aluminum melts
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): S. Yaroshevskyi, С. Weigelt, P. Malczyk, V. Roungos, J. Hubalkova, T. Zienert, B. Kraft, S. Wagner, C.G. Aneziris
- Effects of WC contamination on the densification of spark plasma sintered
monolithic HfB2
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): Sadjad Mashayekh, Hamid Reza Baharvandi
- Principles and approaches for the machining simulation of ceramic matrix
composites at microscale: A review and outlook
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): Simon Unseld, Ralf Goller, Dietmar Koch
- Effect of stabilizer and binder on the phase formation in zirconia
castables for application in secondary steel industry
Abstract: Publication date: Available online 9 September 2023Source: Open CeramicsAuthor(s): Claudia Heuer, Steffen Dudczig, Christos G. Aneziris, Ratana Soth, Angelika Priese, Christoph Wöhrmeyer, Christopher Parr
- Thermally resistant geopolymer to 1300 °C: Scale-up and
structural evolution
Abstract: Publication date: Available online 9 September 2023Source: Open CeramicsAuthor(s): Ouamara Lila, Gharzouni Ameni, Naït-Ali Benoit, Jouin Jenny, Babule Guillaume, Duport Patrice, Chinaya Clifford, Guillaume Eric, Sylvie Rossignol
- Investigation of the influence of impurities typical in secondary raw
materials on the behavior of high alumina castables – Part 1: Design of
the castables, setting properties and high temperature fracture behavior
Abstract: Publication date: Available online 9 September 2023Source: Open CeramicsAuthor(s): Laura Erbar, Katharina Sarnow, Olaf Krause, Erwan Brochen, Christian Dannert, Jacek Podwórny, Karolina Dudek, Robert Kusiorowski
- Mechanochemical synthesis and characterization of strontium substituted
apatite for biomedical application
Abstract: Publication date: Available online 7 September 2023Source: Open CeramicsAuthor(s): Yuta Otsuka, Besim Ben-Nissan, Hiroshi Kono, Tetsuo Sasaki, Masafumi Kikuchi
- Impact of the reduction of graphite content in critical properties of
MgO–C bricks for steelmaking industry
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): M.N. Moliné, S.E. Gass, P.G. Galliano, D. Gutiérrez-Campos, A.G. Tomba Martinez
- Automated feature analysis as a tool for non-metallic inclusion analysis
in solidified metals
Abstract: Publication date: Available online 4 September 2023Source: Open CeramicsAuthor(s): Florian Kerber, Marc Neumann, Steffen Dudczig, Gert Schmidt, Jana Hubálková, Christos G. Aneziris
- Corrosion mechanisms of Al2O3-SiC-C refractory castables by iron and slag
based on post-mortem analysis of industrial samples
Abstract: Publication date: Available online 4 September 2023Source: Open CeramicsAuthor(s): Darban Sina, Laurent Cassayre, Simon Chiartano, Laurie Lacarrière, Martin Cyr, Cédric Patapy, Pascal Prigent
- Influence of the acrylamide-based monomer on the sintering of ceramics
shaped by gelcasting
Abstract: Publication date: Available online 3 September 2023Source: Open CeramicsAuthor(s): Laurie Gaüzère, Clémence Besnard, Maël Pontoreau, Stéphane Carlotti, Samuel Couillaud, Jean-Marc Heintz
- Comparison of solidification behavior of synthetic mullite and
mullite-forming raw materials by aero-acoustic levitation
Abstract: Publication date: Available online 2 September 2023Source: Open CeramicsAuthor(s): D. Mühmer, J. Niessen, T. Tonnesen, J. Gonzalez-Julian
- Steel ceramic composites resistant to long-term contact with molten
aluminum alloys
Abstract: Publication date: Available online 1 September 2023Source: Open CeramicsAuthor(s): Piotr Malczyk, Tilo Zienert, Florian Kerber, Jana Hubálková, Gert Schmidt, Nora Brachhold, Christos G. Aneziris
- On the structure of Ag-containing sol-gel bioactive glasses: A surface
crystal growth of metallic silver removes its network modifier role in the
glass structure
Abstract: Publication date: Available online 1 September 2023Source: Open CeramicsAuthor(s): Roger Borges, Juliana S.S. Oliveira, Antônia P. Queiroz, Telma Zambanini, Akiko M. Hanashiro, Nelson B. Lima, José F. Schneider, Juliana Marchi
- Influence of on-off pulsed current pattern on processes during spark
plasma sintering of MgB2 superconductor
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): G. Aldica, V. Sandu, S. Popa, I. Pasuk, M. Enculescu, A.M. Ionescu, P. Badica
- Recyclate-containing magnesia-carbon refractories – Influence on the
non-metallic inclusions in steel
Abstract: Publication date: Available online 30 August 2023Source: Open CeramicsAuthor(s): Kirsten Moritz, Florian Kerber, Steffen Dudczig, Gert Schmidt, Thomas Schemmel, Matthias Schwarz, Helge Jansen, Christos G. Aneziris
- Novel microporous MgO-based high-temperature thermal insulator
Abstract: Publication date: Available online 30 August 2023Source: Open CeramicsAuthor(s): Rafael Salomão, Leandro Fernandes, Luís Carlos Simão
- Investigation of the role of impurities typical in secondary raw materials
on the behaviour of high alumina castables - Part II: Influence on
thermomechanical behaviour
Abstract: Publication date: Available online 29 August 2023Source: Open CeramicsAuthor(s): Jacek Podwórny, Karolina Dudek, Magdalena Kujawa, Robert Kusiorowski, Erwan Brochen, Christian Dannert, Olaf Krause, Laura Erbar, Katharina Sarnow
- High temperature innovative zirconia-alumina ramming mass
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): Valeriy V. Martynenko, Irina G. Shulyk, Volodymir V. Prymachenko, Pavlo O. Kushchenko
- Alkali-activated cement manufactured by the alkaline activation of
demolition and construction waste using brick and concrete wastes
Abstract: Publication date: December 2023Source: Open Ceramics, Volume 16Author(s): Angelica Cardoza, Henry A. Colorado
- Comparison of conventional crushing and high-voltage pulsed power
technology as techniques for disaggregating different types of spent
magnesia-carbon refractory bricks during recycling
Abstract: Publication date: Available online 25 August 2023Source: Open CeramicsAuthor(s): Andrie Garbers-Craig, Natasia Naude
- Structure and phase composition of ceramics based on pre-treated municipal
incinerator bottom ash
Abstract: Publication date: Available online 23 August 2023Source: Open CeramicsAuthor(s): Alexander Karamanov, Emilia Karamanova, Georgi Avdeev, Iskra Piroeva
- Impact of substituting K2O for Na2O on physico-chemical properties and in
vitro bioactivity of bioactive glass S53P4
Abstract: Publication date: Available online 22 August 2023Source: Open CeramicsAuthor(s): Polina Sinitsyna, Markus Engblom, Leena Hupa
- Glassy and crystalline sodium ternary chalcogenide materials in the
Na–As–Se system: Synthesis, properties and relation to crystallization
Abstract: Publication date: Available online 16 August 2023Source: Open CeramicsAuthor(s): A. Sammoury, M. Kassem, M. Bokova, Tayssir Hamieh, J. Toufaily, E. Bychkov
- Influence of deflocculants on the cement hydrate phase formation and
technological properties of CAC-bonded castables during the first heating
process
Abstract: Publication date: Available online 16 August 2023Source: Open CeramicsAuthor(s): B. Noll, T. Stein, R.,O. Krause, R. Simmat
- Review on high-pressure spark plasma sintering and simulation of the
impact of die/punch material combinations on the sample temperature
homogeneity
Abstract: Publication date: Available online 14 August 2023Source: Open CeramicsAuthor(s): Matěj Nižňanský, Kim Vanmeensel, Jozef Vleugels, Václav Tyrpekl, Monika Vilémová
- Liquid single-source-precursor synthesis and phase evolution of SiC-HfC-C
ceramics nanocomposites with core-shell structured SiC@C and HfC@C
nanoparticles
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Zhaoju Yu, Zhenyue Wang, Xichao Dong, Jia Sun, Xingang Luan, Ralf Riedel
- The dielectric properties of polymer derived silicon oxycarbonitride film
incorporated with TiO2 for electromagnetic wave absorption
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Lung-Hao Hu, Ming-Hua Li
- Influence of the nature and concentration of alkali cations in silicate
solutions on the behavior of MK-CaCO3 based geopolymers at 600–1150 °C
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Quentin Cligny, Damien Brandt, Ameni Gharzouni, Sylvie Rossignol
- The effect of temperature and atmospheric-pressure on mechanical and
electrical properties of polymer-derived SiC fibers
Abstract: Publication date: Available online 7 August 2023Source: Open CeramicsAuthor(s): Young Jin Shim, Sang Hyun Joo, Hyuk Jun Lee, Kwang Youn Cho, Young Jun Joo
- Studies on the use of two different magnesia-carbon recyclates as
secondary raw material for MgO–C refractories
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Kirsten Moritz, Nora Brachhold, Felix Küster, Steffen Dudczig, Thomas Schemmel, Christos G. Aneziris
- In situ layer formation on MgO–C refractories with different MgO grade
by static and dynamic contact with liquid steel
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Florian Kerber, Tilo Zienert, Konrad Kerber, Steffen Dudczig, Thomas Schemmel, Helge Jansen, Christos G. Aneziris
- Mineralogical and microstructural characterization of ceramics from the
fifth and fourth millennium BC in the central plateau of Iran
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Maria Daghmehchi, Chiara Coletti, Dong Hyeok Moon, Mohammad Esmaeil Esmaeili Jelodar, Hadi Omrani, Arianit A. Reka, Ali Nematollahzadeh, Mohammadamin Emami
- Templated grain growth in rapid sintered 3D-printed alumina ceramics
Abstract: Publication date: Available online 4 August 2023Source: Open CeramicsAuthor(s): Anna-Katharina Hofer, Andraž Kocjan, Raul Bermejo
- Dissolution-precipitation synthesis and cold sintering of mussel
shells-derived hydroxyapatite and hydroxyapatite/chitosan composites for
bone tissue engineering
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Anna Galotta, Kristaps Rubenis, Janis Locs, Vincenzo M. Sglavo
- Combined steel melt filtration through reactive and active filters
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Enrico Storti, Florian Kerber, Steffen Dudczig, Ruben Wagner, Anja Weidner, Horst Biermann, Christos G. Aneziris
- Suitable electrospinning approaches for recombinant spider silk proteins
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Christoph Sommer, Thomas Scheibel
- Phase equilibria in the ZrO2–HfO2–Nd2O3 system at 1500 °C and 1700
°C
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Yu.V. Yurchenko, O.A. Korniienko, O.I. Bykov, A.V. Samelyuk, S.V. Yushkevych, M.V. Zamula
- Solidification of two fused cast Al2O3–ZrO2–SiO2 materials in an aero
acoustic levitator
Abstract: Publication date: Available online 29 July 2023Source: Open CeramicsAuthor(s): Jonas Niessen, D. Muehmer, T. Tonnesen, R. Telle, J. Gonzalez-Julian
- Contribution of high-temperature 3D-Digital Image Correlation to
investigate the creep behaviour of refractory materials
Abstract: Publication date: Available online 28 July 2023Source: Open CeramicsAuthor(s): Gilles Dusserre, Thomas Pottier, Thierry Cutard
- Stress intensity factor and fatigue crack propagation assessment of mode-I
failure in alumina-calcium hexaluminate refractories
Abstract: Publication date: Available online 27 July 2023Source: Open CeramicsAuthor(s): Guanglin Dong, Liping Pan, Tian Huang, Yichen Chen, Ning Liao, Tianbin Zhu, Qinghu Wang, Sijia Liang, Jun Xu, Yu Wang
- Cotton-wool-like borosilicate glass fibers for tissue regeneration:
Preparation, characterization and in vitro bioactivity
Abstract: Publication date: Available online 26 July 2023Source: Open CeramicsAuthor(s): Susanta Sengupta, Liliana Liverani, Dušan Galusek, Aldo R. Boccaccini
- Impact of different metakaolin mixtures on oligomer formation and
geopolymer properties: Impurity effect
Abstract: Publication date: Available online 24 July 2023Source: Open CeramicsAuthor(s): W.C. N'cho, A. Gharzouni, J. Jouin, S. Rossignol
- The influence of firing parameters on the formation of nitride phases in
nitride bonded silicon carbides
Abstract: Publication date: Available online 23 July 2023Source: Open CeramicsAuthor(s): J.T. Kehren, T. Steffen, M. Hauke, C. Linden, C. Dannert, O. Krause
- Prediction of glass phase viscosity in firing traditional ceramics and
porcelain tiles with waste glass powder
Abstract: Publication date: Available online 22 July 2023Source: Open CeramicsAuthor(s): L.I.P. Baccarin, W.V. Bielefeldt, S.R. Bragança
- Additive manufacturing of SiCNO polymer-derived ceramics via step-growth
polymerization
Abstract: Publication date: Available online 21 July 2023Source: Open CeramicsAuthor(s): Stephan Andrew Brinckmann, Jia Yao, Jason Cody Young, Matthew Hollis Jones, Ray Stuart Fertig III, Carl Pieter Frick
- Assessment of in-vitro bioactivity, biodegradability and antibacterial
activity of polymer-derived 3D printed åkermanite scaffolds
Abstract: Publication date: Available online 17 July 2023Source: Open CeramicsAuthor(s): Fulden Dogrul, Vera Bednarzig, Hamada Elsayed, Liliana Liverani, Dušan Galusek, Enrico Bernardo, Aldo R. Boccaccini
- Morphology characterization for refractory aggregates
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Muhan Wu, Shengli Jin
- Novel colloidal silica technology for MgO-containing refractories – Part
1: Anti-hydroxylation binder
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Rafael Salomão, Isabela S. Martinatti, Leandro Fernandes, Sundblom Andreas, Peter Greenwood, Paulo R.T. Tiba
- A novel test specimen for strength testing of ceramics for additive
manufacturing
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Maximilian Staudacher, Tanja Lube, Jürgen Glettler, Uwe Scheithauer, Martin Schwentenwein
- Chemistry, structure, and thermodynamic stabilization of SiOC polymer
derived ceramics made from commercial precursors
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Gerson J. Leonel, Xin Guo, Gurpreet Singh, Alexandra Navrotsky
- Analysis of non-ionic surfactants on the rheological and interparticle
response of polymer enhanced colloids for investment casting slurries
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Noel A. O'Sullivan, David Tanner
- Humidity resistance and recovery of sintered sodium potassium
niobate-based piezoelectrics
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Gianni Ferrero, Malgorzata K. Pierchala, Konstantin Astafiev, Erling Ringgaard, Bhaskar Reddy Sudireddy, Astri Bjørnetun Haugen
- Influence of the type of phosphate additive and its concentration on the
setting kinetics of CA cement bonded refractory castables with special
regard to the resulting pH value
Abstract: Publication date: Available online 16 July 2023Source: Open CeramicsAuthor(s): J. Kasper, M. Bastian, C. Dannert
- Hybrid ceramic insulation made of oxide fiber ceramic matrix composite and
paper-based ceramic for hot forming tools
Abstract: Publication date: Available online 14 July 2023Source: Open CeramicsAuthor(s): Elmar Galiev, Ricardo Trân, Sven Winter, Felix Lindner, Georg Puchas, Cornell Wüstner, Mandy Thomas, Stefan Knohl, Verena Psyk, Stefan Schafföner, Walter Krenkel, Verena Kräusel
- Dolomite thermal behaviour: A proposal to establish a definitive
decomposition mechanism in a convective air atmosphere
Abstract: Publication date: Available online 14 July 2023Source: Open CeramicsAuthor(s): L.C. Resio
- Comparison of microstructure, sintering behavior, and biological response
of sol-gel and melt-derived 13–93 bioactive glass scaffolds
Abstract: Publication date: Available online 11 July 2023Source: Open CeramicsAuthor(s): Q. Nawaz, A. de Pablos-Martín, A.T. Contreras Jaimes, F. Scheffler, T. Wagner, D.S. Brauer, A.R. Boccaccini
- Influence of cation vacancy concentrations on ultra-low thermal
conductivity in (1-x)BiVO4 – xBi2/3MoO4 scheelite solid solutions
Abstract: Publication date: Available online 10 July 2023Source: Open CeramicsAuthor(s): Guillaume F. Nataf, Hicham Ait Laasri, Damien Brault, Tatiana Chartier, Chalit Ya, Fabian Delorme, Isabelle Monot-Laffez, Fabien Giovannelli
- A refractory engineering program for the 21 st century
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Michel Rigaud, Jacques Poirier, Marc Huger, Thorsten Tonnesen, Victor Pandolfelli
- Phase transformation of cold-sintered doped barium titanate ceramics
during the post-annealing process
Abstract: Publication date: Available online 29 June 2023Source: Open CeramicsAuthor(s): Maliha Siddiqui, Daniel Valášek, Yang Bai, David Salamon
- Investigation of the feasibility of processing the Alumina slurry through
an economic vat photopolymerization process
Abstract: Publication date: Available online 28 June 2023Source: Open CeramicsAuthor(s): Seema Negi, Parag Bhargava, Prasanna Gandhi
- Advanced manufacturing methods for ceramic and bioinspired ceramic
composites: A review
Abstract: Publication date: Available online 28 June 2023Source: Open CeramicsAuthor(s): Keivan Nazari, Phuong Tran, Ping Tan, Abdallah Ghazlan, Tuan D. Ngo, Yi Min Xie
- Synthesis and characterization of graphene nanoplatelets-containing fibers
by electrospinning
Abstract: Publication date: Available online 27 June 2023Source: Open CeramicsAuthor(s): Enrico Storti, Michal Lojka, Simona Lencová, Jana Hubálková, Ondřej Jankovský, Christos G. Aneziris
- Investigation of the milling route for the development of colloidal
suspensions to be used as binder in refractory castables
Abstract: Publication date: Available online 25 June 2023Source: Open CeramicsAuthor(s): S. Abdelouhab, C. Lang, C. Delmotte, V. Vandeneede, M. Thiesen, L. Ibarra, O. Krause, E. Brochen, C. Dannert
- Tin-functionalized silicon oxycarbide as a stable, high-capacity anode
material for Na-ion batteries
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): Alexander Kempf, Samira Kiefer, Magdalena Graczyk-Zajac, Emanuel Ionescu, Ralf Riedel
- Characterisation of energy-dissipating mechanisms by Acoustic Emission
technique during mechanical loading of Ti2AlC and Ti3AlC2 MAX phases:
Influence of phase composition and porosity
Abstract: Publication date: Available online 22 June 2023Source: Open CeramicsAuthor(s): Elise Hugon, Olivier Rapaud, Romain Lucas, Thierry Chotard
- SiC/SiC ceramic matrix composites with BN interphase produced by gas phase
routes: An overview
Abstract: Publication date: Available online 20 June 2023Source: Open CeramicsAuthor(s): Pierre Fenetaud, Sylvain Jacques
- Wetting and interfacial behavior of Fe, Co, Ni on (Ti, Zr, Hf, Nb, Ta)C
high entropy ceramics
Abstract: Publication date: Available online 19 June 2023Source: Open CeramicsAuthor(s): D. Vedel, M. Storozhenko, P. Mazur, V. Konoval, M. Skoryk, O. Grigoriev, Mark Heaton, Anatoliy Zavdoveev
- Making foam-like bioactive glass scaffolds by vat photopolymerization
Abstract: Publication date: Available online 19 June 2023Source: Open CeramicsAuthor(s): Francesco Baino, Joana Dias, Mojtaba Alidoost, Martin Schwentenwein, Enrica Verné
- Resource efficiency and energy efficiency (REEE) in the Portuguese ceramic
industry: Towards net zero carbon production
Abstract: Publication date: Available online 17 June 2023Source: Open CeramicsAuthor(s): Ian M. Reaney, Ben Walsh, Paula M. Vilarinho
- Effects of oxidation on the effective thermomechanical properties of
porous ultra-high temperature ceramics in compression via computational
micromechanics and MPM
Abstract: Publication date: Available online 16 June 2023Source: Open CeramicsAuthor(s): Brenton A. Morris, Stefan J. Povolny, Gary D. Seidel, Carolina Tallon
- Effect of milling parameters on the morphology and sinterability of the
yttrium oxide powders for transparent ceramics
Abstract: Publication date: Available online 15 June 2023Source: Open CeramicsAuthor(s): Dariia G. Chernomorets, Andreana Piancastelli, Laura Esposito, Jan Hostaša
- The use of bundles with higher filament count for cost reduction of
high-strength oxide ceramic composites
Abstract: Publication date: Available online 15 June 2023Source: Open CeramicsAuthor(s): Renato S.M. Almeida, Maroof A. Hoque, Walter E.C. Pritzkow, Kamen Tushtev, Kurosch Rezwan
- Thermal properties of SiC-bonded diamond materials produced by liquid
silicon infiltration
Abstract: Publication date: Available online 12 June 2023Source: Open CeramicsAuthor(s): B. Matthey, S. Kunze, A. Kaiser, M. Herrmann
- Subcritical crack growth models for SiC fiber in air and steam: Low
temperature data and possible effects of residual stress
Abstract: Publication date: Available online 4 June 2023Source: Open CeramicsAuthor(s): Randall S. Hay, Marina Ruggles-Wrenn, Scott J. Robertson, Benjamin R. Steffens, Matthew W. Piper, Theodore R. Shillig, Ronald K. Mitchell, Brian M. Kroeger, Logan M. Gumucio, Caleigh M. Nelson, Richard J. Reinink
- Flame-sprayed alumina molten metal filters for dead-mould casting
application
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): P. Gehre, S. Takht Firouzeh, G. Schmidt, S. Dudczig, B. Kiefer, C.G. Aneziris
- Ultra-high-frequency radio-transparent ceramics of cordierite composition
doped with MgO–Al2O3–B2O3–SiO2 glass: Synthesis, microstructure,
thermal and physical properties
Abstract: Publication date: September 2023Source: Open Ceramics, Volume 15Author(s): A.V. Zaichuk, А.A. Amelina, Y.S. Hordieiev, Y.R. Kalishenko
- Oxidation studies of SiC-coated 2.5D carbon fibre preforms
Abstract: Publication date: Available online 2 June 2023Source: Open CeramicsAuthor(s): S.R.C.Murthy Tammana, Vinothini Venkatachalam, Ji Zou, Matthew Porter, Jon Binner
- Photoinduced thiol-ene “click” chemistry for resource-efficient curing
of polysilazane-based coatings and its effects on coating property profile
Abstract: Publication date: Available online 1 June 2023Source: Open CeramicsAuthor(s): Michael Hoffmann, Mohamad Zahedtalaban, Jakob Denk, Alexander Horcher, Holger Ruckdäschel, Stefan Schafföner, Günter Motz
- Investigation of process influences on the amount of single-fiber
siliconization in C/C–SiC samples by machine-learning methods
Abstract: Publication date: Available online 1 June 2023Source: Open CeramicsAuthor(s): Tobias Lehnert, Bernhard Heidenreich, Dietmar Koch
- Influence of filter surface roughness on the pressure drop of ceramic foam
filters
Abstract: Publication date: Available online 1 June 2023Source: Open CeramicsAuthor(s): Claudia Voigt, Eric Werzner, Robert Fritzsch, Jana Hubálková, Massoud Hassanabadi, Ragnhild E. Aune, Murilo D.M. Innocentini, Christos G. Aneziris
- How is it possible to get optimal infiltration fronts during chemical
vapor infiltration with thermal gradients '
Abstract: Publication date: Available online 29 May 2023Source: Open CeramicsAuthor(s): Gerard L. Vignoles, Cédric Descamps, Carole Charles, Christian Klein
- Characterization of Argentine dolostones with potential application in the
manufacture of refractory materials
Abstract: Publication date: Available online 27 May 2023Source: Open CeramicsAuthor(s): L.C. Resio
- Fused Deposition Modeling and microwave sintering of 3Y-TZP samples
Abstract: Publication date: Available online 26 May 2023Source: Open CeramicsAuthor(s): Clémence Petit, Christophe Meunier, Lucas Manceaux, Hugo Rivera, Hubert Taxil
- Solid-state NMR applied to Si-based polymer derived ceramics: A review
Abstract: Publication date: Available online 26 May 2023Source: Open CeramicsAuthor(s): Christel Gervais
- Effect of Sr-doping on structural, morphological and dielectric properties
of BaTi0.93Sn0.07O3 ferroelectric ceramics
Abstract: Publication date: Available online 19 May 2023Source: Open CeramicsAuthor(s): Mohammad Mohseen Mohammad, Badr Al-Araj, Nasser Saad Al-Din