JournalTOCs

Mechanics Based Design of Structures and Machines: An International Journal
Journal Prestige (SJR): 0.438

Citation Impact (citeScore): 1
Number of Followers: 8

Hybrid journal (It can contain Open Access articles)
ISSN (Print) 1539-7734 - ISSN (Online) 1539-7742
Published by Taylor and Francis

[2652 journals]

Transient road signals simulation strategy in a Stewart platform
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Verónica Santos Arconada Jon García-Barruetabeña a Research Department; Tenneco Automotive Ibérica, Ermua, Spainb Department of Mechanical Engineering, Deusto University, Bilbao, Spain
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-24T09:05:00Z
  DOI: 10.1080/15397734.2024.2394901
Vibration response on the rod of vortex bladeless wind power generator for
a sandwich beam with various face sheets and cores based on different
boundary conditions
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mahsa Pahlavanzadeh Mehdi Mohammadimehr Mohsen Irani-Rahaghi Seyed Mojtaba Emamat Department of Solid Mechanics; Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-24T09:01:39Z
  DOI: 10.1080/15397734.2024.2391920
Damage investigation in steel pipe under pressure and combined bending
moment: Application in structure connected by elbow and reduced tee
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Djezouli Moulai-Khatir Billel Hamza Amir Slamene Mohamed Mokhtari Hicham Tebabna Abdelmoumen Bennadri a LaRTFM Laboratory; Department of Mechanical Engineering, National Polytechnic School of Oran Maurice Audin, Oran, Algeriab Department of Industrial Engineering, Faculty of Technology, Abou Bekr Belkaid University, Tlemcen, Algeria
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-23T12:45:37Z
  DOI: 10.1080/15397734.2024.2394890
Free vibration analysis of functionally graded composite plates reinforced
with linearly and nonlinearly distributed carbon nanotubes in hygrothermal
environments
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zahira Mouas Rachid Tiberkak Yasser Chiker Mourad Bachene Madjid Ezzraimi a Structure Laboratory; Mechanical Department, University of Blida 1, Blida, Algeriab Laboratory of Mechanics, Physics, Mathematical Modeling (LMP2M), University of Medea, Medea, Algeria
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-21T06:57:49Z
  DOI: 10.1080/15397734.2024.2389112
A closed form dynamic stiffness formulation for buckling analysis of
FG-CNTRC plate and plate assemblies with internal line support
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Raj Kumar Prasun Jana Department of Aerospace Engineering; Indian Institute of Technology, Kharagpur, India
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-20T05:41:44Z
  DOI: 10.1080/15397734.2024.2391918
Frequency-band programmable piezoelectric energy harvesters with variable
substrate material, tip mass and fractal architectures: Experimental and
numerical investigations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: S. Mondal T. Mukhopadhyay F. Scarpa S. Naskar a Faculty of Engineering; Design Engineering (CADE), University of Bristol, Bristol, UK
  Pages: 1 - 32
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-20T05:33:32Z
  DOI: 10.1080/15397734.2024.2390074
Active prediction compensation strategy: A new positioning compensation
technique for improving the accuracy of the dual ball screw feed mechanism
under load
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Qi Liu Hong Lu Xinbao Zhang Yongquan Zhang Yongjing Wang Zhangjie Li Min Hu a School of Mechanical; Design, Hokkaido University, Sapporo, Japan
  Pages: 1 - 30
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-19T08:03:53Z
  DOI: 10.1080/15397734.2024.2391942
Semi-analytical results for transient poroelastic behavior of a
functionally graded hollow sphere
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tuan Nguyen-Sy a Laboratory for Computational Mechanics; Institute for Computational Science Computer Engineering, School of Technology, Van Lang University, Ho Chi Minh City, Vietnam
  Pages: 1 - 15
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-17T02:17:05Z
  DOI: 10.1080/15397734.2024.2391914
Vibration analysis of a composite sandwich plate with a viscoelastic
auxetic core, FG-CNTRC interior, and MEE–FGP exterior face sheets
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nima Namazinia Akbar Alibeigloo Mahsa Karimiasl Mechanical Engineering Department; Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
  Pages: 1 - 47
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-17T02:10:12Z
  DOI: 10.1080/15397734.2024.2386134
Investigating the growth of surface crack and high cycle fatigue in
surface-piercing propeller
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mojtaba Pakian Bushehri Mohammad Reza Golbahar Haghighi Parviz Malekzadeh Ehsan Bahmyari a Department of Mechanical Engineering; School of Engineering, Persian Gulf University, Bushehr, Iranb Department of Marine Engineering, School of Engineering, Persian Gulf University, Bushehr, Iran
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-13T01:35:17Z
  DOI: 10.1080/15397734.2024.2389117
Sustainable optimization of micro-milling machining parameters considering
reliability assessment
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pengfei Ding Xianzhen Huang a Naval Architecture; Control of Aero-Propulsion Systems Ministry of Education of China, Northeastern University, Shenyang, PR China
  Pages: 1 - 38
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-09T08:51:01Z
  DOI: 10.1080/15397734.2024.2377257
Optimization of truss structures using multi-objective cheetah optimizer
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sumit Kumar Ghanshyam G. Tejani Pranav Mehta Sadiq M. Sait Ali Riza Yildiz Seyedali Mirjalili a Australian Maritime College; College of Sciences Minerals, Dhahran, Saudi Arabiae Department of Mechanical Engineering, Bursa Uludağ University, Bursa, Türkiyef Department of Computer Engineering, Torrens University Australia – Fortitude Valley Campus, Fortitude Valley, Australia
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-09T06:30:23Z
  DOI: 10.1080/15397734.2024.2389109
Assessing gradient parameters for damage control in notched plates: Finite
element analysis of locally functionally graded materials using the
Gurson-Tvergaard-needleman (GTN) model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Amir Slamene Billel Hamza Mohamed Mokhtari Sadek Gouasmi Rafik Medjahed Abderraouf Ousidhoum Laboratory LaRTFM; Department of Mechanical Engineering, Ecole Nationale Polytechnique d'Oran Maurice Audin, Oran, Algeria
  Pages: 1 - 37
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-08T11:24:03Z
  DOI: 10.1080/15397734.2024.2385025
Nonlinear dynamic modeling and vibration analysis for flexible tethered
satellite systems under large deformations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zahra Jafari Shahbazzadeh Ramin Vatankhah Amin Vahidi-Moghaddam a School of Mechanical Engineering; Shiraz University, Shiraz, Fars, Iranb Department of Mechanical Engineering, MI State University, East Lansing, MI, USA
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-08-05T05:21:50Z
  DOI: 10.1080/15397734.2024.2385688
Tree-type hybrid mechanism configuration synthesis based on modular
decomposition and power-concentrated joint closed-loop design
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yuanfu He Feixiang Liu Zhen Xu Mei Yang a College of Physics; Electrical Engineering, Central South University, Changsha, Hunan, Chinac China Railway Construction Heavy Industry Co., Ltd, Changsha, Hunan, China
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-31T11:00:15Z
  DOI: 10.1080/15397734.2024.2356738
The effective finite element method for free and forced vibration analysis
of 2D-FGSW plates lying an elastic foundation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Van Chinh Nguyen Trung Thanh Tran Mohammed Sobhy Nhan Thinh Hoang Quoc Hoa Pham a Faculty of Mechanical Engineering; Le Quy Don Technical University, Hanoi, Vietnamb Department of Mathematics Technology, Nguyen Tat Thanh University, Ho Chi Minh City, Vietnam
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-31T06:25:19Z
  DOI: 10.1080/15397734.2024.2383958
Development of spoke structure for agricultural non-pneumatic tire based
on the decrease in soil compaction
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Juthanee Phromjan Chakrit Suvanjumrat a Laboratory of Computer Mechanics for Design (LCMD); Department of Mechanical Engineering, Faculty of Engineering, Mahidol University, Salaya, Nakhon Pathom, Thailandb Department of Mechanical Engineering, Faculty of Engineering, Mahidol University, Salaya, Nakhon Pathom, Thailandc Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi, Bangmod, Bangkok, Thailand
  Pages: 1 - 30
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-31T05:36:39Z
  DOI: 10.1080/15397734.2024.2362918
Optimization of brake disk wear loss due to brake pad structure
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Suxia Zhou Junyan Wang Xin Xin Yuduo Sun a School of Mechanical-Electronic; Chemistry, China Academy of Railway Sciences Group Limited, Beijing, China
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-30T06:44:07Z
  DOI: 10.1080/15397734.2024.2385016
Vibration damping by enhancing of magneto-rheological damper performance
using novel smart fluid
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tamer Nabil Mohamed Bakr Aly El-domiaty Mohamed Dawood Tamer M. Mansour a Mechanical Engineering Department; Faculty of Engineering, Suez Canal University, Ismailia, Egyptb Mechanical Engineering Department, Faculty of Engineering, Damanhur University, Beheira, Egypt
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-29T05:58:41Z
  DOI: 10.1080/15397734.2024.2383974
A method to develop a high-fidelity gearbox thermal model based on limited
temperature measurements
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Antonin Monot Thomas Touret Christophe Changenet Fabrice Ville Thierry Grandgeorge Frederic Fayolle a Univ Lyon; Ecam LaSalle, LabEcam, Lyon, Franceb Univ Lyon, INSA Lyon, CNRS, LaMCoS, Villeurbanne, Francec REEL SAS, St-Cyr-au-Mont-d’Or, France
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-29T01:22:28Z
  DOI: 10.1080/15397734.2024.2383962
Approximate modeling of cross-beam multi-axis force/moment sensor through
Gaussian process and partial dependence plots for design optimization
including stress topology
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Bilsay Sümer Mithat Can Özin İlker Murat Koç a Department of Mechanical Engineering; Hacettepe University, Ankara, Turkeyb Department of Mechanical Engineering, Istanbul Technical University, İstanbul, Turkey
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-29T01:20:10Z
  DOI: 10.1080/15397734.2024.2382841
A planar bisection strategy for multipoint path synthesis of four-bar
linkages
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rui Wu Fengping Ning a School of Intelligent Manufacturing; Shanxi Vocational University of Engineering Science Technology, Jinzhong, Chinab School of Mechanical Engineering, North University of China, Taiyuan City, China
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-29T01:16:34Z
  DOI: 10.1080/15397734.2024.2382839
Trajectory design based on frictional resistance of deflector in a
hydraulic radial drilling system
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Biwei Fu Zhiyuan Guo Jia Yan Si Zhang a School of Mechanical Engineering; Yangtze University, Jinzhou, Hubei, Chinab Directional Drilling Engineering Technology Innovation Center of Ministry of Natural Resources, Langfang, Hebei, Chinac Directional Drilling Engineering Technology Innovation Base of Geological Society of China, Langfang, Hebei, Chinad Institute of Exploration Techniques, CAGS, Langfang, Hebei, China
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-27T09:44:44Z
  DOI: 10.1080/15397734.2024.2382837
Improving the natural frequency of the CubeSat structure using voxel-based
topology optimization method with the four-connected seed filling
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Cong Wang Changdong Zhang Dawei Li Tingting Liu Wenhe Liao a Nanjing Research Institute of Electronic Engineering; Nanjing, Chinab School of Mechanical Engineering, Nanjing University of Science Technology, Nanjing, China
  Pages: 1 - 14
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-27T09:37:49Z
  DOI: 10.1080/15397734.2024.2381697
Mesh antenna cable net form finding optimization by an improved NSGA-II
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nanyu Meng Zhiqi Shi Hao Zhu Qinghua Zhou a School of Aeronautics; Engineering Science, Sichuan University, Chengdu, China
  Pages: 1 - 32
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-25T06:44:48Z
  DOI: 10.1080/15397734.2024.2381138
Buckle propagation failure of subsea pipelines; experimental, analytical,
and numerical simulations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mahmoud Alrsai Ala’ Alsahalen Hassan Karampour Mohammad S. Albdour a Department of Civil Engineering; School of Engineering, Al-Hussein Bin Talal University (AHU), Jordanb Griffith School of Engineering Built Environment, Griffith University, QLD, Australia
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-24T05:48:35Z
  DOI: 10.1080/15397734.2024.2382838
Synchronous control method for the walking system of the dual forging
manipulators based on triangular velocity planning
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiaonan Wang Fugang Zhai Runyuan Zhao Yangtao Xing Zhiqiang He a School of Mechanical Engineering; Yanshan University, Qinhuangdao, Chinab Hebei Innovation Center for Equipment Lightweight Design Manufacturing, Qinhuangdao, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-24T05:40:30Z
  DOI: 10.1080/15397734.2024.2381149
Three-dimensional elastoplastic post-buckling analysis of functionally
graded plates using a novel meshfree Tchebychev-radial point interpolation
approach
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Reza Vaghefi Department of Mechanical Engineering; Faculty of Engineering, Fasa University, Fasa, Iran
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-24T05:35:52Z
  DOI: 10.1080/15397734.2024.2379050
A comprehensive investigation of the bending and vibration behavior of
size-dependent functionally graded nanoplates via an enhanced nonlocal
finite element shear model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohamed-Ouejdi Belarbi Soufiane Benounas Abdelhak Khechai Pham Van Vinh Le Truong Son Eugenio Ruocco Aman Garg Soheil Gohari a Laboratoire de Recherche en Génie Civil; LRGC, Université de Biskra, Biskra, Algeriab Department of Civil Engineering, Lebanese American University, Byblos, Lebanonc Institute of Physics Technology, Wuhan, Chinag Department of Multidisciplinary Engineering, The NorthCap University, Gurugram, Haryana, Indiah Department of Mechanical Engineering, The University of Melbourne, Parkville, VIC, Australia
  Pages: 1 - 40
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-23T05:24:16Z
  DOI: 10.1080/15397734.2024.2379521
Simulation and analysis of the electro-hydraulic coordinated system for
the disc brake system in mining belt conveyor
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Meisheng Yang Wen Jiang Jiahan Bao Kun Lian a Anhui Province Key Laboratory of Special Heavy Load Robot; Anhui University of Technology, Maanshan, Chinab Key Laboratory of Hydraulic Waterway Engineering of the Ministry of Education, Chongqing Jiaotong University, Chongqing, Chinac Jiangsu Key Laboratory of Green Process Equipment, Changzhou University, Changzhou, Chinad School of Mechanical Engineering, Anhui University of Technology, Maanshan, Chinae Engineering Technology Research Center of Hydraulic Vibration Technology, Anhui University of Technology, Maanshan, China
  Pages: 1 - 15
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-22T07:03:41Z
  DOI: 10.1080/15397734.2024.2379047
Wave propagation in bidirectional functionally graded tapered beams
incorporating porosity effect
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ouahiba Taleb Mohamed Sekkal Rabbab Bachir Bouiadjra Samir Benyoucef Abdelouahed Tounsi Mahmoud M Selim Khaled Mohamed Khedher a University of Belkaïd Abou BekrTlemcen; Chetouane, Algeriab Faculty of Sciences Humanities, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabiah Department of Civil Engineering, College of Engineering, King Khalid University, Abha, Saudi Arabia
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-22T06:27:45Z
  DOI: 10.1080/15397734.2024.2378087
Analytical solution on magneto-electro-elasto-hygrothermal coupling in
rotating functionally graded piezoelectric/piezomagnetic cylinders on
Winkler elastic foundation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wenshuai Wang Xiaoyuan Shan Jun Xie Xing Li Pengpeng Shi a School of Mathematics; Scientific Computing, Ningxia University, Yinchuan, Ningxia, China
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-22T06:23:09Z
  DOI: 10.1080/15397734.2024.2377251
Design analysis and development of a gantry robot for multi-layer 3-D
concrete printing with simulation and experimental validation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rajan Sahai Ravindra Singh Bisht Siddharth Singh Soraj Kumar Panigrahi a Construction Automation & Robotics (CA&R) Group; CSIR-Central Building Research Institute, Roorkee, Uttarakhand, Indiab Academy of Scientific & Innovative Research (AcSIR), Ghaziabad, Uttar Pradesh, India
  Pages: 1 - 30
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-17T11:22:45Z
  DOI: 10.1080/15397734.2024.2377266
Structural integrity assessment and optimization of control surfaces in
coaxial unmanned aerial vehicles: A case study of a micro coaxial UAV
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Luis A. Reyes-Osorio Victor H. Dominguez Edmundo Javier Ollervides-Vazquez Carlos Garza Octavio Garcia-Salazar a Center for Research; Electrical Engineering, Autonomous University of Nuevo Leon, Apodaca, Nuevo Leon, Mexico; b La Laguna Institute of Technology-TecNM, Torreon, Coahuila, Mexico
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-17T06:24:44Z
  DOI: 10.1080/15397734.2024.2379520
Limit hypersurface state of the art Gaidai multivariate risk evaluation
approach for offshore Jacket
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Oleg Gaidai Yu Cao Yan Zhu Fuxi Zhang Zirui Liu Kelin Wang a Shanghai Ocean University; Shanghai, Chinab Jiangsu University of Science Technology, Zhenjiang, China
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-17T06:16:51Z
  DOI: 10.1080/15397734.2024.2379523
Modeling and reliability analysis of the micro-milling process considering
stochastic tool wear with surrogate models
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pengfei Ding Xianzhen Huang Zhiming Rong Shangjie Li Wei Gao a School of Mechanical Engineering; Automation, Northeastern University, Shenyang, P.R. Chinab Applied Technology College of Dalian Ocean University, Dalian Ocean University, Dalian, P.R. Chinac Automotive Research Institute, China National Heavy Duty Truck Group, Jinan, P.R. China
  Pages: 1 - 30
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-17T05:37:34Z
  DOI: 10.1080/15397734.2024.2373263
Fatigue crack propagation life analysis of propeller
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ronglei Zhang Xiang Li Fanchun Li a Naval Architecture; Ocean Engineering College, Dalian Maritime University, Dalian, Liaoning, Chinab Zibo Transportation Construction Development Center, Zibo, Shandong, Chinac Guangxi Maritime Safety Administration of People’s Republic of China, Nanning, Guangxi, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-16T06:45:20Z
  DOI: 10.1080/15397734.2024.2377260
Design of 2D re-entrant auxetic lattice structures with extreme elastic
mechanical properties
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Reza Hedayati Mojtaba Sadighi Erfan Gholami a Faculty of Mechanical Engineering; K. N. Toosi University of Technology, Tehran, Iranb Department of Mechanical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-15T02:53:53Z
  DOI: 10.1080/15397734.2024.2377263
Identification of excitation frequencies of a vibrating beam using Dynamic
Mode Decomposition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Aayush Talati Manjeet Keshav Mechanical Department; School of Technology, Pandit Deendayal Energy University, Gandhinagar, India
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-15T02:47:16Z
  DOI: 10.1080/15397734.2024.2377255
On the isogeometric analysis of vibration and buckling of bioinspired
composite plates using inverse hyperbolic shear deformation theory
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Raj Kiran Diwakar Singh Sunil Kumar Singh Abhishek Saini Yooseob Song Rahul Vaish a School of Mechanical; Environmental Engineering, The University of Alabama in Huntsville, Huntsville, AL, USA
  Pages: 1 - 38
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-13T04:10:05Z
  DOI: 10.1080/15397734.2024.2378474
Free vibration analysis of nanocomposite plate in contact with fluid using
a novel quasi-3D shear deformation theory and artificial neural network
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Vu Ngoc Viet Hoang Peng Shi Lester Toledo Ha Vu a Bach Khoa Phu Tho Technology Co.; Ltd., Ho Chi Minh City, Viet Namb School of Intelligent Manufacturing, Huanghuai University, Zhumadian, Henan, Chinac Department of Aerospace Engineering, Seoul National University, Seoul, Republic of Koread School of Information Technology, Hanoi, Vietnam
  Pages: 1 - 45
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-12T01:07:51Z
  DOI: 10.1080/15397734.2024.2373265
Development and research of diaphragm hydrolic diode for positive
displacement pumps
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Victor Evgen’evich Shcherba Sergey Kaigorodov Egor Dorofeev Evgeniy Pavlyuchenko Hydromechanics; Machines Department, Omsk State Technical University, Omsk, Russian Federation
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-11T04:04:33Z
  DOI: 10.1080/15397734.2024.2374452
Dimensional synthesis of motion generation of a planar four-bar mechanism
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wenrui Liu Xiankun Qu Bo Li Tao Qin Jianwei Sun a School of Mechanical Engineering; Hubei University of Arts Science, Xiangyang, Chinac School of Mechatronic Engineering, Changchun University of Technology, Changchun, Chinad XY-HUST Advanced Manufacturing Engineering Research Institute, Xiangyang, China
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-10T07:29:08Z
  DOI: 10.1080/15397734.2024.2375353
Investigating the influences of the geometry and orientation of
corrugation in the steel shear walls on the cyclic behavior through the
use of finite element analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yan Liu Yang Chen Xi Chen Sarmistha Hossain a School of Civil Engineering; Chongqing Vocational Institute of Engineering, Chongqing, Chinab Zhuzhijian Technology (Chongqing) Co., Ltd., Chongqing, Chinac Chittagong University of Engineering Technology, Chittagong, Bangladeshd College of Technical Engineering, The Islamic University, Najaf, Iraq
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-10T03:46:50Z
  DOI: 10.1080/15397734.2024.2377250
Tracking of cogging stiffness using the multi-bin SDFT
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Foeke Vanbecelaere Jasper De Viaene Michael Monte Kurt Stockman a Department of Electromechanical; Systems Metal Engineering, Ghent University, Ghent, Belgiumb FlandersMake@UGent – Corelab MIRO, Ghent, Belgium
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-08T02:14:00Z
  DOI: 10.1080/15397734.2024.2374016
An analytical study of thermal environment’s effect on the free
vibration of FGM double curved FG shells
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Abderrahman Rachid Djamel Ouinas Abdelkader Lousdad Fatima Zohra Zaoui Belkacem Achour Walid Khalifa Nawaf Alnawmasi a Laboratory of Mechanics of Structures; Technology, Ibn Badis University, Mostaganem, Algeriac Civil Engineering Department, University of Ha’il, Ha’il, Kingdom of Saudi Arabia
  Pages: 1 - 37
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-08T02:10:51Z
  DOI: 10.1080/15397734.2024.2371912
Dynamic synergies in cable-driven exosuits for gait assistance
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Daniel Rodríguez-Jorge Javier Bermejo-García Ashwin Jayakumar Francisco Romero-Sánchez Rafael Agujetas a Departamento de Ingeniería Mecánica; Energética y de los Materiales, Universidad de Extremadura, Badajoz, Spainb Campus Universitario s/n, Badajoz, Extremadura, Spain
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-08T02:08:53Z
  DOI: 10.1080/15397734.2024.2374012
Electric underwater tools for sun coral management
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Andrea Piga Carboni Barbara Segal Marcelo Crivellaro Thais Gaino Arthur Sena Marques Hélio Valdevieso Catarin Luiz Appel a Underwater Technology Laboratory (LASUB); Federal University of Santa Catarina (UFSC), Joinville, Brazilb Reef System Ecology Laboratory (LABAR), Federal University of Santa Catarina (UFSC), Florianópolis, Brazil
  Pages: 1 - 12
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-08T02:02:14Z
  DOI: 10.1080/15397734.2024.2371898
Comparative analysis for optimal placement of piezoelectric actuators on
smart thin plate
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohamed A. M. Salem Mohammed Kassem Mostafa S. Amin Hassan M. Farag Ashraf Osman a Department of Civil Engineering; Military Technical College, Cairo, Egyptb Department of Aircraft Mechanics, Military Technical College, Cairo, Egypt
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-02T09:42:38Z
  DOI: 10.1080/15397734.2024.2371903
Effects of heat wave propagation and initial stress on the thermo-elastic
behavior of porous-auxetic FG circular plate with variable hybrid
foundation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ahmad Behravanrad Mohammad Jafari Faculty of Mechanical Engineering; Shahrood University of Technology, Shahrood, Iran
  Pages: 1 - 34
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-02T09:42:10Z
  DOI: 10.1080/15397734.2024.2361138
Genetic algorithm-based path planning for grain leveling robot
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Qiang Yin Shuai Liu JiaXin Gu Shaoyun Song Yonglin Zhang Gang Zhao ZhiQiang Hao a School of Mechanical Engineering; Wuhan Polytechnic University, Wuhan, Chinab Hubei Key Laboratory of Mechanical Transmission Technology, Wuhan, China
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T12:56:56Z
  DOI: 10.1080/15397734.2024.2374009
EFG meshless-ANN approach for free vibration analysis of functionally
graded material plates on elastic foundation in thermal environments
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Afsal K. P. K. Swaminathan Sachin Hirannaiah Pavan G. S. Department of Civil Engineering; National Institute of Technology Karnataka, Mangaluru, India
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T12:31:11Z
  DOI: 10.1080/15397734.2024.2371900
Theoretical characterization of the dynamics of a new planetary gearbox
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yijian Hu Guoyou Zhao Xiaozhong Du Chuanchuan Ma Leifeng Tuo Zhibing Chu a School of Mechanical Engineering; Taiyuan University of Science Technology, Taiyuan, China
  Pages: 1 - 15
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T12:24:59Z
  DOI: 10.1080/15397734.2024.2369807
Vibration responses of vertical coupling plates considering elastic
boundary and flexible joint connection using traveling wave approach
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhengfeng Bai Siyu Wang Yingqiang Deng Xinxin Zhang a Department of Mechanical Engineering; Harbin Institute of Technology, Weihai, Chinab Department of Astronautics Engineering, Harbin Institute of Technology, Harbin, China
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:57:07Z
  DOI: 10.1080/15397734.2024.2365915
Numerical analysis of an innovative solar collector utilizing bistable
composite laminates and macro fiber composite actuators
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: P. Sourav K. S. Suraj P. M. Anilkumar Natraj B. N. Rao a Structural Engineering Division; Department of Civil Engineering, Indian Institute of Technology Madras, Chennai, Indiab Institute of Structural Analysis, Leibniz Universität Hannover, Hannover, Germanyc Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, India
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:06:57Z
  DOI: 10.1080/15397734.2024.2365916
A study on static bending behavior of partially elastically supported
functionally graded plate with porous voids and prediction of deformation
through deep learning
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rajat Jain Mohammad Sikandar Azam Department of Mechanical Engineering; Indian Institute of Technology (ISM), Dhanbad, India
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:05:11Z
  DOI: 10.1080/15397734.2024.2364894
Effect of phase difference in pulsed pressure on fatigue crack propagation
life of engine heat shield
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhaolong Wang Xiang Li Fanchun Li a Naval Architecture; Ocean Engineering College, Dalian Maritime University, Dalian, Chinab Guangxi Maritime Safety Administration of People’s Republic of China, Nanning, China
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:05:03Z
  DOI: 10.1080/15397734.2024.2367119
A novel analytical solution for determining the shear behavior of the
lattice structure based on the Primitive unit cell considering the shear
and bending effect
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Amin Dadashi Gholam Hossein Rahimi Department of Mechanical Engineering; Tarbiat Modares University, Tehran, Iran
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:00:32Z
  DOI: 10.1080/15397734.2024.2364890
Vibration and buckling analysis of porous metal foam thin-walled beams
with closed section
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xuan-Bach Bui Trung-Kien Nguyen Tien-Tho Do Thuc P. Vo a Faculty of Civil Engineering; Ho Chi Minh City University of Technology Mathematical Sciences, La Trobe University, Bundoora, VIC, Australia
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:00:31Z
  DOI: 10.1080/15397734.2024.2364901
Elastokinematic design and optimization of the multi-link torsion axle –
a novel rear axle concept for BEVs
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jens Olschewski Xiangfan Fang Institue of Automotive Lightweight Design; University of Siegen, Siegen, Germany
  Pages: 1 - 32
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:00:25Z
  DOI: 10.1080/15397734.2024.2364906
Precise analysis of geometrical nonlinear mechanical behavior of shear
deformable laminated curved composite beams in local coordinates via mixed
type finite elements
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sedat Kömürcü Ali Nuri Doğruoğlu Department of Civil Engineering; Istanbul Technical University, Sariyer/Istanbul, Turkey
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T11:00:24Z
  DOI: 10.1080/15397734.2024.2362919
Loosening resistance torque usability for anti-loosening performance
assessment in frictional threaded fasteners
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xi Liu Ce Yang Lu Chen Dan Hou a School of Mechanical Engineering; Yanshan University, Qinhuangdao, Hebei, Chinab Civil Engineering Department, Binzhou University, Binzhou, Shandong, Chinac Mechanical Engineering Department, Kyushu Institute of Technology, Kitakyushu, Fukuoka, Japand School of Intelligent Vehicle Aeronautics, Harbin Huade University, Harbin, Heilongjiang, China
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T10:00:33Z
  DOI: 10.1080/15397734.2024.2364267
Buckling analysis of thin-walled laminated composite or functionally
graded sandwich I-beams using a refined beam theory
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ilies Guendouz Hamza Guenfoud Mourad Khebizi Khaled Boumezbeur Mohamed Guenfoud a Civil Engineering; Hydraulic Laboratory, University of 8 May 1945 Guelma, Guelma, Algeriab Civil engineering department, Mentouri University of Constantine, Constantine, Algeria
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-07-01T04:00:12Z
  DOI: 10.1080/15397734.2024.2363497
An investigation into the effects of profile shifts on helical gear mesh
stiffness
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ruoyi Wang Jinhai Wang Jianwei Yang Yuping He Dechen Yao a Beijing Key Laboratory of Performance Guarantee of Urban Rail Transit Vehicles; Beijing University of Civil Engineering Mechatronics Engineering, University of Ontario Institute of Technology, Oshawa, Canada
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-27T02:55:40Z
  DOI: 10.1080/15397734.2024.2369949
Mechanics based lateral stability design for a railway Electric Multiple
Unit
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Bo Wang Qing Wu Weihua Ma a State Key Laboratory of Rail Transit Vehicle system; Southwest Jiaotong University, Chengdu, Chinab Centre for Railway Engineering, Central Queensland University, Rockhampton, Australia
  Pages: 1 - 15
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-22T03:41:34Z
  DOI: 10.1080/15397734.2024.2362308
Distribution of the residual tolerable imbalance between correction plans
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Massimo Cavacece Department of Civil; Southern Lazio, Cassino (FR), Italy
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-22T03:37:25Z
  DOI: 10.1080/15397734.2024.2360686
Optimization of cutout characteristics in AISI 1045 steel plates for
high-cycle fatigue life extension
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohammad Saberian Ali Ghoddosian Ahmad Ghasemi-Ghalebahman Faculty of Mechanical Engineering; Semnan University, Semnan, Iran
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-22T03:24:58Z
  DOI: 10.1080/15397734.2024.2355595
Bending, free vibration and buckling finite element analysis of porous
functionally graded plates with various porosity distributions using an
improved FSDT
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohamed-Ouejdi Belarbi Armagan Karamanli Soufiane Benounas Ahmed Amine Daikh a Laboratoire de Recherche en Génie Civil; LRGC, Université de Biskra, Biskra, Algeriab Department of Civil Engineering, Lebanese American University, Byblos, Lebanonc Department of Engineering Soil, University Centre of Naama, Naama, Algeriae Laboratoire d’Etude des Structures et de Mécanique des Matériaux, Département de Génie Civil, Faculté des Sciences et de la Technologie, Université Mustapha Stambouli, Mascara, Algérie
  Pages: 1 - 45
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-20T04:04:04Z
  DOI: 10.1080/15397734.2024.2366530
Crashworthiness behavior of multi-cell structures reinforced with small
tubes under axial and inclined loading
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sadjad Pirmohammad Elnaz Vosoughifard Impact; Fracture Research Laboratory, Department of Mechanical Engineering, Faculty of Engineering, University of Mohaghegh Ardabili, Ardabil, Iran
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-17T07:37:37Z
  DOI: 10.1080/15397734.2024.2364888
Modeling of size dependent buckling behavior of piezoelectric sandwich
perforated nanobeams rested on elastic foundation with flexoelectricity
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Alaa A. Abdelrahman Hanaa E. Abdel-Mottaleb Abdulrahman Aljabri Essam R. I. Mahmoud Mohamed A. Eltaher a Mechanical Design & Production Department; Faculty of Engineering, Zagazig University, Zagazig, Egyptb Structural Engineering Department, Faculty of Engineering, Zagazig University, Zagazig, Egyptc Department of Mechanical Engineering, Islamic University of Madinah, Madinah, Saudi Arabid Mechanical Engineering Department, Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabia
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-17T07:19:46Z
  DOI: 10.1080/15397734.2024.2365918
Free vibration analysis of tall buildings using a generalized continuous
model: simplified approach to soil-structure interaction
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mao Cristian Pinto-Cruz a Department of Civil; Environmental Engineering, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazilb Department of Civil Engineering, National University of Engineering, Lima, Peru
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-17T06:32:25Z
  DOI: 10.1080/15397734.2024.2348752
Dynamic stability of the Mindlin-Reissner plate using a time-modulated
axial force
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nasser Firouzi Fadi Dohnal a Institute of Structural Mechanics; Bauhaus-University Weimar, Weimar, Germanyb Research Center for Microtechnology, Vorarlberg University of Applied Sciences, Dornbirn, Austria
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-14T04:30:45Z
  DOI: 10.1080/15397734.2024.2366531
Complex modal optimization of the disk brake based on
thermal–structural coupling
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Meisheng Yang Wen Jiang Jiahan Bao Changwei Zhang a Anhui Province Key Laboratory of Special Heavy Load Robot; Anhui University of Technology, Maanshan, Chinab Key Laboratory of Hydraulic Waterway Engineering of the Ministry of Education, Chongqing Jiaotong University, Chongqing, Chinac Jiangsu Key Laboratory of Green Process Equipment, Changzhou University, Changzhou, Chinad School of Mechanical Engineering, Anhui University of Technology, Maanshan, Chinae Engineering Technology Research Center of Hydraulic Vibration Technology, Anhui University of Technology, Maanshan, China
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-12T03:29:00Z
  DOI: 10.1080/15397734.2024.2356064
Nonlinear vibration of five-layered functionally graded piezoelectric
semiconductor nano-plate on Pasternak foundation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xue-Qian Fang Yi-Hao Zou Qi-Lin He a School of Environment; Emergency Technologies for Urban Lifeline Engineering, Dongguan University of Technology, Dongguan, Chinac Department of Engineering Mechanics, Shijiazhuang Tiedao University, Shijiazhuang, China
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-11T02:23:30Z
  DOI: 10.1080/15397734.2024.2362913
Non-linear primary resonance analysis of stiffened FGM conical panels
resting on viscoelastic foundation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Vahid Eslamdoust Habib Ahmadi Hamid Aris Faculty of Mechanical Engineering; Shahrood University of Technology, Shahrood, Iran
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-10T01:50:38Z
  DOI: 10.1080/15397734.2024.2356718
Dynamic behavior of different kinds of rack vehicles
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhaowei Chen Mi’ao Yuan Shihui Li Zhihui Chen Jizhong Yang a School of Mechanotronics; Technology Research Institute, China Railway Eryuan Engineering Group Co. Ltd, Chengdu, China
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-10T01:49:01Z
  DOI: 10.1080/15397734.2024.2359520
Static and dynamic stiffness optimization on the body structure of an
electric quadricycle
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Seyed Amirhossein Ahmadi Abolfazl Khalkhali Mohammadreza Mohammadi Mohammad Abasi Automotive Simulation; Technology, Tehran, Iran
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-10T01:39:09Z
  DOI: 10.1080/15397734.2024.2353325
Collocated and non-collocated active spatial absorbers for spatial
flexible structures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Petr Beneš Jan Gregor Wim Michiels Tomáš Vyhlídal Zbyněk Šika a Department of Mechanics; Biomechanics Control Engineering, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czechia
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-07T05:39:02Z
  DOI: 10.1080/15397734.2024.2361140
Development and experimental evaluation of an instrumented constant-force
bodybuilding machine. Application to the bench press exercise
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Silvia Sánchez-Salinas Javier López-Martínez Juan Martínez-Lao Daniel García-Vallejo José M. Muyor a Department of Engineering; University of Almería, Almería, Spainb Department of Mechanical Engineering Manufacturing, Universidad de Sevilla, Sevilla, Spainc Department of Education, Health Research Centre, University of Almería, Almería, Spain
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-07T05:33:42Z
  DOI: 10.1080/15397734.2024.2361130
Damage analysis of functionally graded materials: A finite element
investigation utilizing the Gurson–Tvergaard–Needleman (GTN) model for
notched plates
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Amir Slamene Mohamed Mokhtari Billel Hamza Sadek Gouasmi Fatna Telli Abderraouf Ousidhoum Laboratory LaRTFM; Department of Mechanical Engineering, National Polytechnic School of Oran Maurice Audin, Oran, Algeria
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-06T02:32:47Z
  DOI: 10.1080/15397734.2024.2353896
Optimizing plastic shredder rotor design through structural finite element
analysis: A comprehensive approach using experimental design and response
surface methodology
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ahmed Trad Nasreddine Amoura Abdellah Abdellah Elhadj Hocine Kebir a Laboratory of Mechanics; Physics, Mathematical Modelling, University of Medea, Médéa, Algeriab Roberval Laboratory, University of Technology of Compiegne, (UMR 7337), Compiègne, France
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-04T03:32:03Z
  DOI: 10.1080/15397734.2024.2360680
Static and dynamic buckling analysis of two-layer shells include auxetic
honeycomb core combined with laminated three-phase polymer/GNP/fiber
surface resting on Kerr elastic medium in hygro-thermal environments
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nguyen Thi Hong Faculty of Mechanical Engineering; Thuyloi University, Hanoi, Vietnam
  Pages: 1 - 38
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-04T03:21:19Z
  DOI: 10.1080/15397734.2024.2360140
A recursive trapezoid-based algorithm designed to compute the strength-
and stiffness-related geometric properties of beams with polygonal
cross-sections
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Marius Nicolae Baba Department of Mechanical Engineering; Faculty of Mechanical Engineering, Transilvania University of Brașov, Brașov, Romania
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-06-04T03:15:29Z
  DOI: 10.1080/15397734.2024.2353324
Repair of damaged composite materials after patching experimental
investigation of influencing factors
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Şükrü Çetinkaya Haşim Pıhtılı a Department of Mechanical Engineering; Dicle University, Engineering Faculty, Diyarbakır, Turkeyb Department of Mechanical Engineering, Firat University, Engineering Faculty, Elazığ, Turkey
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-31T11:44:52Z
  DOI: 10.1080/15397734.2024.2359523
Design and kinematic analysis of a deployable mechanism for soft sheets
grasping
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lihong Zhu Jiamin Tan Dong Zhang Liangcheng Zhao Can Cui Ping Zhao School of Mechanical Design; Theory, Hefei University of Technology, Hefei, China
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-30T12:43:41Z
  DOI: 10.1080/15397734.2024.2357757
Flexural wave propagation characteristics of advanced nanocomposites
reinforced sandwich structure via 3D-flexibility-deep neural networks
approaches
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiaohua Yang Lijian Jiang Feng Long Emad Abouel Nasr a Lishui Vocational & Technical College; Lishui, Chinab Lishui University, Lishui, Chinac Industrial Engineering Department, College of Engineering, King Saud University, Riyadh, Saudi Arabia
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-30T12:39:57Z
  DOI: 10.1080/15397734.2024.2357261
Free vibration analysis of bio-inspired double- and cross-helicoidal
laminated composite plates
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Aman Garg Li Li Anshu Sharma a State Key Laboratory of Digital Manufacturing Equipment; Technology, Wuhan, Chinab Department of Multidisciplinary Engineering, The NorthCap University, Gurugram, Haryana, Indiac Department of Chemical Engineering, Kangwon National University, Gangwon-Do, Republic of Korea
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-30T03:37:06Z
  DOI: 10.1080/15397734.2024.2357755
Experimental investigation of effect of different configurations of
semi-circular or half-round ribs on heat transfer enhancement in a
rectangular duct
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Swapnil Thikane Suresh Mashyal a Department of Mechanical Engineering; Sanjay Ghodawat Institute, Atigre, Indiab Department of Mechanical Engineering, Visvesvaraya Technological University, Belagavi, Indiac Department of Mechanical Engineering, Maratha Mandals Engineering College, Belgavi, India
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-29T01:52:03Z
  DOI: 10.1080/15397734.2024.2358193
Influence of thermo-mechanical loads on variable stiffness composite
beams: a comprehensive study using semi-analytical and finite element
approaches
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Satyajeet Dash Tanish Dey Debarati Hati a Department of Civil Engineering; Indian Institute of Technology (ISM), Dhanbad, Indiab Department of Civil Engineering, National Institute of Technology Agartala, Jirania, India
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-29T01:16:43Z
  DOI: 10.1080/15397734.2024.2357259
Investigation of moving load-induced vibrations in layered functionally
graded Terfenol-D beams: a differential quadrature method and analytical
approach
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mukund A. PatilSuvarna SarafRavikiran KadoliSusmita Naskara Department of Mechanical Engineering; G. H. Raisoni Institute of Engineering Physical Sciences, University of Southampton, Southampton, UK
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-23T07:20:33Z
  DOI: 10.1080/15397734.2024.2354525
Static and dynamic analysis of a new offshore wind turbine system
supported with outriggers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Omar El GendyMohamed A. MohamedienEzzaat Sallama Department of Civil Engineering; Suez Canal University, Ismailia, Egyptb Department of Civil Engineering, Port Said University, Port Said, Egypt
  Pages: 1 - 33
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-23T07:04:31Z
  DOI: 10.1080/15397734.2024.2356062
Thermal buckling analysis of a new type of rectangular FG sandwich plates
using a new higher-order shear deformation theory
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hachemi BelarbiBelhadj BouchamLaboratory of Mechanics of Structures; Solids (LMSS), University of Sidi Bel Abbes, Sidi Bel Abbes, Algeria
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-23T06:49:52Z
  DOI: 10.1080/15397734.2024.2353322
Application of nonlinear energy sink for vibration suppression of mine
boring machines
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chun Gaoa China Coal Technology & Engineering Group Taiyuan Research Institute Co; Ltd, Taiyuan, Shanxi, PR Chinab Shanxi Tiandi Coal Mining Machinery Co, Ltd, Taiyuan, Shanxi, PR China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-23T06:45:01Z
  DOI: 10.1080/15397734.2024.2351988
Orthotropic failure criteria based on machine learning and
micro-mechanical matrix adapting coefficient
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nabi Mehri KhansariHamed Danandeh HesarShahab Zare Hosseinabadia Faculty of Mechanical Engineering; Sahand University of Technology, Tabriz, Iranb Faculty of Biomechanical Engineering, Sahand University of Technology, Tabriz, Iranc Faculty of New Sciences Technologies, University of Tehran, Tehran, Iran
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-23T01:40:01Z
  DOI: 10.1080/15397734.2024.2351982
Inverse kinematics analysis of a wrist rehabilitation robot using
artificial neural network and adaptive Neuro-Fuzzy inference system
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Behzad SaeediMajid Mohammadi MoghaddamMajid SadedelDepartment of Mechanical Engineering; Tarbiat Modares University, Tehran, Iran
  Pages: 1 - 49
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-22T02:22:01Z
  DOI: 10.1080/15397734.2024.2356066
Packaging machine vibration reduction by dynamic balancing
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Asensio MikelMartínez FélixCabello MarioLópez-Lombardero MarioCenitagoya AitorManterola JulenMelendez MartaIkerlan Technological Research Center; Arrasate, Spain
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-22T01:31:26Z
  DOI: 10.1080/15397734.2024.2356065
An innovative formulation for predicting the punching shear behavior in
two-way reinforced concrete slabs
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nader M. OkashaMasoomeh MirrashidHosein NaderpourTan. N. NguyenAbdel Kareem Alzo’ubiMahmoud Alneasana College of Engineering; Abu Dhabi University, Al Ain, UAEb Department of Civil Engineering, Toronto Metropolitan University, Toronto, Canadac Department of Civil Engineering, Semnan University, Semnan, Irand Department of Architectural Engineering, Sejong University, Seoul, South Koreae Department of Civil Engineering, Tishreen University, Latakia, Syria
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-22T01:27:50Z
  DOI: 10.1080/15397734.2024.2355594
Nonlinear dynamic analysis of a spring coupled double beam based
piezoelectric energy harvester under parametric base excitation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ranit RoySantosha Kumar DwivedyDepartment of Mechanical Engineering; Indian Institute of Technology Guwahati, Guwahati, Assam, India
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-21T03:47:23Z
  DOI: 10.1080/15397734.2024.2356725
Analytical modeling and simulations of dynamic mode-III fracture in
pre-stressed dry sandy elastic continuum
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ram Prasad YadavRenu Santan Kumara Department of Mathematics; SRM University Sonepat, Sonepat, Haryana, Indiab Department of Mathematics, B.N. Mandal University (R.J.M. College) Madhepura, Madhepura, Bihar, Indiac Department of Mathematics, National Institute of Technology Silchar, Silchar, Assam, India
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-21T03:44:19Z
  DOI: 10.1080/15397734.2024.2354931
On the vibration responses of orthotropic laminated cylindrical panels
with non-uniform porosity distributions using higher-order shear
deformation theory
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Furkan Can BahadırFerruh TuranFaculty of Engineering; Ondokuz Mayis University, Samsun, Turkey
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-21T02:02:35Z
  DOI: 10.1080/15397734.2024.2352585
Load characteristics of screen panels in vibrating flip-flow screens
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhihong ZhangJian TangXiaoyan XiongCollege of Mechanical; Vehicle Engineering, Taiyuan University of Technology, Taiyuan, China
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-20T03:23:36Z
  DOI: 10.1080/15397734.2024.2355596
Vibration behavior prediction of submerged nanobeams with axially
traveling supports: numerical, analytical, and machine learning approaches
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiaolan ChenSchool of Electromechanical Engineering; Intelligent Manufacturing, Huanggang Normal University, Huanggang, Hubei, China
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-20T03:20:35Z
  DOI: 10.1080/15397734.2024.2354530
Nonlinear vibration analysis of geometrically imperfect FGM Timoshenko
beams with porosity and elastically restrained ends in thermal
environments
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: N. D. AnhNguyen Van ThinhHoang Van Tunga Institute of Mechanics; Vietnam Academy of Science Technology, Ha Noi, Viet Name Faculty of Civil Engineering, Hanoi Architectural University, Ha Noi, Viet Nam
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-20T03:18:37Z
  DOI: 10.1080/15397734.2024.2353876
Design and development of a not actively driven modular device for parts
feeding and sorting
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Edoardo BianchiOliver Jonas JorgGualtiero FantoniFrancisco Javier Brosed DuesoJosé A. Yagüe-Fabraa Department of Design; Industrial Engineering, Largo Lucio Lazzarino, Pisa, Italy
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-20T03:15:12Z
  DOI: 10.1080/15397734.2024.2353326
Design of multi-topology lattice structures based on a high-quality unit
cell library
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hamza Sulayman AbdullahiShurong ZhuoDongying FuShuming Gaoa State Key Lab of CAD & CG; Zhejiang University, Hangzhou, Zhejiang, People’s Republic of Chinab Department of Mechanical Engineering, Bayero University, Kano, Nigeria
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-20T03:13:37Z
  DOI: 10.1080/15397734.2024.2353323
Dynamic characteristics analysis of multi-link mechanism with clearances
considering uncertain parameters
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xiulong ChenErlei YaoCollege of Mechanical; Technology, Qingdao, China
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-20T03:08:22Z
  DOI: 10.1080/15397734.2024.2351984
Semi-analytical modeling and vibration analysis of bolted frame structure
under non-uniform pretension
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wei SunYancheng ChenXiaofeng LiuDongxu DuYu Zhanga School of Mechanical Engineering; Control of Aero-Propulsion Systems Ministry of Education of China, Northeastern University, Shenyang, Chinac Shenyang Aerospace Xinguang Group Co. Ltd., Shenyang, China
  Pages: 1 - 55
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-17T08:37:52Z
  DOI: 10.1080/15397734.2024.2353899
Nonlocal quasi-3d vibration/ analysis of three-layer nanoplate surrounded
by Orthotropic Visco-Pasternak foundation by considering surface effects
and neutral surface concept
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Amir Hossein Soltan AraniAli Ghorbanpour AraniZahra Khoddami Maraghia Department of Solid Mechanics; Faculty of Mechanical Engineering, University of Kashan, Kashan, Iranb Institute of Nanoscience & Nanotechnology, University of Kashan, Kashan, Iranc Faculty of Engineering, Mahallat Institute of Higher Education, Mahallat, Iran
  Pages: 1 - 36
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-17T08:15:37Z
  DOI: 10.1080/15397734.2024.2348103
Delamination and crack detection and localization of a laminated composite
plate structure using regression and regression-based neural network
methods
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Majid GhazaliMorteza Karamooz MahdiabadiDepartment of Mechanical Engineering; Tarbiat Modares University, Tehran, Iran
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-17T08:08:32Z
  DOI: 10.1080/15397734.2024.2347504
Modification of wavelet-based downsampling method to reduce computational
error in nonlinear dynamic analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Noorollah MajidiHossein Tajmir RiahiSayed Mahdi ZandiDepartment of Civil Engineering; University of Isfahan, Isfahan, Iran
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-17T08:03:51Z
  DOI: 10.1080/15397734.2024.2345764
Design, simulation, and additive manufacturing performance of three
lightweight FBG acceleration sensors
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yuan ZhangHua GaoLiang ZhangXiaohu Liua Department of Mechanics; Huazhong University of Science Technology, Wuhan, Chinab Nuclear Power Plant Machine Assembly Process Room, China National Erzhong Group Co, Deyang, China
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-16T06:35:42Z
  DOI: 10.1080/15397734.2024.2351983
Nonlinear dynamics and forced vibrations of simply-supported fractional
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Salwa A. MohamedMohamed A. EltaherNazira Mohamed Rasha M. Abo-bakra Engineering Mathematics Dept.; Faculty of Engineering, Zagazig University, Zagazig, Egyptb Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabiac Mechanical Design Production Dept., Faculty of Engineering, Zagazig University, Zagazig, Egyptd Mathematics Dept., Faculty of Science, Zagazig University, Zagazig, Egypt
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-16T05:51:33Z
  DOI: 10.1080/15397734.2024.2353321
Free vibration behavior in functionally graded material plates with dual
efficient quadrilateral finite elements
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Debarupam GogoiMihir Kumar PanditArun Kumar PradhanIndian Institute of Technology; Bhubaneswar, India
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-14T03:04:08Z
  DOI: 10.1080/15397734.2024.2348104
Fuzzy sliding mode control of automotive semi-active suspension based on
optimization convergence law
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wei WangJinzhuang XuJiqiang ZhengHeng ZhaoAutomotive; Transportation Engineering, Jiangsu University of Technology, Jiangsu, China
  Pages: 1 - 14
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-10T11:41:37Z
  DOI: 10.1080/15397734.2024.2349926
Analysis of steady-state dynamics and stability of particle dampers
considering the friction effect
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zheng LuJiawei ZhangMengyao ZhouHengrui Zhanga Department of Disaster Mitigation for Structures; Tongji University, Shanghai, Chinab State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, Shanghai, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-10T08:00:15Z
  DOI: 10.1080/15397734.2024.2346605
Energy loss comparison between kinematically equivalent mechanisms:
Slider-crank and eccentric cam
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pau CatalàJoaquim Maria VecianaLluïsa Jordia Department of Mechanical Engineering; Universitat Politècnica de Catalunya, EPSEM, Manresa, Spainb Department of Mechanical Engineering, Universitat Politècnica de Catalunya, ETSEIB, Barcelona, Spain
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-08T11:52:26Z
  DOI: 10.1080/15397734.2024.2345771
Investigating mechanical properties and bending behavior of an auxetic
plate with 4-star unit cell
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mehdi RajabianMohammad FadaeeJaafar GhanbariDepartment of Mechanical Engineering; Qom University of Technology, Qom, Iran
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-07T12:21:02Z
  DOI: 10.1080/15397734.2024.2345762
Productivity improvement of control cable manufacturing machine for the
automotive industry
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: P. M. S. RamalhoR. D. S. G. CampilhoF. J. G. SilvaA. F. V. PedrosoR. C. M. Sales-Continia CIDEM; ISEP – School of Engineering, Polytechnic of Porto, Porto, Portugalb INEGI – Pólo FEUP, Porto, Portugalc Technological College of São José dos Campos, São José dos Campos, Brazil
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-07T04:51:31Z
  DOI: 10.1080/15397734.2024.2349903
Meshing principle and numerical study of classic conic worm drive
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Xinyue ZhuYaping ZhaoLi Liua Zhejiang Provincial Engineering Center of Integrated Manufacturing Technology; Reliability of Mechanical Equipment, Northeastern University, Shenyang, China
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-03T08:39:08Z
  DOI: 10.1080/15397734.2024.2348751
Study of dynamic performance and adaptive control of the variable
stiffness actuator with time-varying parameters
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zemin YangXiaopeng LiDan SunRenzhen ChenWenfeng Xua Key Laboratory of Aircraft Test; Automation, Northeastern University, Shenyang, PR China
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-03T08:20:35Z
  DOI: 10.1080/15397734.2024.2348750
Vibration assessment of dual core sandwich beam with a biomimetic lamellar
honeycomb core and MWCNT reinforced facesheets
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Narayanan ThanikasalamManoharan RamamoorthySchool of Mechanical Engineering; Vellore Institute of Technology, Vellore, India
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-05-02T02:37:12Z
  DOI: 10.1080/15397734.2024.2345766
Rigidization analysis of SMA-based inflatable toroidal space structures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Vikas RastogiSanjay H. UpadhyayKripa Sankar Singha Mechanical; Structures Laboratory, IIT Roorkee, Haridwar, Uttarakhand, Indiab Space Application Center (SAC), ISRO, Ahmadabad, India
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-27T03:22:52Z
  DOI: 10.1080/15397734.2024.2345375
Lifespan increase of electrical terminal crimping punches for the
automotive industry
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: R. D. S. G. CampilhoH. M. B. LemosF. J. G. SilvaR. P. MartinhoA. F. V. Pedrosoa CIDEM; ISEP – School of Engineering, Polytechnic of Porto, Porto, Portugalb INEGI – Pólo FEUP, Porto, Portugal
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-24T07:14:07Z
  DOI: 10.1080/15397734.2024.2345368
Stability of composite plates integrated with graphene-reinforced
piezoelectric layers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Qiang ZuoLonglong LengQilin Jina Institute of Advanced Technology; Zhejiang University, Hangzhou, Zhejiang, Chinab School of Engineering, Hangzhou City University, Hangzhou, Zhejiang, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-23T02:40:49Z
  DOI: 10.1080/15397734.2024.2339525
Transient analysis of bio-inspired shear and normal deformable laminated
composite plates using a higher-order finite element model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Armagan KaramanliThuc P. VoMohamed A. Eltahera Faculty of Engineering; Production Department, Faculty of Engineering, Zagazig University, Zagazig, Egypt
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-19T03:52:27Z
  DOI: 10.1080/15397734.2024.2341819
A packing problem approach to grasping with a two-finger gripper with
application in forest harvesting
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yesid A. CaicedoLuciano E. ChiangDepartment of Mechanical; Metallurgical Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-19T03:49:00Z
  DOI: 10.1080/15397734.2024.2339527
Design and analysis of a novel 3-DOF planar parallel manipulator with two
kinematic chains
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Shulin WuXiaoyong WuCongzhe WangJie WangJie Zhoua School of Mechanical Engineering; Chongqing University of Technology, Chongqing, Chinab The State Key Laboratory of Mechanical Transmissions, Chongqing University, Chongqing, Chinac School of Advanced Manufacturing Engineering, Chongqing University of Posts Telecommunications, Chongqing, China
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-18T05:21:08Z
  DOI: 10.1080/15397734.2024.2337915
Nonlinear vibration characteristics of an aeroengine cantilever flexible
rotor considering interference fit and unbalance
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Shuo HanHao ZhangQingyu ZhuXiangyu MengQingkai Hana School of Mechanical Engineering; Control of Aero-Propulsion Systems Ministry of Education of China, Northeastern University, Shenyang, PR Chinac College of Mechanical Engineering, Liaoning University of Technology, Jinzhou, Chinad Department of Mechanical Engineering, Tsinghua University, Beijing, China
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-17T04:29:00Z
  DOI: 10.1080/15397734.2024.2341822
Nonlocal strain gradient-based dynamic stability of functionally graded
piezoelectric nanoshells considering thermo-electro-mechanical coupling
effects
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Fei ZhangChun Yu BaiDong Yu CaoJi Zhen WangHang Xua National Key Laboratory of Strength; Technology on Structures Impact Dynamics, Xi’an, Chinad School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-16T06:06:30Z
  DOI: 10.1080/15397734.2024.2341809
Effect of variable amplitude superimposed wave on piezoelectric actuator
performance and experimental performance analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhiwei WuChaofeng LiJinghu TangYing LiBinbin Zhua School of Mechanical Engineering; Control of Aero-propulsion Systems, Northeastern University, Shenyang, Peoples Republic of China
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-15T08:53:06Z
  DOI: 10.1080/15397734.2024.2341818
Friction behavior of 3D printed flexible cavity structure at low-speed
condition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chenxiao LiKwang-Hee LeeYihe ZhangLi RuiChul-Hee Leea Department of Mechanical Engineering; Inha University, Incheon, South Koreab School of Automation, Chongqing University of Posts Telecommunications, Chongqing, China
  Pages: 1 - 14
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-11T03:26:12Z
  DOI: 10.1080/15397734.2024.2338872
Accurate free and forced vibration behavior prediction of functionally
graded sandwich beams with variable cross-section: A finite element
assessment
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zakaria BelabedAbdeldjebbar TounsiAbdelmoumen Anis BousahlaAbdelouahed TounsiMurat Yaylacıa Civil Engineering Department; Material Environmental Engineering, Lebanese American University, Byblos, Lebanong Department of Civil Engineering, Recep Tayyip Erdogan University, Rize, Turkeyh Faculty of Turgut Kıran Maritime, Recep Tayyip Erdogan University, Rize, Turkeyi Murat Yaylacı-Luzeri R&D Engineering Company, Rize, Turkey
  Pages: 1 - 34
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-10T11:16:48Z
  DOI: 10.1080/15397734.2024.2337914
Vibrational response of a sandwich microplate considering the impact of
flexoelectricity and based on a novel porous-FGM formulation
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ali KavehHossein BabaeiSaeid ZavariEhsan ArshidÖmer Civaleka Department of Mechanical; Development Center, LIPS Research Foundation, European International University, Paris, Franced Civil Engineering Dept. Antalya, Akdeniz University, Antalya, Turkeye China Medical University, Taichung, Taiwan
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-10T11:15:42Z
  DOI: 10.1080/15397734.2024.2337913
Consideration of surface roughness during the design of internal
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Domen ŠerugaMartijn WolbersJernej KlemencMarko NagodeSimon Omana Faculty of Mechanical Engineering; University of Ljubljana, Ljubljana, Sloveniab Bond3D International BV, Enschede, The Netherlands
  Pages: 1 - 14
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-10T11:13:48Z
  DOI: 10.1080/15397734.2024.2337306
External and internal resonances of thin-walled curved beams under
three-directional moving harmonic loads
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Haijun ChenYong CaiXiaoyong Lva School of Civil Engineering; Central South University, Changsha, Chinab School of Civil Engineering, Central South University of Forestry Technology, Changsha, China
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-10T11:10:51Z
  DOI: 10.1080/15397734.2024.2336155
On the free vibration characteristics of multiscale hybrid conical panels
utilizing Chebyshev–Ritz route
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ali SalmanizadehReza NopourMohammad Mohammadi AghdamYaser KianiMohammad Reza Eslamia Mechanical Engineering Department; Amirkabir University of Technology, Tehran, Iranb Faculty of Engineering, Shahrekord University, Shahrekord, Iranc Nanotechnology Research Institute, Shahrekord University, Shahrekord, Iran
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-08T02:14:19Z
  DOI: 10.1080/15397734.2024.2335209
Active vibration control of rotating smart bidirectional FGPTC subjected
to internal mechanical shock
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhiwei WuDepartment of Mechanical; Electrical Engineering, Shanxi Institute of Energy, Jinzhong, PR China
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-05T11:54:03Z
  DOI: 10.1080/15397734.2024.2335203
Parametric investigation on behaviors of eccentric RC exterior and
interior beam-column subassemblies
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mostafa A. Abdel-LatifEslam M. SolimanWojciech SumelkaMohamed M. MohamedAly G. Abd El-ShafiAmr A. Nassra Department of Civil Engineering; Assiut University, Assiut, Egyptb Faculty of Civil Environmental Engineering, Poznan University of Technology, Poznan, Polandc Department of Civil Engineering, Ajman University, Ajman, UAEd Faculty of Engineering, Assiut University, Assiut, Egypt
  Pages: 1 - 43
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-04T04:11:24Z
  DOI: 10.1080/15397734.2024.2332641
An experimental study on the bending fatigue behavior of concrete beams by
a proposed machine
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mahnoosh HaghighiPayam AsadiHamid HashemolhosseiniAlireza Baghbanana Department of Civil Engineering; Isfahan University of Technology, Isfahan, Iranb Department of Mining Engineering, Isfahan University of Technology, Isfahan, Iran
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-03T08:10:47Z
  DOI: 10.1080/15397734.2024.2335214
Capacity evaluation of composites with new materials based on design
equations for concrete and masonry walls
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Nima AminpourAli Memaria Department of Architectural Engineering; The Pennsylvania State University, University Park, PA, USAb Department of Architectural Engineering, Department of Civil Environmental Engineering, The Pennsylvania State University, University Park, PA, USA
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-01T12:34:30Z
  DOI: 10.1080/15397734.2024.2335204
Transient in-plane analysis of cracked general orthotropic planes
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: J. SadeghiJ. P. VafaS. J. FariborzDepartment of Mechanical Engineering; Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
  Pages: 1 - 32
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-01T11:28:28Z
  DOI: 10.1080/15397734.2024.2331558
Experimental-numerical analyses on energy harvesting characteristics of
non-conventional T-shaped beams with varied piezoelectric patch location
and anchor position
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Dauda Sh. IbrahimXing ShenUmair JavaidUmer SharifOrelaja Oluseyi Adewalea State Key Laboratory of Mechanics; Astronautics, Nanjing, Chinad School of Civil Engineering, Guangzhou University, Guangzhou, Chinae Department of Mechanical Engineering, Moshood Abiola Polytechnic, Abeokuta, Nigeria
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-04-01T11:09:25Z
  DOI: 10.1080/15397734.2024.2330652
Multi-factors effects analysis of nonlinear vibration of FG-GNPRC membrane
using machine learning
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhi NiJinlong YangYucheng FanZiyan HangBowen ZengChuang FengCollege of Civil Engineering; Nanjing Tech University, Nanjing, China
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-27T01:55:38Z
  DOI: 10.1080/15397734.2024.2332642
Damage evolution of foam aluminum sandwich panel under three-point bending
load by micro-CT
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Juan LiZiteng XueGuanghui ZhaoHuaying LiLifeng MaYugui Lia Engineering Research Center Heavy Machinery Ministry of Education; Taiyuan University of Science Technology Institute, Linfen, PR China
  Pages: 1 - 13
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-26T12:20:53Z
  DOI: 10.1080/15397734.2024.2331557
Correction
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Pages: 1 - 1
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-26T02:13:56Z
  DOI: 10.1080/15397734.2024.2334099
Research on influence mechanism of prefabricated hole on life extension of
compressor impeller
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Anbang QuFanchun LiNaval Architecture; Ocean Engineering College, Dalian Maritime University, Dalian, Liaoning, China
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-26T02:09:00Z
  DOI: 10.1080/15397734.2024.2332635
Improved mesh stiffness model of spur gear considering spalling defect
influenced by surface roughness under EHL condition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Huifang XiaoFan ZhangJinshan GaoZedong LiSchool of Mechanical Engineering; University of Science Technology Beijing, Beijing, PR China
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-22T06:42:48Z
  DOI: 10.1080/15397734.2024.2330653
Nonlinear postbuckling and snap-through instability of movable simply
supported BDFG porous plates rested on elastic foundations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: S. A. MohamedA. E. AssieM. A. EltaherR. M. Abo-bakrN. Mohameda Engineering Mathematics Department; Faculty of Engineering, Zagazig University, Zagazig, Egyptb Mechanical Engineering Department, Faculty of Engineering, Jazan University, Jazan, Kingdom of Saudi Arabiac Mechanical Engineering Department, Faculty of Engineering, King Abdulaziz University, Jeddah, Saudi Arabiad Mechanical Design Production Department, Faculty of Engineering, Zagazig University, Zagazig, Egypte Mathematical Department, Faculty of Science, Zagazig University, Zagazig, Egypt
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-22T06:39:38Z
  DOI: 10.1080/15397734.2024.2328339
Exploring the vibration and energy absorption characteristic of auxetic
tubular structure: an experimental analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Adrien NoelRafael Augusto GomesLucas Antonio de OliveiraSebastião Simões da CunhaGuilherme Ferreira Gomesa Département des Sciences et Technologies; Haute École Condorcet, Tournai, Belgiumb Mechanical Engineering Institute, Federal University of Itajubá, Itajubá, Brazil
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-20T12:35:55Z
  DOI: 10.1080/15397734.2024.2329692
Research on numerical solution of statically indeterminate problem of
steering tool combined bearing
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhou ZhanShi LeiNie XingyueShao XueLiang JinliFeng Dinga School of Mechanical Engineering; Yangtze University Hubei, Chinab Hubei Engineering Research Center of Oil Completion Tools Jing zhou, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-18T06:44:13Z
  DOI: 10.1080/15397734.2024.2326597
Torsional vibration behavior of a restrained non-circular nanowire in an
elastic matrix
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Büşra UzunUğur KafkasMustafa Özgür YaylıGökhan Güçlüa Engineering Faculty; Department of Civil Engineering, Bursa Uludag University, Bursa, Turkeyb Engineering Faculty, Department of Civil Engineering, Kütahya Dumlupınar University, Kütahya, Turkey
  Pages: 1 - 33
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-18T06:38:16Z
  DOI: 10.1080/15397734.2024.2317440
Experimental and numerical investigation of strengthening effect of shear
studs in RC flat slabs with multiple openings
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ömer MercimekRahim GhoroubiYaşar ErbaşÖzgür AnılAnıl ÖzdemirAbdullah TürerYağmur KopramanTogay OzbakkalogluSercan Tuna Akkayaa Civil Engineering Department; Ankara University, Ankara, Türkiyeb Civil Environmental Engineering, University of California, Davis, Davis, CA, USAc Civil Engineering Department, Bartın University, Bartın, Türkiyed Civil Engineering Department, Gazi University, Ankara, Türkiyee Departmet of Engineering Science, University of Oxford, Oxford, UKf Civil Engineering Department, Ankara Yıldırım Beyazıt University, Ankara, Türkiyeg Ingram School of Engineering, Texas State University, San Marcos, TX, USA
  Pages: 1 - 34
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-14T07:02:25Z
  DOI: 10.1080/15397734.2024.2327531
Effect of porosity on the nonlinear free vibrational behavior of
two-directional functionally graded porous cone-shaped shells resting on
elastic substrates
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hamed YouseftabarFarhad HosseinnejadYasser RostamiyanSeyyed Masoud SeyyediMohsen Rabbania Department of Mechanical Engineering; Aliabad Katoul Branch, Islamic Azad University, Aliabad Katoul, Iranb Department of Mechanical Engineering, Sari Branch, Islamic Azad University, Sari, Iranc Department of Applied Mathematics, Sari Branch, Islamic Azad University, Sari, Iran
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-14T06:47:20Z
  DOI: 10.1080/15397734.2024.2323147
Nonlinear vibrations of a cantilevered conical beam with axially
functionally graded material carrying a longitudinally loaded mass
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Reza MoalefshahriDepartment of Mechanical Engineering; Hakim Sabzevari University, Sabzevar, Iran
  Pages: 1 - 11
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-14T06:47:15Z
  DOI: 10.1080/15397734.2024.2328337
The analysis of pressurized FGM cylinders with arbitrarily varying
material properties using strain based approach
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Asma BouzeribaCherif Bouzriraa Department of Science; Technology, Mohammed Seddik Ben Yahia University, Jijel, Algeria
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-13T10:05:46Z
  DOI: 10.1080/15397734.2024.2318737
Prediction of bridge structure deformation and strain based on dynamic
testing and intelligent algorithms
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pengzhen LuDengguo LiYing WuYangrui ChenYu Dinga Zhejiang University of Technology; Hangzhou, Chinab Jiaxing Nanhu University, Jiaxing, Zhejiang Province, China
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-12T02:39:05Z
  DOI: 10.1080/15397734.2024.2324354
Experimental and numerical investigation on novel three-dimensional
printed bio-inspired hexagonal lattices for energy absorption and
stiffness behavior
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ramakrishna DoodiBala Murali GunjiSMEC; Vellore Institute of Technology University, Vellore, India
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-11T10:25:26Z
  DOI: 10.1080/15397734.2024.2326609
Time-varying dynamic modeling of micro-milling considering tool wear and
the process parameter identification
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pengfei DingXianzhen HuangYuxiong Lia School of Mechanical Engineering; Control of Aero-Propulsion Systems Ministry of Education of China, Northeastern University, Shenyang, PR China
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-11T10:13:56Z
  DOI: 10.1080/15397734.2024.2325108
A novel isogeometric model for dynamic buckling analysis of doubly curved
two-directional functionally graded porous shallow microshells in thermal
environments via variable length-scale parameters
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Duong Khuat DucLinh Nguyen TuanMai Dao NhuNguyen Thi HongTran Van KePhung Van Minha School of Mechanical; Automotive Engineering, Hanoi University of Industry, Hanoi, Vietnamb Institute of Mechanics, VAST, Hanoi, Vietnamc Faculty of Mechanical Engineering, Thuyloi University, Hanoi, Vietnamd Faculty of Mechanical Engineering, Le Quy Don Technical University, Hanoi, Bac Tu Liem, Vietnam
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-09T09:52:55Z
  DOI: 10.1080/15397734.2024.2323704
Exploring wave propagation and attenuation in a metamaterial bar using
dual-action vibration absorber with multifrequency resonators
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Saeed AlthamerCollege of Engineering; Mechanical Department, King Khalid University, Asir, Abha, Kingdom of Saudi Arabia
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-09T09:47:54Z
  DOI: 10.1080/15397734.2024.2320745
Numerical study of snow accumulation on bogies for long marshalling
high-speed trains
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Changlong ZhaoTiantian WangFushan ShiYu WangChen JiangGuo Zhoua Key Laboratory of Traffic Safety on Track; Ministry of Education, School of Traffic & Transportation Engineering, Central South University, Changsha, Chinab CRRC Qingdao Sifang Co., Ltd, Qingdao, Chinac College of Mechanical Vehicle Engineering, Hunan University, Changsha, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-08T03:56:58Z
  DOI: 10.1080/15397734.2024.2325667
A parameters identification method and experimental analysis of contact
friction interface in thermal environment
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yunzhao WangChaofeng LiTichang JiaShijie Pana College of Mechanical Engineering; Control of Aeronautical Power Equipment of the Ministry of Education, Northeastern University, Shenyang, Liaoning, China
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-06T04:45:54Z
  DOI: 10.1080/15397734.2024.2322659
Vibration analysis of bio-inspired sandwich composite beam under rotating
environment based on the Internet of Things technology
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Caleb Daniel RP. Edwin SudhagarSchool of Mechanical Engineering; Vellore Institute of Technology, Vellore, India
  Pages: 1 - 41
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-05T10:09:04Z
  DOI: 10.1080/15397734.2024.2323151
Grey wolf optimizer based-natural frequency optimization of laminated
composite shells carrying distributed mass
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Subham PalKanak KalitaSalil Haldara Department of Aerospace Engineering; Technology, Chennai, Tamil Nadu, India
  Pages: 1 - 35
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-04T02:12:55Z
  DOI: 10.1080/15397734.2024.2321971
Thermoelastic analysis of variable thickness truncated conical shell
subjected to thermomechanical load with internal heat generation using
perturbation technique
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hamideh SeddighiMehdi GhannadAbbas LoghmanMohammad Zamani Nejada Faculty of Mechanical Engineering; Shahrood University of Technology, Shahrud, Iranb Department of Solid Mechanic, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iranc Department of Mechanical Engineering, University of Yasooj, Yasuj, Iran
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-04T02:04:10Z
  DOI: 10.1080/15397734.2024.2315162
Stochastic FEM-based thermal buckling of SMA fiber-reinforced composite
laminated plate using polynomial chaos
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Achchhe LalAnil Kumar MahtoAnant Parghia Department of Mechanical Engineering; Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, Indiab Department of Civil Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, India
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-01T05:00:12Z
  DOI: 10.1080/15397734.2024.2318727
The nonlinear negative stiffness inertial amplifier base isolators for
dynamic systems
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sudip ChowdhuryArnab BanerjeeSondipon Adhikaria Civil Engineering Department; Indian Institute of Technology Delhi, Delhi, Indiab James Watt School of Engineering, The University of Glasgow, Glasgow, Scotland
  Pages: 1 - 40
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-03-01T05:00:07Z
  DOI: 10.1080/15397734.2024.2319113
Mechanical behavior and strong oriented design of multi-guide anti-creep
energy absorption structure at locomotive end
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Chengju QuPing XuShuguang YaoChengxing YangXihong Jina Key Laboratory of Traffic Safety on Track (Central South University) Ministry of Education, School of Traffic & Transportation Engineering, Central South University, Changsha, Chinab Joint International Research Laboratory of Key Technology for Rail Traffic Safety, Central South University, Changsha, Chinac National & Local Joint Engineering Research Center of Safety Technology for Rail Vehicle, Central South University, Changsha, Chinad State Key Laboratory of High-Performance Complex Manufacturing, Central South University, Changsha, Chinae CRRC Zhuzhou Locomotive Co; Ltd, Zhuzhou, China
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-26T03:11:47Z
  DOI: 10.1080/15397734.2024.2317444
The Casimir, Van der Waals, and electrostatic forces’ effects on the
response of magneto-electro-elastic nanosensor/switch beams under thermal
environment
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ramazan ÖzmenIsmail Esena Department of Mechatronics Engineering; Karabuk University, Karabuk, Turkeyb Department of Mechanical Engineering, Karabuk University, Karabuk, Turkey
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-26T03:08:49Z
  DOI: 10.1080/15397734.2024.2318615
Transient thermal stress analysis of a thin rotating FGM blade based on
the exact shear correction factor: a comparison of ROM and LRVE
homogenization models
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Shashank PandeyDepartment of Mechanical Engineering; National Institute of Technology Jamshedpur, Jamshedpur, India
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-26T02:56:45Z
  DOI: 10.1080/15397734.2024.2318735
A new theoretical method for torsional-flexural vibrations response of
thin-walled beams with closed cross-sections under uniform distributed
moving load
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Yong CaiXiaoyue FanXiaoyong LvHaijun Chena School of Civil Engineering; Central South University, Changsha, Chinab School of Civil Engineering, Central South University of Forestry Technology, Changsha, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-24T09:28:17Z
  DOI: 10.1080/15397734.2024.2317445
A numerical and closed-form analytical solution for the global buckling
critical load of tall buildings considering soil flexibility: A coupled
shear-flexural model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mao Cristian Pinto-Cruza Department of Civil; Environmental Engineering, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazilb Department of Civil Engineering, National University of Engineering, Lima, Peru
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-24T02:12:30Z
  DOI: 10.1080/15397734.2024.2316867
Multi-objective dimensions optimization of two-layer microsensor for
detection of the virus by using genetic algorithm
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohammadreza Davoodi YektaAbbas RahiFaculty of Mechanical; Energy Engineering, Shahid Beheshti University, Tehran, Iran
  Pages: 1 - 14
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-24T01:37:54Z
  DOI: 10.1080/15397734.2024.2319680
Design and analysis of train anti-derailment device based on full-scale
derailment tests
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Tianyu ZhuoJialin LiGuangjun GaoJian LiWeiyuan Guana The State Key Laboratory of Heavy-duty; Express High-power Electric Locomotive, Changsha, Hunan, Chinab Key Laboratory of Traffic Safety on Track of Ministry of Education, School of Traffic & Transportation Engineering, Central South University, Changsha, Chinac National & Local Joint Engineering Research Center of Safety Technology for Rail Vehicle, Changsha, China
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-23T02:07:41Z
  DOI: 10.1080/15397734.2024.2315160
Assessing the effects of interference fit assembly on gear tooth surface
deviations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Alfonso Fuentes-AznarIgnacio Gonzalez-Pereza Department of Mechanical Engineering; Rochester Institute of Technology, Rochester, NY, USAb Department of Mechanical Engineering, Materials Manufacturing, Universidad Politécnica de Cartagena, Murcia, Spain
  Pages: 1 - 15
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-22T01:55:14Z
  DOI: 10.1080/15397734.2024.2318734
Panel flutter analysis of nano-hybrid laminated composite quadrilateral
plates presuming curvilinear fibers
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jamshid FazilatiVahid KhalafiMeisam Jalalvanda Aeronautical Science; Technology, Tehran, Iranc Engineering Materials, School of Engineering, University of Southampton, Southampton, UK
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-22T01:37:21Z
  DOI: 10.1080/15397734.2024.2316870
Mesh stiffness modeling and dynamic simulation of spur gears with body
crack under speed fluctuation condition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Hanjun JiangFuhao LiuJianqiang ZhangYueyao XiaoJiahao Liu Zhiwen XuanBaogang LiXihao YangXia Konga The State Key Laboratory of Mechanical Transmissions; Chongqing University, Chongqing, Chinab School of Mechanical Automotive Engineering, Qingdao University of Technology, Qingdao, Chinac Inner Mongolia First Machinery Group Co., Ltd, Baotou, Chinad Jiangsu Tailong Decelerator Machinery Co., Ltd, Taixing, China
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-21T10:15:39Z
  DOI: 10.1080/15397734.2024.2318742
3D elasticity solutions for stress field around square hole in
functionally graded plate
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Y. L. SunD. LuY. Y. ZhangB. YangG. N. Wanga Department of Civil Engineering, Zhejiang Sci-Tech University, Hangzhou, Chinab School of Mechanical Engineering & Mechanics, Ningbo University, Ningbo, Chinac East China Architectural Design & Research Institute Co; Ltd, Shanghai, Chinad Department of Civil Engineering, Zhejiang University, Hangzhou, China
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-21T08:58:05Z
  DOI: 10.1080/15397734.2024.2316248
Topology optimization of damping layer in frequency-dependent viscoelastic
sandwich panels considering steady-state free vibration
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jie WangMingtao CuiWang LiXiaobo Wanga Research Center for Applied Mechanics, School of Mechano-electronic Engineering, Xidian University, Xi’an, Chinab Shenzhen Dajiang Innovation Technology CO; LTD, Shenzhen, Chinac Shaanxi Key Laboratory of Space Extreme Detection, Xi’an, Chinad Department of Mechanical Engineering, McGill University, Montreal, Canada
  Pages: 1 - 30
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-19T11:32:06Z
  DOI: 10.1080/15397734.2024.2315168
A comparative investigation of static and dynamic behaviors in hybrid
metal-composite and steel helical gears
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wael MasmoudiJessica NeufondGiuseppe PetroneFrancesco FrancoSergio De Rosaa Pasta-Lab; Universita degli Studi di Napoli Federico II, Napoli, Italyb Vibratec SA, Ecully, France
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-19T11:18:55Z
  DOI: 10.1080/15397734.2024.2305779
Numerical study of free vibration of laminated curved beam with
magnetostrictive patches
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: R. BayatO. RahmaniA. A. Jafaria Faculty of Mechanical Engineering; K. N. Toosi University of Technology, Tehran, Iranb Smart Structures Advanced Materials Laboratory, Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-19T04:29:14Z
  DOI: 10.1080/15397734.2024.2303658
Bending and free vibration analysis of FG circular plates using a five
unknown high order shear deformation theory
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Abdelouahab TatiAbderahim BelounarAmira Sadguia Laboratoire de Génie Energétique et matériaux; Biskra University, Biskra, Algeriab Department of Civil Engineering, University Center of Tipaza, Tipaza, Algeriac NMISSI Laboratory, Faculty of Science Technology, Biskra University, Biskra, Algeria
  Pages: 1 - 25
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-15T04:05:01Z
  DOI: 10.1080/15397734.2024.2315173
Stress-driven nonlocal integral model with discontinuity for
size-dependent buckling and bending of cracked nanobeams using Laplace
transform
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Pei ZhangHai Qinga School of Science; Xi’an University of Architecture Astronautics, Nanjing, China
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-15T04:00:10Z
  DOI: 10.1080/15397734.2024.2315167
Study on the aerodynamic performances and the operational safety of the
vehicle-bridge system under the crosswind
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jiahui ChenRui LiJianlin XuPeng LiWenhao ZhaoZheng PeijieKailong Jina School of Mechanical Engineering; Lanzhou Jiaotong University, Lanzhou, Chinab Tangshan Institute, Southwest Jiaotong University, Tangshan, Chinac School of Mechanical Engineering, Southwest Jiaotong University, Chengdu, China
  Pages: 1 - 23
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-15T03:57:26Z
  DOI: 10.1080/15397734.2024.2313604
Nonlinear vibrations of a linkage mechanism: theory and experiment
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Weijie PangHongli LiuYuyang ChaiFengming Lia College of Aerospace; Civil Engineering, Harbin Engineering University, Harbin, Chinab Key Laboratory of Operation Safety Technology on Transport Vehicles, Ministry of Transport, Beijing, Chinac Department of Civil Engineering, University of Siegen, Siegen, Germany
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-15T03:51:57Z
  DOI: 10.1080/15397734.2024.2310665
SABO algorithm for optimum design of truss structures with multiple
frequency constraints
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Vahid GoodarzimehrUmut TopalAmit Kumar DasTrung Vo-Duya Department of Civil Engineering; K. N. Toosi University of Technology, Tehran, Iranb Department of Civil Engineering, Shahid Bahonar University of Kerman, Kerman, Iranc Department of Civil Engineering, Karadeniz Technical University, Faculty of Technology, Trabzon, Turkeyd Indian Institute of Management, Mumbai, Indiae Deep Learning Architecture Research Center, Sejong University, Seoul, Republic of Korea
  Pages: 1 - 33
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-15T03:48:40Z
  DOI: 10.1080/15397734.2024.2308652
Probabilistic analysis of bolted joint anti-loosening under cyclic
transverse load
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zhiqun ZhengXianzhen HuangXinglin MiaoKaihui QiuZhiyuan JiangPengfei Dinga School of Mechanical Engineering; Steel Group Corporation, Wuhan Iron & Steel Co. LTD., Wuhan, China
  Pages: 1 - 27
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-13T02:41:37Z
  DOI: 10.1080/15397734.2024.2315157
Vibration analysis of double elastomer layered superstructures with
extended locally continuous support model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Arif UluMuzaffer MetinAytac Arikoglua Department of Mechanical Engineering; Istanbul Aydin University, Istanbul, Türkiyeb Department of Mechanical Engineering, Yildiz Technical University, Istanbul, Türkiyec Department of Aeronautical Engineering, Istanbul Technical University, Istanbul, Türkiye
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-12T11:14:25Z
  DOI: 10.1080/15397734.2024.2309521
Thermo-mechanical fracture analysis of porous functionally graded cracked
plate using XFEM
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Rahul KumarAchchhe LalB. M. SutariaAshok Magara Department of Mechanical Engineering; School of Engineering, P P Savani University, Surat, Gujarat, Indiab Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat, Gujarat, Indiac N. K. Orchid College of Engineering & Technology, Solapur, Maharashtra, India
  Pages: 1 - 20
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-08T03:38:39Z
  DOI: 10.1080/15397734.2024.2312175
Finite element simulation of steel plate springs stiffness in heavy
vehicles and investigation of influential factors
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: K. X. ZhaoZ. CuiSchool of Mechanical Engineering; North China University of Technology, Networked Vehicle Laboratory, Beijing, PR China
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-08T03:38:14Z
  DOI: 10.1080/15397734.2024.2305771
A novel torque application method for tensegrity structures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ziying CaoAni LuoHeping LiuYaming FengCollege of Mechanical; Electrical Engineering, Harbin Engineering University, Harbin, China
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-06T03:46:20Z
  DOI: 10.1080/15397734.2024.2309531
Improving torque-tension relationship in bolted joints: accurate threaded
surface representation and pressure distribution considerations
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jingdong ZhangJiaming FengWeihao LiRidong LiaoSchool of Mechanical Engineering; Beijing Institute of Technology, Beijing, China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-06T03:31:26Z
  DOI: 10.1080/15397734.2024.2308648
Study on ductile fracture behavior of hydrogen-charged API pipeline steel
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sung-Ju ParkByoungjae ParkKookhyun Kima Department of Marine Mobility; Tongmyong University, Busan, South Koreab Korea Research Institute of Ships Ocean Engineering, Daejeon, South Korea
  Pages: 1 - 16
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-06T03:31:23Z
  DOI: 10.1080/15397734.2024.2310659
Multiple equilibria of pinned FGP-GPLRC circular arches under a half-span
distributed radial load
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Zixiang ZhangYuanyuan LiuLulu LiuAirong LiuZhicheng Yanga School of Transportation; Civil Engineering Engineering, Guangzhou, China
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-05T03:50:20Z
  DOI: 10.1080/15397734.2024.2308660
A novel piecewise high-order differential interpolation with rapid
convergence to construct an ultrasmooth profile of high-speed cam with
optimal dynamic performance
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Jianwu YuKaifeng HuangHong LuoLin FuZhentao ShangChunming Fua College of Mechanical & Vehicle Engineering; Hunan University, Changsha, Chinab College of Mechanical Engineering, Nanhua University, Hengyang, Chinac College of Mechanical Technology, Changsha, China
  Pages: 1 - 17
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-02T04:22:27Z
  DOI: 10.1080/15397734.2024.2308653
Effect of the magnetic field on the thermomechanical flexural wave
propagation of embedded sandwich nanobeams
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mustafa Eroğluİsmail EsenMehmet Akif Koça Engineering Faculty; Mechanical Engineering Department, Sakarya University, Sakarya, Turkeyb Engineering Faculty, Mechanical Engineering Department, Karabük University, Karabük, Turkeyc Technology Faculty, Mechatronics Engineering Department, Sakarya Applied Sciences University, Sakarya, Turkey
  Pages: 1 - 33
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-02-01T11:27:41Z
  DOI: 10.1080/15397734.2024.2308659
Structural capacity of a composite slim-floor beam with hollow steel tube
shear connectors
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohamed S. MajdubShahrizan BaharomAhmed W. Al ZandAzrul A. Mutaliba Department of Civil Engineering; Faculty of Engineering Sustainable Township Research Centre (SUTRA), UKM, Bangi, Malaysiac Department of Civil Engineering, Elmergib University, Al Khums, Libya
  Pages: 1 - 33
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-30T06:07:32Z
  DOI: 10.1080/15397734.2024.2305777
Time-dependent fatigue reliability estimation and optimal design of
scraper chains under corrosive wear effect
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Shuai LiZhencai ZhuHao LuYujun XueGang Shena School of Mechatronics Engineering; Henan University of Science Technology, Xuzhou, China
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-30T01:30:00Z
  DOI: 10.1080/15397734.2024.2310651
Architected tunable twist-compression coupling metastructures based on a
generative parametric design for energy absorption and effective
mechanical properties
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Amirhossein IranmehrAfshin TafazoliMasoud AsgariResearch Laboratory of Passive Safety System; Faculty of mechanical engineering, K. N. Toosi University of Technology, Tehran, Iran
  Pages: 1 - 19
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-30T01:26:59Z
  DOI: 10.1080/15397734.2024.2308650
Large deflection response of functionally graded porous structures
considering geometrical nonlinearity using an improved FSDT
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Safieddine KalleliAbdessalem HajlaouiFakhreddine Dammaka LEE Laboratory; National Engineering School of Sfax, ENIS, University of Sfax, Sfax, Tunisiab ENIT, University of Tunis El Manar, Tunis, Tunisia
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-23T08:25:15Z
  DOI: 10.1080/15397734.2024.2305772
Enhanced design parameters of a cylindrical helical compression spring
using an optimization algorithm and a non-linear behavior model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Guillaume CadetManuel ParedesUPS; INSA, ISAE-SUPAERO, MINES-ALBI, CNRS, ICA, Université de Toulouse, Toulouse, France
  Pages: 1 - 12
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-22T10:35:49Z
  DOI: 10.1080/15397734.2024.2307376
Ensuring quick changeability of the working bodies of technological
machines in the construction and maintenance of the landscape,
road-building, and agricultural industries
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Dulat MambetovValeriy JundibayevUmirzak KasymovAssiya DanyarovaDaniyar Murzabekova Department of Transport; Transport Equipment Technology, L. N. Gumilyov Eurasian National University, Astana, Republic of Kazakhstan
  Pages: 1 - 13
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-22T10:33:05Z
  DOI: 10.1080/15397734.2024.2305783
Thermal buckling characterization of nanocomposite beams activated by PZT
with temperature-dependent characteristics considering the pyroelectricity
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Lvyuan OuyangLijun WangElham MoradiHadi Arvina Naval Architecture; Shipping College, Guangdong Ocean University, Zhanjiang, Guangdong, Chinab Guangdong Provincial Key Laboratory of Intelligent Equipment for South China Sea Marine Ranching, Guangdong Ocean University, Zhanjiang, Guangdong, Chinac Faculty of Engineering, Shahrekord University, Shahrekord, Irand Nanotechnology Research Institute, Shahrekord, University, Shahrekord, Iran
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-22T10:31:21Z
  DOI: 10.1080/15397734.2024.2305773
Dust emission evaluation of the flexible metal wheel over lunar terrain
and fender effect
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Kaidi ZhangJinglai WuYunqing ZhangJunwei Shia School of Mechanical Science; Technology, Wuhan, Chinab Aerospace System Engineering Shanghai, Shanghai, China
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-22T10:28:22Z
  DOI: 10.1080/15397734.2024.2303657
Presentation of a new 2D fast and straightforward version for the
Lemaitre’s ductile damage model
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohammad Soheil Sadeghi NezhadFarhad Haji AboutalebiMohammad Mashayekhia Department of Mechanical Engineering; University of Isfahan, Isfahan, Iranb Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-09T03:14:38Z
  DOI: 10.1080/15397734.2023.2301392
Aero-Hygro-Thermoelastic size-dependent analysis of NCMF-reinforced GNPs
sector microplates located between piezoelectric patches in supersonic
flow considering surface stress effects
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ehsan ArshidSaeed AmirAbbas LoghmanDepartment of Solid Mechanics; Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran
  Pages: 1 - 62
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-08T05:06:26Z
  DOI: 10.1080/15397734.2023.2295532
Optimizing seismic fragility assessments for high-speed railway track
bridges: a novel multi-parameter methodology and intensity measure
selection
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wangbao ZhouLijun XiongLizhong JiangYulin FengLingxu WuKang Penga School of Civil Engineering; Central South University, Changsha, PR Chinab National Engineering Laboratory for High-speed Railway Construction, Changsha, PR Chinac School of Civil Engineering, East China Jiaotong University, Nanchang, PR China
  Pages: 1 - 21
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-08T05:03:03Z
  DOI: 10.1080/15397734.2023.2301378
Nonlocal dual-phase-lag thermoelastic damping analysis in functionally
graded sandwich microbeam resonators utilizing the modified coupled stress
theory
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Wei PengBaocai Pana School of Architecture; Astronomy, Sun Yat-sen University (Zhuhai Campus), Zhuhai, Chinad Frontiers Science Center for TianQin, Sun Yat-sen University (Zhuhai Campus), Zhuhai, Chinae CNSA Research Center for Gravitational Waves, Sun Yat-sen University (Zhuhai Campus), Zhuhai, China
  Pages: 1 - 22
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-05T10:29:13Z
  DOI: 10.1080/15397734.2023.2300054
Nonlinear behaviour of epoxy and epoxy-based nanocomposites: an integrated
experimental and computational analysis
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mertol TüfekciTuğba BaytakOsman Bulutİnci PirSeren Acarer AratBurak ÖzkalHaibao LiuJohn P. DearLoïc Sallesa Department of Mechanical Engineering; Imperial College London, London, UKb Department of Civil Engineering, Istanbul Technical University, Maslak, Istanbul, Turkeyc Faculty of Mechanical Engineering, Istanbul Technical University, Beyoğlu, Turkeyd Department of Environmental Engineering, Istanbul University-Cerrahpaşa, Istanbul, Turkeye Department of Metallurgical Mechanical Engineering, University of Liège, Liège, Belgium
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-05T10:19:54Z
  DOI: 10.1080/15397734.2023.2293763
A new probabilistic long-period critical excitation procedure for isolated
building structures
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Arsalan BazrafshanNaser KhajiGoodarz Ahmadia Faculty of Civil; Aerospace Engineering, Clarkson University, Potsdam, NY, USA
  Pages: 1 - 29
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-03T07:18:33Z
  DOI: 10.1080/15397734.2023.2297242
Assessing the impact of manufacturing uncertainties on the static and
dynamic response of spur gear pairs
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Ranim NajibJessica NeufondFrancesco FrancoGiuseppe PetroneSergio De Rosaa Pasta-Lab; Universita degli Studi di Napoli Federico II, Napoli, Italyb Vibratec SA, Chemin du Petit Bois BP 36, Ecully Cedex, France
  Pages: 1 - 31
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-03T07:18:31Z
  DOI: 10.1080/15397734.2023.2295537
Stochastic critical buckling speed analysis of rim-driven rotating
composite plate using NURBS-based isogeometric approach and HSDT
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Mohamed NishadNarayan SharmaM. R. SunnyB. N. SinghD. K. MaitiDepartment of Aerospace Engineering; IIT Kharagpur, Kharagpur, India
  Pages: 1 - 28
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-03T07:10:45Z
  DOI: 10.1080/15397734.2023.2298738
Analysis of electromechanical coupling modal and dynamic response
characteristics of permanent magnet gear transmission system considering
variable load condition
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Song JiangWei LiEn LuLianchao Shenga School of Mechanical Engineering; Jiangsu University, Zhenjiang, Chinab School of Mechatronic Engineering, China University of Mining control of gear transmission system.
  Pages: 1 - 26
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-02T06:36:34Z
  DOI: 10.1080/15397734.2023.2299316
Revisiting the inertia matching condition for energy efficiency
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Paolo BoscariolDario RichiedeiDTG; Università degli Studi di Padova, Padua, Italy
  Pages: 1 - 15
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-02T06:29:54Z
  DOI: 10.1080/15397734.2023.2299312
Optimum design of planetary gear set using multi-objective optimization
considering mass, power loss and transmission error
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Beom-Soo KimWoo-Jin ChungSuchul KimYoung-Jun Parka Department of Biosystems Engineering; College of Agriculture Life Sciences, Seoul National University, South Koread Department of Smart Industrial Machinery, Korea Institute of Machinery & Materials, Daejeon, South Korea
  Pages: 1 - 24
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-01T05:00:02Z
  DOI: 10.1080/15397734.2023.2297259
Design of equi-strength annular disks made of functionally graded
materials
- Free pre-print version: Loading...
  Rate this result: What is this?
  
  Please help us test our new pre-print finding feature by giving the pre-print link a rating.
  A 5 star rating indicates the linked pre-print has the exact same content as the published article.
  
  Authors: Sergei AlexandrovMarina RynkovskayaYeau-Ren Jenga Laboratory of Technological Processes; Ishlinsky Institute for Problems in Mechanics of the Russian Academy of Sciences, Moscow, Russiab Academy of Engineering, RUDN University, Moscow, Russiac Department of Biomedical Engineering, National Cheng Kung University, Tainan, Taiwand Academy of Innovative Semiconductor Sustainable Manufacturing, National Cheng Kung University, Tainan, Taiwan
  Pages: 1 - 18
  Abstract: .
  
  Citation: Mechanics Based Design of Structures and Machines
  PubDate: 2024-01-01T05:00:01Z
  DOI: 10.1080/15397734.2023.2297241

HOME > Browse the 73 Subjects covered by JournalTOCs
Subject	Total Journals