 Subjects -> METALLURGY (Total: 58 journals)
|
|
|
- Precise glass microstructuring with laser induced backside wet etching
using error-compensating scan path- Abstract: Publication date: Available online 12 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Kui-Kam Kwon, Ki Young Song, Jae Min Seo, Chong Nam Chu, Sung-Hoon Ahn
- Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn
alloy with in situ micro-rolling- Abstract: Publication date: Available online 11 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Cheng Xie, Shengchuan Wu, Yukuang Yu, Haiou Zhang, Yanan Hu, Mingbo Zhang, Guilan Wang
- Contactless generation of cavitation in high temperature liquid metals and
its impact on particle dispersion in solidified iron and steel samples- Abstract: Publication date: Available online 10 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Mārtiņš Sarma, Ilmārs Grants, Thomas Herrmannsdörfer, Gunter Gerbeth
- Mechanical properties of hybrid additively manufactured Inconel 718 parts
created via thermal control after secondary treatment processes- Abstract: Publication date: Available online 9 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Jennifer Glerum, Jennifer Bennett, Kornel Ehmann, Jian Cao
- Thermally Sprayed Sensor Coatings for Spatially Resolved Temperature
Detection- Abstract: Publication date: Available online 8 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Kirsten Bobzin, Wolfgang Wietheger, Martin Andreas Knoch, Hendrik Heinemann, Andreas Schacht, Arnold Gillner, Marc Hummel
- Physical Mechanisms in Hybrid Additive Manufacturing: A Process Design
Framework- Abstract: Publication date: Available online 8 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Samantha Webster, Hui Lin, Fred Carter, Kornel Ehmann, Jian Cao
- Solid-State Cladding on Thin Automotive Sheet Metals Enabled by Additive
Friction Stir Deposition- Abstract: Publication date: Available online 6 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): W. Douglas Hartley, David Garcia, Jake K. Yoder, Eric Poczatek, Joy H. Forsmark, S. George Luckey, David A. Dillard, Hang Z. Yu
- Intentionally-induced dynamic gas film enhances the precision of
electrochemical micromachining- Abstract: Publication date: Available online 6 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Shunda Zhan, Yonghua Zhao
- Experimental calibration of ductile fracture parameters and forming limit
of AA7075-T6 sheet- Abstract: Publication date: Available online 6 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): Zhuoyun Yang, Changcai Zhao, Guojiang Dong, Zhiwei Chen
- Penetration and mixing of filler wire in hybrid laser welding
- Abstract: Publication date: Available online 5 January 2021Source: Journal of Materials Processing TechnologyAuthor(s): W. Suder, S. Ganguly, S. Williams, B.Y.B. Yudodibroto
- Microstructure and high-temperature wear behaviour of Inconel 625
multi-layer cladding prepared on H13 mould steel by a hybrid additive
manufacturing method- Abstract: Publication date: May 2021Source: Journal of Materials Processing Technology, Volume 291Author(s): Jingbin Hao, Fangtao Hu, Xiawei Le, Hao Liu, Haifeng Yang, Jing Han
- Mixed lubrication friction model including surface texture effects for
sheet metal forming- Abstract: Publication date: Available online 31 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Meghshyam Shisode, Javad Hazrati, Tanmaya Mishra, Matthijn de Rooij, Ton van den Boogaard
- Novel Chip-breaking Structure of Step Drill for Drilling Damage Reduction
on CFRP/Al Stack- Abstract: Publication date: Available online 29 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Fu-ji Wang, Meng Zhao, Rao Fu, Jian-bo Yan, Shen Qiu, Jia-xuan Hao
- Process Parameters and Formation Mechanism of SiCf/Ti6Al4V Composites
Manufactured by a Hybrid Additive Manufacturing Method- Abstract: Publication date: Available online 29 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Haiqiang Yang, Huicong Tang, Linghui Hao, Xiaoning Yang, Deliang Ren, Qingxuan Rana, Haibo Qia
- Friction stir butt welding of Magnesium alloy to Steel by Truncated
Cone-shaped Stirring Pin with Threads- Abstract: Publication date: Available online 29 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yongsheng Meng, Yuan Ma, Shuhai Chen, Yang Han, Shujun Chen, Jihua Huang, Jian Yang
- An Innovative Process Combination of Additive Manufacturing and Sheet Bulk
Metal Forming for Manufacturing a Functional Hybrid Part- Abstract: Publication date: Available online 28 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Marion Merklein, Robert Schulte, Thomas Papke
- Fabrication and evaluation of diamond thick film-Si3N4 brazed cutting tool
by microwave plasma chemical vapor deposition method- Abstract: Publication date: Available online 28 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Xin Song, Hua Wang, Xinchang Wang, Fanghong Sun
- Effects of laser shock peening on microstructural evolution and wear
property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool
steel- Abstract: Publication date: May 2021Source: Journal of Materials Processing Technology, Volume 291Author(s): H.F. Lu, K.N. Xue, X. Xu, K.Y. Luo, F. Xing, J.H. Yao, J.Z. Lu
- Study of chip formation mechanism in one-dimensional vibration-assisted
machining- Abstract: Publication date: May 2021Source: Journal of Materials Processing Technology, Volume 291Author(s): Shamsul Arefin, XinQuan Zhang, A. Senthil Kumar, Dennis Wee Keong Neo, Yang Wang
- Mechanical performance of 316 L stainless steel by hybrid directed
energy deposition and thermal milling process- Abstract: Publication date: Available online 22 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yuying Yang, Yadong Gong, Changhe Li, Xuelong Wen, Jingyu Sun
- A study on hot-working as alternative post-processing method for titanium
aluminides built by laser powder bed fusion and electron beam melting- Abstract: Publication date: Available online 19 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Irina Sizova, Alexander Sviridov, Markus Bambach, Mark Eisentraut, Susanne Hemes, Ulrike Hecht, Axel Marquardt, Christoph Leyens
- Enhancing Combined Cryogenic Mechanical Properties of Metastable
Austenitic Stainless Steel by Warm Forming- Abstract: Publication date: Available online 19 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Qunjie Lu, Jinyang Zheng, Gai Huang, Keming Li, Huiming Ding, Zhenyu Wang, Shaoan Cheng
- Interface strength and mechanical properties of Inconel 718 processed
sequentially by casting, milling, and direct metal deposition- Abstract: Publication date: Available online 18 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): F. Soffel, D. Eisenbarth, E. Hosseini, K. Wegener
- Multi-jet hydrodynamic surface finishing and X-ray computed tomography
(X-CT) inspection of laser powder bed fused Inconel 625 fuel
injection/spray nozzles- Abstract: Publication date: Available online 16 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Arun Prasanth Nagalingam, Jian-Yuan Lee, S.H. Yeo
- Binder jetting additive manufacturing of 316 L stainless-steel green
parts with high strength and low binder content: binder preparation and
process optimization- Abstract: Publication date: Available online 15 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yiwei Mao, Jingwen Li, Wei Li, Daosheng Cai, Qingsong Wei
- Toward the use of small size bulge tests: Numerical and experimental study
at small bulge diameter to sheet thickness ratios- Abstract: Publication date: Available online 15 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): V. Lafilé, B. Galpin, L. Mahéo, C.C. Roth, V. Grolleau
- External-internal composite spinning technology for forming thin-walled
Ω-sectioned ring of superalloy- Abstract: Publication date: Available online 13 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Guangda Shao, Hongwei Li, Xin Zhang, Mei Zhan, Zhijun Li, Qiao Liu
- Improving the surface integrity and mechanical properties of additive
manufactured stainless steel components by wire electrical discharge
polishing- Abstract: Publication date: Available online 13 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Jibin Bobana, Afzaal Ahmed
- Characteristics of bypass coupling twin-wire indirect arc welding with
high-speed welding mode- Abstract: Publication date: Available online 11 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Dongting Wu, Qi An, Kenji Matsuda, Yongang Zhang, Baojun Yu, Yong Zou
- Electromagnetic forming of aluminum alloy sheet metal utilizing a
low-frequency discharge: a new method for attractive forming- Abstract: Publication date: Available online 10 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Shaowei Ouyang, Changxing Li, Limeng Du, Xiaoxiang Li, Zhipeng Lai, Tao Peng, Xiaotao Han, Quanliang Cao, Liang Li
- Effect of powder feeding mode on the stability and nitrogen distribution
of high nitrogen steel welding process- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Bingwei Li, Zhenglong Lei, Shibo Wu, Yuan Chen, Yanbin Chen, Ying Xiong
- Single-track investigation of IN738LC superalloy fabricated by laser
powder bed fusion: Track morphology, bead characteristics and part quality
- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Chuan Guo, Zhen Xu, Yang Zhou, Shi Shi, Gan Li, Hongxing Lu, Qiang Zhu, R. Mark Ward
- Mechanisms for influence of post-deformation annealing on microstructure
of NiTiFe shape memory alloy processed by local canning compression- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yanqiu Zhang, Shuyong Jiang, Ming Tang, Bingyao Yan, Junbo Yu, Chengzhi Zhao
- A new ductile fracture criterion for skew rolling and its application to
evaluate the effect of number of rolls- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Koji Yamane, Kazuhiro Shimoda, Koichi Kuroda, Shohei Kajikawa, Takashi Kuboki
- Deflection prediction of micro-milling Inconel 718 thin-walled parts
- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Zhenyuan Jia, Xiaohong Lu, Han Gu, Feixiang Ruan, Steven Y. Liang
- Experimental investigations on deformation characteristics in
microstructure level during incremental forming of AA5052 sheet- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Zhidong Chang, Mei Yang, Jun Chen
- Applying a softening adapted deformation acceleration to the hot
compression of the TiAl alloy TNM-B1 using a hot workability and damage
tolerance improving heat treatment- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): J.A. Stendal, M. Eisentraut, M. Imran, I. Sizova, S. Bolz, S. Weiß, M. Bambach
- Texture evolution and corrosion behavior of the AA6061 coating deposited
by friction surfacing- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Mingrun Yu, Hongyun Zhao, Zili Zhang, Li Zhou, Xiaoguo Song, Ninshu Ma
- Dissimilar unbeveled butt joints of AA6061 to S235 structural steel by
means of standard single beam fiber laser welding-brazing- Abstract: Publication date: Available online 8 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): D. Wallerstein, F. Lusquiños, R. Comesaña, J. Del Val, A. Riveiro, A. Badaoui, J. Pou
- Investigation on coaxial visual characteristics of molten pool in
laser-based directed energy deposition of AISI 316L steel- Abstract: Publication date: Available online 5 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Zi-jue Tang, Wei-wei Liu, Li-na Zhu, Zhi-chao Liu, Zhao-rui Yan, Dong Lin, Zhao Zhang, Hong-Chao Zhang
- A comparative study of Ni75Fe25 microcomponents fabricated by
microelectroforming and micromolding- Abstract: Publication date: Available online 5 December 2020Source: Journal of Materials Processing TechnologyAuthor(s): Bo Zhou, Bo Su, Min Li, Aijun Zhang, Jiesheng Han, Junhu Meng
- Mathematical modeling of cutting layer geometry and cutting force in
orthogonal turn-milling- Abstract: Publication date: Available online 28 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Tao Sun, Lufang Qin, Yucan Fu, Chengqiang Liu, Rongling Shi
- Tribological behaviour of 316L stainless steel additively manufactured by
laser powder bed fusion and processed via high-pressure torsion- Abstract: Publication date: Available online 27 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Shahir Mohd Yusuf, Daryl Lim, Ying Chen, Shoufeng Yang, Nong Gao
- Fabrication of a Ni/SiC Composite Coating on Steel Surface with Excellent
Corrosion Inhibition Performance- Abstract: Publication date: Available online 27 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Jing Li, Ouchuan Lin, Cheng Cheng, Weibing Wang, Chengyu Xu, Luquan Ren
- Tribological performance and wear mechanism of smooth ultrananocrystalline
diamond films- Abstract: Publication date: Available online 25 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Hua Wang, Xin Song, Xinchang Wang, Fanghong Sun
- Monitoring method for femtosecond laser modification of silicon carbide
via acoustic emission techniques- Abstract: Publication date: Available online 25 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Xiaozhu Xie, Yuliang Zhang, Qingpeng Huang, Yajun Huang, Wei Zhang, Jiafa Zhang, Jiangyou Long
- Modeling of force and temperature in cutting of particle reinforced metal
matrix composites considering particle effects- Abstract: Publication date: Available online 25 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Wei Sun, Chunzheng Duan, Wendian Yin
- Laser induced metallization on flexible polymer coating: analysis and
application- Abstract: Publication date: Available online 24 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Hung-Yin Tsai, Elisabetta Ceretti, Davide Rizzi, Paola Ginestra, Tuan-Huan Kao, Ming C. Leu
- Experiment and simulation of variable thickness rolling for 3D-profiled
blank- Abstract: Publication date: Available online 22 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Sai Wang, Xiaogong Wang, Xianghua Liu, Changsheng Li
- Mechanical Properties and Microstructure of 316L Stainless Steel Produced
by Hybrid Manufacturing- Abstract: Publication date: Available online 22 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Thomas Feldhausen, Narendran Raghavan, Kyle Saleeby, Lonnie Love, Thomas Kurfess
- Mechanics analysis and predictive force models for the single-diamond
grain grinding of carbon fiber reinforced polymers using CNT
nano-lubricant- Abstract: Publication date: Available online 21 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Teng Gao, Changhe Li, Min Yang, Yanbin Zhang, Dongzhou Jia, Wenfeng Ding, Sujan Debnath, Tianbiao Yu, Zafar Said, Jun Wang
- Investigation of jet and micro-gap discharge in Cu-Al plates EMPW process
- Abstract: Publication date: Available online 21 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yan Zhou, Chengxiang Li, Xianmin Wang, Zhigang Liao, Xin Shi, Ting Shen, Jian Du, Chenguo Yao
- Springback behavior and a new chord modulus model of Copper alloy during
severe plastic compressive deformation- Abstract: Publication date: Available online 21 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Hongli Hou, Guoqun Zhao, Liang Chen, Huiping Li
- Fretting wear behaviors of APS AT40 coating and Al2O3/AT40 composite
coating on TC6 alloy- Abstract: Publication date: Available online 21 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Shuang Wu, Xiangqing Wu, Shaoqing Wang, Faqin Xie
- Vibration-free surface finish in the milling of a thin-walled cavity part
using a corn starch suspension- Abstract: Publication date: Available online 20 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): S.Q. Wang, C.L. He, J.G. Li, J. Wang
- Process responses during µFSW of AA6061-T6 under the influence of
triple-spiral micro-grooves on shoulder end-surface- Abstract: Publication date: Available online 20 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Shuja Ahmed, Mayank Verma, Probir Saha
- Analytical model and experimental verification of Poisson burr formation
in ductile metal machining- Abstract: Publication date: April 2021Source: Journal of Materials Processing Technology, Volume 290Author(s): Xueqin Pang, Yuning Zeng, Jiayang Zhang, Wenjun Deng
- Bonding and microstructure evolution in electromagnetic pulse welding of
hardenable Al alloys- Abstract: Publication date: April 2021Source: Journal of Materials Processing Technology, Volume 290Author(s): Z. Li, E. Beslin, A.J. den Bakker, G. Scamans, M. Danaie, C.A. Williams, H. Assadi
- Extracting HCP Zerilli-Armstrong Material Parameters For Magnesium Alloy
AZ31B From Orthogonal Cutting Tests- Abstract: Publication date: Available online 20 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Charbel Y. Seif, Ilige S. Hage, Ramsey F. Hamade
- Novel strategy for quality improvement of up-facing inclined surfaces of
LPBF parts by combining laser-induced shock waves and in-situ laser
remelting- Abstract: Publication date: Available online 20 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Jitka Metelkova, Daniel Ordnung, Yannis Kinds, Brecht Van Hooreweder
- Evolving asymmetric yield surfaces of quenching and partitioning steels:
Characterization and modeling- Abstract: Publication date: Available online 20 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yong Hou, Junying Min, Nan Guo, Yifei Shen, Jianping Lin
- Microstructural and mechanical evaluation of submerged arc welded HSLA
4135 steel by modeled and manufactured granular Cr-Mo bonded active basic
flux- Abstract: Publication date: Available online 29 August 2020Source: Journal of Materials Processing TechnologyAuthor(s): Mahdi Alishavandi, Mahdi Mohammadmirzaei, Mahnam Ebadi, Amir Hossein Kokabi
- Experimental and Numerical Analysis OF FILLER METAL STEMET 1301A FOR
CONNECTION OF MOLYBDENUM WITH STEEL 12CR18NI10ТI- Abstract: Publication date: Available online 28 March 2020Source: Journal of Materials Processing TechnologyAuthor(s): I.Е. Lublinsky, O.N. Sevryukov, А.V. Vertkov, А.А. Ivannikov, M.А. Penyaz, I.V Fedotov, А.S. Peklich, Е.R. Abramov
- Effect of Cr content in Ni-based amorphous filler on microstructure and
shear strength of K4169 nickel-based alloy brazed joint- Abstract: Publication date: Available online 16 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Honggang Dong, Jiang Yang, Yueqing Xia, Xingxing Xu, Peng Li, Chuang Dong, Jingyang Chen, Na Liu, Liang Zheng
- Parametric modeling of uncut chip geometry for predicting crater wear in
gear skiving- Abstract: Publication date: Available online 16 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Zongwei Ren, Zhenglong Fang, Takuhiro Arakane, Toru Kizaki, Tsukasa Nishikawa, Yannan Feng, Junshi Kugo, Eiji Nabata, Naohiko Sugita
- Migration from the traditional to the smart factory in the die-casting
industry: novel process data acquisition and fault detection based on
artificial neural network- Abstract: Publication date: Available online 16 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Jeongsu Lee, Young Chul Lee, Jeong Tae Kim
- Analytical modelling of full single-track profile in wire-fed laser
cladding- Abstract: Publication date: Available online 16 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Jinyi Li, Hao Nan Li, Zhirong Liao, Dragos Axinte
- Oil mist concentration and machining characteristics of SiO2 water-based
nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling
- Abstract: Publication date: Available online 7 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Tao Lv, Xu Xuefeng, Aibing Yu, Xiaodong Hu
- Enhancement of removing inclusions from liquid melt film during the ESR
process assisted by a static magnetic field- Abstract: Publication date: Available online 7 November 2020Source: Journal of Materials Processing TechnologyAuthor(s): Yifeng Guo, Zhibin Xia, Zhe Shen, Qiang Li, ChuXiong Sun, Tianxiang Zheng, Weili Ren, Zuosheng Lei, Yunbo Zhong
|
Hybrid journal (It can contain Open Access articles)
